• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.556-561
• /
• 2014

본 연구에서는 유조선 공법의 유체역학적 타당성을 검증하고자 한다. EDISON_CFD를 이용하여 간단화한 서산 간월호의 간척 이전 모습을 모델링하였다. 방조제 모델에서의 난류 유동을 방조제 사이에서의 유속과 사이에서 받는 압력의 분포를 통해 유조선 공법이 실제로 방조제 건설에 도움이 될 수 있는지에 대해 평가했다.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.115-125
• /
• 2016

Recently, many attentions have been paid to conducting convergence research across diverse disciplines. Along with this convergence era, an IT-based multi-disciplinary convergence project, called EDISON (EDucation-research Integrated Simulation On the Net), has been launched to support the studies of researchers engaged in several computational science and engineering (CSE) fields and to boost learning motivations of CSE students. Since 2011, we have been successfully carrying out the EDISON project. EDISON as a cyber-learning platform enables CSE researchers to share their own high-performance computing (HPC) simulation softwares developed to solve their research problems accompanying large-scale computation and I/O and users to run the softwares with little constraints on the web. Also, the EDISON platform has been utilized as lecture material by many universities in Korea. This article introduces the construction and service statistics of this EDISON platform. Specifically, we explicate several distinctions between EDISON and existing other HPC service platforms and discuss a three-layered technical architecture of the EDISON platform. We then present the up-to-date service statistics of EDISON over the past four years. Finally, we conclude this article and describe future plans.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.31-39
• /
• 2017

The open source software is widely used nowadays so that means developing software without using open source software can hardly imagine. However, the developer's recognition about the license statements that defines the requirements in accordance with the use of open source is relatively low and a few study is associated with this topic. Therefore, this study examines the use of open source in software development in the context of EDISON project in the national research and development project. Furthermore, the study attempts to suggest the advanced model from simply avoiding license conflicts to constructing the open source project ecosystem including the choose of representative open source, the development of open source communities and contributor agreements.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.85-93
• /
• 2019

Computational Science and Engineering is a convergence study that understands and solves complex problems such as science, engineering, and social phenomena through modeling using computing resources. Computational science and engineering combines algorithms, computational and informatics, and infrastructure. The importance of computational science is increasing with the improvement of computer performance and the development of large data processing technology. In Korea, Korea Institute of Science and Technology Information (KISTI) has been developing national computational science engineering software and utilization technology by combining basic science and computing technology through EDISON project. The EDISON project builds an open EDISON platform and integrates and services information systems in seven areas of computational science and engineering (computational thermal fluids, nanophysics, computational chemistry, structural dynamics, computational design, and computational medicine). Using this, we have established a web-based curriculum to lay the groundwork for fostering scientific talent and commercializing computational science and engineering software. The purpose of this study is to derive the quality characteristic factors of computational science platform and to empirically examine the effect on user satisfaction. This paper examines how the quality characteristics of information systems, the computational science engineering platform, affect the user satisfaction by modifying the research questions according to the propensity of the computational science platform by referring to the success factors of DeLone and McLean's information system. Based on the results of this study, we will suggest strategic implications for platform improvement by searching the priority of quality characteristics of computational science platform.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.534-538
• /
• 2017

There are three types of robots that move on the ground classified as drivetrain. Wheels, tracks and Legs. Wheels and tracks are much easier to construct and control, but they have problems passing through obstacles like people. This paper discusses the design of line tracing using Theo Jansen, one of multi-legged walking mechanism. In order to increase the moving speed, the Jansen mechanism is designed by maximizing the objective variable as GL (Ground Length), GAC (Ground Angle Coefficient). In this project, only three sensors were attached and Arduino was used for optimal control of the motor using the sensor values.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.285-291
• /
• 2015

In this paper, a composite material analysis program based on the finite element method(FEM) is used. The purpose of this study was to verify whether the composite material analysis program which developed as part of a project of development of softwares and educational contents for structural vibration and composite material analysis that can calculate how similar the macroscopic mechanical behavior of the composite materials actually. Because composite materials are generally anisotropic, analysis of composite laminate is used for the constitutive equations of orthotropic material. For convenience, the unit is ommited in all calculations. To verify the accuracy of the finite element method based program, the deflection and stress distribution of the simply supported composite material laminated plate subjected to a uniform load distribution is compared with exact solution. Size and properties of the composite material laminate used for analysis are fixed variables, and by changing the number of elements and the total thickness of the laminate is compared with the exact solution to the resulting value, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.8
• /
• pp.47-53
• /
• 2017

In this paper, we present open hardware platforms for Internet of Things (IoTs) emphasizing their strengths and weaknesses. We introduce six representative platforms, Raspberry PI, Arduino, Garileo, Edison, Beagle board and Artik. We define important performance issues for open hardware platforms for IoTs and analyze recent platforms according to the performance issues. We present recent research project using open hardware platforms introduced in this paper. We believe that this paper provide wise view and necessary information for open hardware platforms for Internet of Things (IoT).

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.