• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.52-61
• /
• 1997

This study was aimed to decrease AOX(Adsorbed Organic Halide Compounds) by applying bleaching methods of A(HNO$_3$ ＋ NaNO$_2$) and $D^{(H/L)}$(dual pH chlorine dioxide bleaching) to conventional OCEDED bleaching stages. And so we investigate the effects of NSA treatment and the influence of production rate of ion species in chlorine dioxide and pulp mixtures according to various pH as well as dual pH on pulp bleaching. Finally the effects of AOC_DED^{(H/L)}ED^{(H/L)}$ bleaching stage were investigated by measuring AOX, brightness, kappa number and viscosity of pulps. A stage was treated by using 4% $HNO_3$ and 0.05~2.0% $NaNO_2$ on pulp and $D^{(H/L)}$ stage was like that pulp mixed with chlorine dioxide solution was adjusted at pH 7.0 and reacted in pulp cosistency 3%, S~20min, $70^{\circ}C$, and then successively for 160~175min at pH 4.0. It was found that suitable $NaNO_2$ addition rate was at 0.6% where the brigtness of pulp was most higher and pulp viscosity was not decreased much. Chlorate ($CIO_3$) was decreased according to pH increase but chlorite($CIO_2$) was highly decreased according to pH increase. And chloride was slightly increased with pH increase. The applying of A and D^{(H/L)}$ bleaching stages to some various multiple bleaching stages ($AOC_DED^{(H/L)}/EopD^{(H/L)} etc.$) had good results that brightness was increased more 2~3% ISO than conventional method(OCEDEopD), but viscosity was dropped by only 1~2cps.

• Korean Journal of Ichthyology
• /
• v.28 no.3
• /
• pp.200-206
• /
• 2016

The 7-week feeding experiment was conducted to investigate the effects of one experimental diet (ED) and five different commercial diets (CDs) on growth and body composition of juvenile olive flounder, Paralichthys olivaceus. An ED was formulated to contain 50.0% crude protein (CP) from fishmeal, casein, zein and wheat flour and 15.0% crude lipid (CL) from squid liver oil. Five CDs for seawater fish were two domestic E commercial diet (DECD) and C commercial diet (DCCD), three imported H commercial diet (IHCD), M commercial diet (IMCD) and O commercial diet (IOCD) containing 53.1~58.0% CP and 4.8~12.7% CL, respectively. Each diet was fed to triplicate groups of juvenile olive flounder initially weighing $29.1{\pm}0.8g/fish\;(mean{\pm}SD)$ in a flow-through seawater system with a water temperature of $23.4{\sim}28.0^{\circ}C$. Weight gain (WG) was significantly greatest in fish fed the IMCD; intermediate responses were observed for fish fed the DECD, DCCD, and IOCD, while the IHCD and the ED produced the lowest WG values. Feed efficiencies (FE) were similar to WG excluding fish fed the DCCD; FE was also greatest in fish fed the DCCD. Survival with no significant difference approached 100% for fish fed the all six diets in this experiment. Whole-body crude protein and ash contents were not affected excluding moisture and crude lipid by the different type of diets. Therefore, type of diets appeared to be important factor in influencing WG, FE and whole-body moisture and crude lipid of juvenile olive flounder; the best diet for juvenile olive flounder was determined to be the imported commercial M diets containing intermediate protein (55.9%) and lipid (12.7%) in natural seawater based on highest WG, and FE, respectively. This study indicates that the one commercially formulated diet containing intermediate protein and lipid used in this experiment could be a practical diet for juvenile olive flounder; these differences in growth performance between ED and CDs may be due to different dietary protein and lipid levels.

• Journal of Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.146-150
• /
• 1999

As a part of the integrated disease system in greenhouse, an antifungal fungus(AF1) was isolated from greenhouse soil. It exhibited strong inhibitory activites against Pythium ultimum, Phytophtora capsici, Rhizoctonia solani, Botrytis cinerea, and Fusarium oxysporum based on dual culture on 1/5 strength of potato dextrose agar between antagonistic fungus and several plant pathogens. The antagonistic fungus was identified as Chaetomium cochliodes, based on morphological characteristics; the body of the perithecium bears straight or slightly wavy, unbranched hairs, whilst the apex bears a group of spirally coiled hairs. To investigate antagonistic principles, antifungal compound was extracted and fractionated by different solvent systems. An antifungal compound was isolated as pure crystal from is culture filtrate using organic solvent extraction and column chromatography, followed by preparative thin layer chromatography. The chemical structure of the purified antifungal compound was identified as chaetoglobosin A based on the data obtained form $^1H-NMR$, $^{13}C-NMR$, DEPT 90, 135, $^1H-^1H$ COSY, $^1H-^{13}C$ COSY and EI/MS. $ED_{50}$ values of the chaetoglobosin A against P. ultimum, P. capsici, R. solani, B. cinerea and F. oxysporum were 1.98, 4.01, 4.16, 2.67 and 35.14 ppm, respectively.

• Journal of Environmental Science International
• /
• v.7 no.2
• /
• pp.141-148
• /
• 1998

Effects of alumlnlum(AA), soil pH and calcium(Cal on growth response and heavy metal accumulation and regulation of nitrogen fixation In Melilotus suaveolens seedlings, a biennial legume plant dominating in the disturbed area, were quantitatively analyzed during the growing periods. Accumulation of metals In each organ of M. suaveojens was Increased UC the lowering of pH. Al contents In leaf and root treat- ed with 30ppm Al at pH 4.2 on the 28th day after treatment were 8 and 11 folds higher than those of control, while the contents with 100ppm AA were 21 and 24 folds as compared to control. The significent inhibition in Al contents was induced by 100ppm AA and Ca at pH 6.5. Increased metals inhibited higher at pH 4.2 and the growth inhibition due to Al was reversed by the addition of Ca, suggesting that growth correlates to the pH value. Chlorophyll contents in leaves increased during growth stave were inhibited by Al treatments. The biomass was decreased UD the lowering of pH and the increase of concentrations. 100ppm Ca treatment resulted in 5.1-5.9% increase of the biomass as compared to that of 100ppm Al. Specific nitrogen fuation activities In nodules In the 100ppm Al at pH 4.2 and pH 6.5 were reduced to 35. 2% and 52.2% of control, on the 28th day after treatment, while the combination of Al and Ca induced reduced by 10% as compared to control with the treatment of 100ppm AA at pH 4.2 due to the inhibition bination of 100ppm Al and Ca and lowering of pH.

• Parasites, Hosts and Diseases
• /
• v.61 no.3
• /
• pp.282-291
• /
• 2023

Despite the recent progress in public health measures, malaria remains a troublesome disease that needs to be eradicated. It is essential to develop new antimalarial medications that are reliable and secure. This report evaluated the pharmacokinetics and antimalarial activity of 1,2,6,7-tetraoxaspiro[7.11]nonadecane (N-89) using the rodent malaria parasite Plasmodium berghei in vivo. After a single oral dose (75 mg /kg) of N-89, its pharmacokinetic parameters were measured, and t_1/2 was 0.97 h, T_max was 0.75 h, and bioavailability was 7.01%. A plasma concentration of 8.1 ng/ml of N-89 was maintained for 8 h but could not be detected at 10 h. The dose inhibiting 50% of parasite growth (ED₅₀) and ED₉₀ values of oral N-89 obtained following a 4-day suppressive test were 20 and 40 mg/kg, respectively. Based on the plasma concentration of N-89, we evaluated the antimalarial activity and cure effects of oral N-89 at a dose of 75 mg/kg 3 times daily for 3 consecutive days in mice harboring more than 0.5% parasitemia. In all the N-89-treated groups, the parasites were eliminated on day 5 post-treatment, and all mice recovered without a parasite recurrence for 30 days. Additionally, administering oral N-89 at a low dose of 50 mg/kg was sufficient to cure mice from day 6 without parasite recurrence. This work was the first to investigate the pharmacokinetic characteristics and antimalarial activity of N-89 as an oral drug. In the future, the following steps should be focused on developing N-89 for malaria treatments; its administration schedule and metabolic pathways should be investigated.

• Archives of Pharmacal Research
• /
• v.14 no.2
• /
• pp.181-187
• /
• 1991

The muscarinic antagonist 1-[benzilic 4, 4'-$[^3H]$ QUINUCLIDINYL BENZILATE $([^3H]$ QNB) bound to a single class of muscarinic receptors with high affinity in rabbit ileal membranes. The $K_D\;and\;B_{ max}$ values for $([^3H]$ QNB calculated from analysis of saturation isotherms were 52.5 pM AND 154 fmol/mg, respectively. Chlopheniramine (CHP), histamine $H_1$ blocker, increased $K_D$ vlue for $([^3H]$QNB without affecting the binding site concentrations and Hill coefficient. The $K_i$ value of CHP for inhibition of $([^3H]$QNB binding in ileal membranes was 1.44\mu{M}$ and the pseudo-Hill coefficient for CHP was close to unit. In the functional assay carbachol, muscarinic agonist, increased the contractile force of ileum with $ED_{50}$ value of $0.11\mu{M}$. CHP caused the rightward shift of the dose-response curve to carbachol. The $pA_2$ value of CHP determined from Schild analysis of carbacholinduced contraction was 5.77 and the slope was unity indicating competitive antagonism with carbachol. The dissociation constant $(K_i)$ of CHP obtained in competitive experiments with $([^3H]$ QNB was similar to the $K_A$ value (1.69 \mu{M)}$ of CHP as inhibitor of carbachol induced contraction in rabbit ileum. This result suggest that the binding of $H_i$ blocker. CHP, vs $([^3H]$QNB to muscarinic receptors in ileal membranes represents an interaction with a receptor of physiological relevance.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.272-278
• /
• 1998

This study was carried out to investigate the functional properties such as nitrogen solubility, emulsifying property , foaming capapcity , water and oil absorption of Camellia (Camellia japonica .) seed protein isolate in condition of distilled water and 0.5M NaCl solution at pH 2.0∼10.0. Nitrogen solubility of Camellia protein isolate in distilled water showed the minimum value at pH 4.0 and increased at pH lower or higher than the isoelectric point(pH 4.0). It was 90.0 %at pH 10.0 Nitrogen solubility of 0.5M NaCl solution showed a similar pattern with that of distrille dwater but was higher than that of distilled water except pH 2.0 and pH 10.0. Emulsifying activity of Camellia seed protein islate showed the minimum value at pH 4.0, but was higher at ether value of pH. Emulsifying stability of protein isolate was stable by heat treatment for 30min, at 80℃ and increased in 0.5M NaCl solution more than that of distille dwater. Foaming capacity of Camellia seed protein isolate in distill3ed water showed the minimum value near the isoelectric point, While it changed little at other values of pH. Foaming stability slowly decreased as, but didn't make a significant difference as time was delayed . Oil absorption was 1.4ml per a sample of 1g and water absorption was 0.9ml per a sample of 1g. The former was higher than the latter . The content of total amino acid of Camellia protein isolate was 43.67% and the major total amino acid of Camellia protein isolate was 43.67% and the major total amino acid was in the order of glutamic acid , arginine, aspartic acid, and leucine.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.1-6
• /
• 1997

An analysis method for the electromagnetic scattering of a tE polarized plane wave from a periodic strip grating over a grounded dielectric slab is consisered from the viewpoint of reflectio ngraing problem. The strip gratings showing bragg and off-bragg balzing phenomena at the frequency of 10GHz are designed, respectively. The strip grating structure is implemented using aluminum plate (hround conductor), paraffin(dielectric material ; .xi.$_{\gamma}$=2.24) and copper (strip conductor ; 0.08mm thickness). The experimental results (reflection power) for bragg as well as off-bragg blazing phenomenon have been compared with the theoretical results and fairly good agreements between theory and experiment have been observed.ed.

• The International Journal of Costume Culture
• /
• v.7 no.1
• /
• pp.40-47
• /
• 2004

The purpose of this research was to examine the degradation rate of alizarin in accelerated degradation conditions using the GC-MS quantitative analysis. Alizarin dye solution (2.5 x 10/sup -3/ M conc.) were kept in 150℃ oven for total of 7 days and the degradation rate was examined each day. 2.5 × 10/sup -4/M conc. alizarin dye solution was mixed with H₂O₂ according to [H₂O₂]/[dye] ratio 40 and were kept under 365㎚ UV for 2 hours, analyzed after 0, 30, 60, 90, 120min using the GC-MS. Gas chromatogram showed alizarin peak at 9.96 - 10.13 min. retention time range and residual peaks in the wide range from 9.6 to 11.1 min. Oven degradation exhibited an initial decrease in the amount of alizarin, which was followed by increasing amount in 4/sup th/ day. The decrease in the alizarin was significantly shown by the 7/sup th/ day. Same pattern was also observed in the H₂O₂/UV/O₂ degradation samples and was verified ed by the UV-VIS spectra. The differences in the amount of alizarin between 1/sup st/ day and 4/sup th/ day samples, 4/sup th/ day and 7/sup th/ day samples, and Control and 7/sup th/ day samples of the oven degradation were significant at alpha .20.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.513-516
• /
• 2008

We have replicated nanopillar arrays using injection molding process of active heating and cooling method by several peltier devices. The injection melding has a high accuracy ed good reproducibility that are essential for mass production at low cost. Conventional molding processes widely use the water-based mold heating and air cooling methods. However, in case of replication for nano-patterned structures, it caused several defects such as air-flow mark, non-fill, sticking and tearing. In this study, periodic nano-scale patterns are replicated by using injection molding with Peltier devices. Porous nano-scale patterns, which have pore diameter range from 120nm to 150nm, were fabricated by using anodizing process. Periodic nano-pore structures ( $20mm\;{\times}\;20mm$) were used as a mold stamp of injection molding. Finally, PMMA with nanopillar arrays was obtained by injection molding process. By using the Peltier devices, the temperature of locally adiabatic molds can be dramatically controlled and the quality of the molded patterns can be slightly improved.