• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1334-1337
• /
• 2005

Orange-yellow phosphor has been synthesized by solid-state method for inorganic EL devices. Zinc sulfide is used as host material for the phosphor and the phosphor consists of copper and manganese as activators. The dependence of the photoluminescence (PL) and electroluminescence(EL) properties on the copper and manganese concentrations has been investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.917-919
• /
• 2003

The effect of conducting carbon layer on the performance of AC thin film EL display was examined. It was found that incorporation of small amount of carbon nano-tube and conducting additive greatly improve the luminance of the inorganic EL compared to the one with only conducting carbon black.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.713-716
• /
• 2007

This paper presents the fabrication of an electro-luminescence display, which is whollyprinted on a flexible paper substrate. We expect that the printed EL display can be a powerful alternative for general advertisement which is printed only with media ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.351-354
• /
• 2006

We developed highly efficient fluorescent dopants for full-color OLEDs. For blue, green and red OLEDs, current efficiencies of 8.7cd/A, 20.5 cd/A and 11.4 cd/A at $10mA/cm^2$ were achieved, respectively. Lifetime of the blue device was estimated to be 23,000hours at an initial luminance of $1,000cd/m^2$. Moreover, long lifetime over 100,000 hours was estimated in the green and red devices. Furthermore, we obtained a three-component white OLED by using these new fluorescent materials. This white OLED shows a current efficiency of 16.1cd/A with extrapolated lifetime over 70,000 hours at $1,000cd/m^2$, and more excellent color reproducibility for full-color displays with color filters and general lighting, compared to previous fluorescent white OLEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.914-916
• /
• 2003

Novel red organic electroluminescent (EL) dye, RED was developed for an application to the emission layer of EL device. Well known red material DCJTB was also used for comparison. Two kinds of devices were fablicated; one is ITO/ CuPc / TPD / 0.5% RED-1 in Alq3/ Alq3/ Li20/ Al and the other is ITO/ CuPc /TPD / 0.5% DCJTB in Alq3/Alq3/ Li20 / Al. External quantum efficiency of the EL device with RED was two times higher than that of the device with DCJTB. The maximum EL peak was detected at 635nm in the RED EL device.

• 방송과미디어
• /
• 제6권4호
• /
• pp.66-78
• /
• 2001

• 인포메이션 디스플레이
• /
• 제4권1호
• /
• pp.36-39
• /
• 2003

• 전력전자학회논문지
• /
• 제14권5호
• /
• pp.355-364
• /
• 2009

디스플레이 광원으로 많이 사용되고 있는 EL(Electro-Luminescence)은 특히 면광원 형태로 광고용 판넬에 많이 이용되고 있다. 면광원 EL을 최상의 조건으로 구동하기 위해서는 EL의 부하특성을 알아야 할 필요가 있으며, 본 논문에서는 광고용 판넬의 광원으로 사용되는 EL의 부하특성을 분석하기 위한 모델링을 수행하고 이를 기반으로 EL 시트를 구동하기 위한 인버터의 설계를 수행한다. 얻어진 부하 모델을 통해 인버터의 토폴로지 선정은 물론 구동 설계 파라미터를 제시하고, 시뮬레이션 및 실험을 통하여 설계된 EL 구동 시스템의 타당성과 그 구동 특성을 검증한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.809-812
• /
• 2003

본 논문에서는 차세대 평판디스플레이(FPD)로 대두되고 있는 EL의 발광 원리, 종류 및 구조를 살펴보고 분광방사휘도계(CS-1000)로 무기 EL의 휘도를 측정하여 색좌표 및 분광그래프를 비교 분석하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1432-1435
• /
• 2005

We report failure mode observed in polymer EL blue devices, relating with life curve. The modes are analyzed by observing compositional and morphological variation using TEM-EDX, STM, and reverse engineering method as destructive ways, and also investigated mobility changes of hole and electron by measuring transient EL as a nondestructive way corresponding to life curve. We believe that the postulated failure modes in polymer EL devices can present right directions to obtain better performance, especially life time, of polymer devices in material and device structural designing points of view.