• Journal of Environmental Health Sciences
• /
• 제23권1호
• /
• pp.105-108
• /
• 1997

For the removal of heavy metals, Cd, Cu and Cr were used. The initial concentration of Cd and Cu were 1-10 ppm, the removal efficiency of Cd and Cu was 76.2-89.0% and 69.0-79.0%, respectively. The initial concentration of Cr were 1~5 ppm, and the-removal efficiency was low especially at high concentration. In general, the initial concentrations of heavy metals had no relation to the removal efficiency. At the beginning, the removal efficiency was very high, but it was maintained at constant concentration. The trends of accumulations of heavy metals in the stem increased in proportion to the initial concentration. The removal efficiency of heavy metals increased a little bit when nutrients existed in the solution. So that, the initial concentration of Cd and Cu were 1-10 ppm, the removal efficiency of Cd and Cu was 84.8-91.0% and 75.9-82.0%. The initial concentration of Cr were 1-5 ppm, the removal efficiency was 25.0-67.0%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제24권5호
• /
• pp.345-350
• /
• 2011

This paper was carried about optimization for high efficiency of point contact solar cell. We have studied on the characteristics of power converter according to each parameter for the optimization for high efficiency of point contact solar cell on this study. We have 25.1352% of convert efficiency after adapt optimal parameters as mentioned in point body and superior conclusion is drawn by comparison with general efficiency has within 20%. At this time, the value of parameter is 100 um cell pitch, 0.01 um AR coating, 0.9 um N+ FSF thickness., etc. This study will continue to go on for optimization for efficiency in future, as it looks now, the results of this study would contribute to the business of high efficiency of point contact solar cell.

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권2호
• /
• pp.165-178
• /
• 2000

In this study the effects of block distance have been investigated on the particle deposition efficiency in the collecting cell of two-stage electrostatic precipitator by numerical analysis. Particle trajectories have been changed by the electrostatic and inertial force of particle with the inlet velocity electrostatic number and particle diameter. The total deposition efficiency has a minimum value by the interaction between the effect of particle inertial force and electrostatic force in the collecting cell. The increase of block distance makes the total deposition efficiency decrease under the range of the particle size which has the minimum deposition efficiency. However beyond the range of particle size which has minimum deposition efficiency total deposition efficiency has no trend with the variation of block distance.

• Knowledge Management Research
• /
• 제15권2호
• /
• pp.147-164
• /
• 2014

This paper investigated the efficiency of automobile firms by using several non-parametric approaches. First, using Data Envelopment Analysis (DEA), the paper has investigated the critical factors that determine the relative efficiency of management performance in automobile companies. Second, we examined how the firm size impact on the difference of this efficiency by using Kruskl-Wallis Test. Third, by using Mann-whitney test, we also investigated the difference of the efficiency accoss existence of technological innovation activity. Finally, the paper explored the relationship between technological innovation and management efficiency by using logistic regression model. The findings of this study provided practical information for inefficient automobile firms to find benchmarking firms and strategic position to improve their efficiency. The result also provided theoretical and methodological implications for those who explore factors affecting management efficiencies. Future research directions with the limitation of the study are discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제37권3호
• /
• pp.82-88
• /
• 2014

The government expands its investment on R&D programs for economic growth, thus there is growing attention on the result of R&D Programs. This study proposes more improved measuring method for efficiency when the number of R&D programs is not enough to be for measuring efficiency analysis. It provides more various application method of factors on efficiency analysis. This study analyzes the influence of each input factor on efficiency by using partial efficiency concept. And it also determines input factors in similar influence throughout Spearman correlation coefficient. Finally, it suggests new method to improve discriminatory power of efficiency analysis by determining representative factors. Also, the proposed method can be practiced not only for national R&D programs, but also for other fields of research.

• Journal of Korean Society of Water and Wastewater
• /
• 제21권2호
• /
• pp.177-185
• /
• 2007

Hydraulic efficiency($T_{10}/T$) in clearwell is often estimated by L/W ratio. However, this estimation is not accurate because other factors which give an effect on hydraulic efficiency such as shape of basin, diffuser wall and intra-basin is ignored. Therefore, in this research, hydraulic efficiency is predicted by the quantitative analysis of dead zone using CFD simulation in a pilot scale clearwell. The results show that the reason why higher L/W ratio increase the hydraulic efficiency is to decrease the dead zone of linear region which is located between baffles. Diffuser wall or intra-basin also affects on hydraulic efficiency with this process. Also, we conclude that hydraulic efficiency can not be reached to 0.8 or higher.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제17권12호
• /
• pp.1341-1346
• /
• 2004

The OLED research is gone for two directions. One is material development research, and another one is structural improvement part. All two are thing to heighten luminescence efficiency of OLED. n other to improve luminescence efficiency of OLED Electron - hole pairs must consist much more in the device Their profiles are sensitive to mobility velocity of electrons and holes. In this paper, we demonstrate the difference of velocity between hole and electron by experiments, and compare with a data of simulation and experiment changing hole carrier transport layer thickness, so we get the optimal we improve luminescence efficiency. We suggest improving the efficiency of OLEDS would be to balance the injection of electrons and holes into light emission layer of the device. And, we improve understanding of the various luminescence efficiency through experiments and numerical analysis of luminescence efficiency in variable hole carrier transport layer's thickness.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2227-2232
• /
• 2003

For a reasonable analysis of grade efficiency of cyclone separator, in-line measurements of particle size and particle concentration are needed. The purpose of this study is to define the correlation of measurement data and to measure grade efficiency and pressure drop. The authors adapted that the grade efficiency could be calculated directly from the counted particle numbers. The problem of collection efficiency calculation was different from counting rate of aerosol counters under the same conditions. It is important factor to use the rate of the particle counters to obtain reliable results. Therefore, the authors should use and calculate compensation factor considering sensitivity of aerosol counters, gas velocity and concentration affect higher 30% than originally measured grade efficiency. As the pressure drop and grade efficiency increase, as flow rate increase and then also pressure drop and grade efficiency increase.

• Journal of the East Asian Society of Dietary Life
• /
• 제17권5호
• /
• pp.727-737
• /
• 2007

The aims of this study was to suggest a new efficiency measurement indicator for evaluating the management efficiency of decision making units(DMUs) in the contract foodservice industry. The data envelopment analysis(DEA) model which considers multiple inputs and outputs and looking for benchmarks, was used to compare the productivity of DMUs. We considered sales, profits, and customer satisfaction as output variables and it adopted food cost, labor cost and administrative expense as input variables. The results of applying DEA revealed relatively efficient types of business and service types. The efficiency of school units was highest and the mired service type was the most efficient one. In this study the CCR model efficiency was analysed with profit and the customer satisfaction index by the matrix method. DEA efficiency was correlated with profit but there was no correlation between DEA efficiency and the customer satisfaction index.

• Korean Journal of Organic Agriculture
• /
• 제23권4호
• /
• pp.615-641
• /
• 2015

This study analyzes an economic efficiencies of apples, pears, and grapes farming. We evaluate an annual economic overall efficiency (OE), allocative efficiency (AE), technology efficiency (TE), pure technology efficiency (PTE), and scale efficiency (SE) using data envelopment analysis (DEA). We also measure returns to scale of farms, and the change of technical efficiency of frontier farms. Lastly we estimate the effects of some explanatory variables on allocative, pure technical, and scale efficiencies.