• Journal of Information Display
• /
• v.2 no.2
• /
• pp.45-51
• /
• 2001

Four types of conjugated polymers, poly(MEHPV-PV), poly(MEHPV-BPV), poly(MEHPV-AV) and poly(PZV-AV) were synthesized by Homer-Emmons reaction using potassium tert-butoxide. The Homer-Emmons reaction gave electroluminescent(EL) copolymers in good yield. Of the EL copolymers synthesized, poly(PZV-AV) containing phenothiazinylene vinylene and anthrylene vinylene as repeat unit exhibited red color in the light emitting diode(LED) which was very close to the NTSC standard red. Besides, double layer LED made with $Alq_3$ electron transport layer exhibited both enhanced emission intensity and efficiency compared to the single layer LED.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.2 s.11
• /
• pp.21-24
• /
• 2005

Ink-jetting characteristics of pulse width and pulse amplitude for a piezoelectric ink jet printer driver have been mapped with various polymer EL ink. In this study, the jetting characteristics have been classified into 4 regime; no Jetting, unstable jetting, stable jetting, and spraying, and the importance of fluid viscosity on the scope of the stable jetting regime has been emphasized. The relation between jetting speed and the width and amplitude of driving signal has also been investigated and the effect of the speed on the jetting characteristics has been discussed.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.261-264
• /
• 2000

Organic light emitting diodes(OLEDs) have been expected to find an application as a new type of display since C. W. Tang and VanSlyke first reported on high performance OLEDs. This paper has been stuied a green organic EL device using dye doped emitting layer such as C6(Coumarin 6). In the Alq-based e]ectroluminescence diodes, we applied highly fluorescent molecular(Coumarin 6) and obtained enhancement in the electroluminescence efficiency.

• Electrical & Electronic Materials
• /
• v.15 no.1
• /
• pp.13-21
• /
• 2002

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.23-27
• /
• 2006

Recently, Top emission organic light-emitting diode (TEOLED) has been attracted by their potential application for the development of flat panel display (FPD). We have fabricated the high luminance top emission organic-emitting diode (TEOLED) using dual cathode layer and three top emitting structure. These devices were characterized by electroluminescence (EL) and current density-voltage (J-V) measurements. After compared it with Au anode structure, luminance of the device using dual anode was better than using without Al device. Consequently, Al layers are very good candidates for a promising electron-injecting buffer layer for top emission light-emitting diode (TEOLED).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.57-60
• /
• 2002

In generally, the guest-emitter doped system has been reported to give a bright electroluminescence(EL). The purpose of using doped system is to improve for increasing lifetime and efficiency, and tuning multicolor light. This indicates an enhanced electron-hole recombination rate in emitting layer. The purpose of this study is to obtain the high performance EL devices for flat panel display with red emission. We fabricated EL devices using the guest-host system. where DCM derivatives were taken as a dopant. The devices are fabricated in multilayer system with various concentration of the dopant (red light emitting dye). We measured the I-V characteristics and EL spectra from these devices. and we compared with photoluminescence(PL) quantum yield among the DCM derivatives. The emission mechanism of devices is participated in energy transfer. The energy transfer from these hosts to DCM generates luminescence spectra that vary from yellow red to red, depending on DCM derivatives. Absorption and emission spectra of organic materials composing the devices depend on the emission materials doped with the DCM derivatives. We demonstrated that the high EL efficiency can be achieved by doping host material with DCM derivatives and molecular steric structures

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.10-13
• /
• 2007

We synthesized new blue and bluish green emitting materials by using fully substituted ethylene moieties. Multi-layered EL devices were fabricated with synthesized materials and evaluated in terms of emission color and luminescence efficiency. TBBPE[EML 2] device showed bluish-green CIE value of (0.236, 0.412) and 5.02cd/A at $10mA/cm^2$. BPBBPE[EML 3] device also showed sky-blue CIE value of(0.218, 0.355) and 2.31cd/A at $l0mA/cm^2$.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1526-1528
• /
• 1999

In this papaer, 7-segment was implemented using AC powder EL. ZnS:Cu and $BaTiO_3$ was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectic layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display. driving circuit. software for driving. The properties of fabricated devices was measured with EL spectrum. brightness and J-V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.579-581
• /
• 2004

A new DCM derivative containing the phenoxazine moiety (DCPXZ) has been synthesized for use as a red fluorescent dye molecule in organic light-emitting diodes (OLEDs). The photoluminescence and electroluminescence properties of DCPXZ were examined. The maximum photoluminescence of DCPXZ in chloroform solution ($10^{-5}$ mol) was observed at 616 nm. EL devices were fabricated with the structure ITO/PEDOT-PSS/Cu-PC(15nm)/${\alpha}$-NPD(45nm)/$Alq_3$:DCPXZ(30nm)/$Alq_3$(30nm)/LiF(0.5nm)/Al. The maximum EL emission for the 2.0% DCPXZ-doped device was at 608 nm with CIE coordinates (0.57, 0.42). The EL device exhibited a maximum brightness of 15,000 cd/$m^2$ at 19.4 V and a power efficiency of 1.04 lm/W at a luminance of 100 cd/$m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.948-951
• /
• 2003

The electroluminescence (EL) properties were studied in organic light-emitting diodes with a red fluorescent dye, 4- (dicyanomethylene)- 2- tert-butyl-6 (1,1,7,7-tetramethyljulolidyl-9-enyl)- 4H- pyran (DCJTB) doped into tris-(8-hydroxyquinoline)aluminum ($Alq_{3}$), rubrene and the mixed matrix of $Alq_3$ and rubrene. The device with DCJTB doped into the $Alq_{3}$:rubrene mixed host shows an efficient red emission from DCJTB with a negligible EL emission from $Alq_{3}$ and a lower EL onset voltage compared to the device with DCJTB doped into the $Alq_{3}$ only host. The quantum efficiency is almost temperature-independent for the device with the $Alq_3:rubrene$ mixed host. The results indicate that recombination of injected electrons and holes occurs on rubrene and subsequent energy transfer to DCJTB dominates in the device with the $Alq_{3}$:rubrene mixed host.