• Animal cells and systems
• /
• v.12 no.1
• /
• pp.41-46
• /
• 2008

A bacterium strain called Bacillus coagulans was isolated from an industrial wastewater drainage and selected for its antimicrobial activities against bacteria and fungi. Characterization studies strongly suggested that this strain is Bacillus coagulans. Antimicrobial activity was found against gram-positive, gram-negative bacteria and yeast strain. Maximal activity was observed after 24 h when incubated at $30^{\circ}C$ and pH 8. The activity was found to be stable at $75^{\circ}C$ for 30 min and at pH range of 2-12. Analysis of the antimicrobial compound by SDS-PAGE suggested a molecular mass of approximately 7.5 KDa. The substance was characterized as a bacteriocin, because of its proteinaceous nature and low molecular weight. Our bacteriocin could potentially be used as a food preservative, because of its thermostable property and broad antimicrobial spectrum.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1382-1384
• /
• 1998

Electroluminescence is occurred when phosphor is located in electric field. Object of this research show new type of powder electroluminescent device (PELD) for high brightness compared with conventional PELD. New type of PELD structured as follow ITO/phosphor + dielectric/Silver paste). To investigate optical properties of PELDs, EL spectrum, CIE coordinate system, Brightness of PELDs was measured. The suitable ratio between phosphor and dielectric in new type of PELD was 7:3(phosphor:dielectric). At 200 V 400 Hz, new type of PELD which had ratio of 7:3 was 5700 cd/$m^2$.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1255-1257
• /
• 1998

In this study,$ 5{\times}5$ dot-matrix display was implemented with powder electroluminescent device (PELD). Generally PELD which have a luminance from powder phosphor with electric field, inserted phosphor and dielectric layer between electrodes is basic structure. To make high brightness PELD compared to conventional device, new type of PELD was proposed as follows. New PELD had only one layer, which was mixed phosphor (ZnS:Cu) and dielectric (BaTiO3) material appropriately between electrodes. To compare and estimate the conventional and new type of PELD, the EL spectrum, transferred charge density, brightness and decay time was measured. As above result, we fabricated a hish brightness $ 5{\times}5$ dot-matrix display with new type of PELD. Its brightness was 6400 $cd/m^2$ at 200 V, 400Hz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.105-108
• /
• 2002

We report on the polarization-insensitive design and fabrication of an arrayed waveguide gratings (AWG's) using sol-gel derived silica glass films formed on fused silica substrates to provide cheap and stable tools for better design. An arrayed-waveguide grating multiplexer with raised structure is fabricated in order to effect polarization sensitivity. Since polarization is usually not known after propagation in an optical fiber. passive WDM components such as monolithic wavelength demultiplexer have to be polarization insensitive. Here, we observed that polarization have effect on crosstalk of output spectrum in arrayed-waveguide grating

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.269-272
• /
• 2000

In this paper, we was fabricated and analyzed a blue organic electroluminescent devices with the organic dye, such as 1,1,4,4-Tetraphenyl-1,3-butadi-ene(TPB). The device was made by simultaneously co-depositing two materials. The device structure was composed of the ITO glass, TPD, Alq$_3$doped TPB, and aluminum(A1) electrode. Carrier injection from the two electrodes was significant]y observed and the blue light in EL spectrum, with an emission maximum at 462nm, was triggered at a driving voltage of 11V.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.739-744
• /
• 2006

In this paper, we report numerically calculated results of testing a temperature-insensitive refractive sensor based on a planar-type long-period waveguide grating (LPWG). The LPWG consists of properly chosen polymer materials with an optimized thermo-optic coefficient for the core layer in a four-layer waveguide structure. The resonant wavelength shift below the spectral resolution of the conventional optical spectrum analyzer is obtained accurately over a temperature change of ${\pm}7.5^{\circ}C$ even without any temperature control. The refractive index sensitivity of the proposed grating scheme is about 0.004 per resonant wavelength shift of 0.1 nm for an optimized thermo-optic coefficient.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.242-243
• /
• 2005

The SrS:Ag, Cl thin films have been grown by the hot wall technique with S furnace placed on the outside of the growth chamber in order to investigate the crystallographic and optical characteristics. The XRD patterns indicate a strongly preferential orientation in the [200] direction. The PL spectrum has an emission peak of about 398nm which is assigned by the transition from $4d^{95}s^1$ to $4d^{10}$ of$Ag^+$ center.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.194-197
• /
• 2003

A new 2,5-di(t-octylphenoxy) group substituted poly(p-phenylenevinylene) derivative was synthesized by Gilch polymerization. The obtained polymer was characterized by NMR, FT-IR, and chemical analysis and completely soluble in common organic solvents. The polymer showed good thermal stability with T$_{g}$ of 105$^{\circ}C$. The polymer dissolved in chloroform showed maximum emission at 514 nm with a shoulder peak at around 560 nm. The EL spectrum of the ITO/PEDOT/TOP-PPV/Al device was observed maximum emission at 545 nm with a shoulder peak at around 585 nm.m.

• The Korean Journal of Mycology
• /
• v.21 no.2
• /
• pp.140-145
• /
• 1993

Yeast strains were isolated from healthy women(36 isolates), infertile women(15 isolates) and women suffering from local morbidity(82 isolates). On the basis of 37 different physiological and morphological characteristics, the isolated 133 yeast strains were assigned to 10 species belonging to 5 genera. Four pathogenic species were identified. They were Candida albicans, Candida parapsilosis, Candida tropicalis and Trichosporon beigelii. Candida albicans was the dominant species, whereas Saccharomyces cerevisiae prevailed among the saprophytic species. The percentage occurrence as well as the pattern of yeast species differed in the diagnostic groups. It was higher in the women suffering from local morbidity than in the healthy and infertile women. Moreover, a wider spectrum of species was isolated from this group. Women with intrauterine contraceptive devices showed the highest percentage of yeast occurrence which reached 50% of those tested. Five different antifungal agents were tested fro their effects on the growth of the isolated yeast species in vitro. Nystatin was the most effective against the isolated yeast species, followed by pyrithion zink and ciclopiroxolamine, whereas micronazole and clotrimazole, showed a lesser effect.