• 제목/요약/키워드: EDT (Early Decay Time)

검색결과 7건 처리시간 0.021초

MINT법을 이용한 실내 잔향곡선의 초기감쇠시간 단축에 관한 연구 (A Study on the to Shorten of Early Decay Time in the Reverberation Curve Using MINT)

  • 차경환
    • 한국음향학회지
    • /
    • 제21권1호
    • /
    • pp.37-41
    • /
    • 2002
  • 본 논문에서는 실내 잔향곡선의 초기감쇠시간을 복수 채널을 사용하여 단축시켰다. 실내에서 수음된 음성신호는 MINT(Multiple - input / output INverse Theorem)에 기초하여 풀밴드와 서브밴드로 역필터링하였으며, 복수 채널의 적응필터는 LMS(least Mean Square)와 NLMS(Normalized Least Mean Square) 알고리즘을 사용하였다. 실험결과 잔향곡선에서 -20 dB까지 감소하는데 걸리는 시간이 2개의 마이크로폰을 사용하였을 때 풀밴드 NLMS에서 약 1/3로 단축됨을 확인하였다. 실제 음장의 전달함수를 사용한 주관평가에서는 80%의 청취자가 MINT에 의해 초기감쇠시간이 단축된 음성의 명료도가 향상되었다고 평가하였다.

개구부로 연결된 3중 커플룸의 음향특성 (Acoustic Properties of Three-room Coupled System by Connected Two Apertures)

  • 나혜중;임병덕
    • 한국소음진동공학회논문집
    • /
    • 제26권3호
    • /
    • pp.340-349
    • /
    • 2016
  • A coupled room system consists of adjacent rooms and apertures where the sound energy is exchanged between the two rooms. Acoustically, a coupled room system shows a non-exponential decay profile. Most of the related researches have been to analyze the acoustic properties of two-room coupled system so far whereas three-room coupled system were seldom studied. In this regard, this paper aims to analyse the distribution of sound pressure level, sound decay curve of three-room coupled system and sound energy flow between them by using the acoustic diffusion model and to further verify them through experiments. Firstly, the sound pressure level distribution and mean sound pressure level in the steady-state condition are analyzed at various frequencies and source locations. Good agreements are observed in both experiments and analysis results. Secondly, two double slope effect quantifiers of sound attenuation, LDT/EDT and LDT/T10 are compared at various frequencies and for different source locations. The result indicates that LDT/T10, less affected by the early reflection patterns than LDT/EDT, is more suitable to the analysis and experiments of a multi-slope sound decay curve. Lastly, the sound energy flow in each room is analyzed based on the acoustic diffusion model. After the early decay stage, the sound energy is observed to flow from the room with a long reverberation time to the room with a short one.

방송용 다목적 홀에서 배너 가변에 따른 음향 환경 변화 (Effects of changes in banner size on acoustic environments in multipurpose halls for broadcasting)

  • 박호철;서로사;서춘기;전진용
    • 한국음향학회지
    • /
    • 제38권5호
    • /
    • pp.558-567
    • /
    • 2019
  • 스피치, 국악, 뮤지컬, 대중음악과 콘서트까지 다양한 장르의 공연이 이루어지는 방송용 다목적 홀의 경우 공연에 필요한 전기, 건축 음향적 요구 조건이 다양하다. 하지만 실제 음향 환경 가변을 위한 효율적인 운용 방법은 많지 않다. 본 연구는 무대 반사판의 설치 유 무와 전기 음향 사용 조건하에서 배너의 가변에 따른 홀의 음향 환경 변화를 살펴보았다. 그 결과 벽체 면적의 15 %에 해당하는 배너를 설치한 실제 측정에서 잔향 시간(Reverberation Time, $T_{30}$)은 최대 0.12 s, 초기감쇠시간(Early Decay Time, EDT)은 0.15 s, 음악 명료도(Clarity, $C_{80}$)는 0.76 dB, 음성 명료도(Definition, $D_{50}$)는 6.43 % 변하였다. 배너의 면적을 확장시킨 컴퓨터 시뮬레이션을 통해 전체 벽체 면적의 40 %에 해당하는 배너를 설치할 경우 잔향 시간은 0.11 s에서 최대 0.55 s까지 가변되는 것을 확인했다.

1/10 축소모형을 이용한 소공연장의 흡음재와 확산체의 적용위치에 따른 음향성능 비교 (Comparison of Acoustic Performance Depending on the Location of Sound Absorptive and Diffuser in Small Auditoriums Using 1/10 Scale Models)

  • 김태희;박찬재;박지훈;한찬훈
    • 한국음향학회지
    • /
    • 제34권2호
    • /
    • pp.146-156
    • /
    • 2015
  • 본 연구는 흡음재와 확산체의 적용위치가 소공연장의 음향성능에 미치는 영향에 대하여 알아보았다. 서울의 대학로의 2000년 이후 개관한 36곳의 공연장의 평균크기로 소공연장의 표준모델을 설정하여 연구를 진행하였다. 본 연구에서는 마감재 적용유효면적이 가장 작은 뒷벽을 기준으로 마감재의 적용면적을 산출하고, 마감재의 적용위치별 음향성능 변화를 분석하기 위하여 천장, 측벽의 적용위치를 전반부, 중반부, 후반부로 구분하여 총 8가지의 경우를 만들어, 1/10 축소모형실험을 진행하였다. 사용된 음향지표는 잔향시간(Reverberation Time, RT), 초기감쇠시간(Early Decay Time, EDT), 음악명료도(Clarity, C80), 음성명료도(Definition, D50), 음성전달지수(Speech Transmission Index, STI)를 이용하였다. 실험결과 마감재의 적용위치 변화는 소리의 울림에 양과 관련된 음향인자인 잔향시간, 초기감쇠시간 은 최소 변화 감지폭에 의한 (Just Noticeable Difference, JND) 평가시 변화가 뚜렷하게 나타났고, 소리의 명료도와 관련된 인자인 음악명료도, 음성명료도, 음성전달지수는 변화가 거의 없는 것으로 나타났다. 짧은 잔향시간을 얻고자 하는 경우 흡음재와 확산체 적용시 모두 측벽부분을 통한 잔향시간 조절이 가장 효과적이며, 측벽 전반부가 가장 짧은 잔향시간을 얻을 수 있는 위치인 것으로 나타났다.

1:25 축소모형 홀에서 확산체의 설치부위에 따른 실내 음향지표의 변화 (Effect of Diffuser Locations on the Room Acoustical Parameters in 1:25 Scale Model Hall)

  • 김용희;서춘기;이혜미;전진용
    • 한국음향학회지
    • /
    • 제31권3호
    • /
    • pp.115-128
    • /
    • 2012
  • 본 연구는 확산체의 확산계수 측정결과를 바탕으로 확산체의 설치가 홀 내부 음장분포에 미치는 영향에 대하여 알아보았다. 오케스트라쉘이 설치된 600석 규모의 축소모형 홀을 측정대상으로 이용하였다. 잔향실법 흡음률 측정을 통해 1: 25 축소모형의 벽체와 객석부 재료 (관객 및 의자)가 선정되었고, 만석 시 잔향시간을 기준으로 컴퓨터 시뮬레이션과 대응되도록 제작하였다. 다양한 확산체 부착위치에 따른 물리적 음장의 변화를 측정하기 위해 반구 확산체를 측벽, 발코니전면, 천장 등 부위별로 7가지 조합을 만들어, 확산체 유/무에 따른 음향지표의 변화를 측정하였다. 사용된 음향지표는 잔향시간 (RT), 초기감쇠시간 (EDT), 명료도 (C80), 중심시간 (Ts), 음압레벨 (G)과 더불어 임펄스리스펀스의 자기상관함수 (ACF)로부터 도출되는 Temporal diffusion (TD)을 이용하였다. 실험결과, 확산체 설치에 따라 흠음력과 확산면적이 증가하였고, 이에 따라 평균 RT, 평균 EDT, 평균 G는 감소하는 경향을 보였다. 또한 확산체 설치로 인해 초기반사음의 방향전환이 활발하게 발생했고, 평균 TD은 측정 케이스에 따라 6.05에서 6.30의 값을 보였다. 확산체 설치에 가장 민감한 지표는 RT (R = 0.94)로 나타났고, TD와 EDT의 상관관계 (R = 0.73)가 높은 것으로 나타났다. 확산체 설치부위의 영향은 각 음향지표의 변화양상을 통해 논의되었다.

잔향 시간 분석의 정확도 (The accuracy of analyzing reverberation time)

  • 강성훈;정한교
    • 한국음향학회지
    • /
    • 제37권5호
    • /
    • pp.349-355
    • /
    • 2018
  • 실내의 음향 특성을 기술하고 평가하기 위한 많은 파라미터들이 있다. 잔향 시간은 콘서트 홀, 극장, 스튜디오 등에서 중요한 특성이다. 오랫동안 잔향 시간을 계측하는 많은 방법들이 개발되어 왔고, 가장 일반적인 것은 단속적인 잡음 방법, 임펄스 응답 적분 방식, 임펄스성 음원에 대한 실내 응답 녹음 방법들이 있다. 그러나 잔향 시간은 측정 방법과 사용하는 음원과 마이크로폰에 따라서 달라지므로 정확한 잔향 시간을 구하기 어렵다. 본 논문에서는 잔향 시간의 해석 방법을 분석하고, 한계점에 대해서 검토한다.

음향 반사판의 밀도별 흡음특성 및 무대음향에의 영향 (Effect of Acoustic Reflector's Surface Density on Sound Absorption Characteristics and Stage Acoustics)

  • 김영선;정정호;전진용;김명석
    • 한국소음진동공학회논문집
    • /
    • 제22권5호
    • /
    • pp.429-436
    • /
    • 2012
  • In concert halls and auditoriums, acoustic reflector and stage enclosure is one of the main factors on the room and stage acoustic characteristics. As a stage enclosure and acoustic reflector honey comb based light-weight reflector is widely used, because it is easy to install. However, there was not enough research on the surface density effect on room and stage acoustics. In this study, sound absorption coefficient tests on three kinds of wooden acoustic reflectors with different surface density were conducted. Surface density of acoustic reflector was changed from 11 kg/$m^2$ to 41 kg/$m^2$. For the low frequency excitation, sub-woofer was used with omnidirectional loud-speaker simultaneously. From the experiments, it was found that sound absorption coefficient below 250 Hz band was decrease by the increment of surface density. In order to check the influence of the surface density on room and stage acoustic parameters, room acoustic simulation was conducted with sound absorption coefficients, which were tested in reverberation chamber. By the increment of surface density of acoustic reflector, RT(reverberation time) and EDT(early decay time) were increased. Also, ST(stage support) was improved in low frequency bands.