• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.1002-1005
• /
• 1998

Bismuth titanate thin films were prepared on {{{{ { SrTiO}_{3 } }}(100) and Si(100) substrates by dipping-pyrolysis pro-cess using metal naphthenates as starting materials. crystallinity and in-phase alignment of the films were analyzed by X-ray diffraction $\theta$-2$\theta$ scans and $\beta$ scans (pole-figures) respectively. Highly c-axis-oriented {{{{ { { {Bi }_{4 }Ti }_{3 }O }_{12 } }} thin films with smooth surfaces were obtained after heat treatment at 75$0^{\circ}C$ on {{{{ { SrTiO}_{3 } }}(100) sub-strate while the films grown of Si(100) exhibited polycrstalline characteristics. C-axis oriented film show-ed an epitaxial relationship with the {{{{ { SrTiO}_{3 } }} substrate.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.48-55
• /
• 1997

A useful method to detect tool breakage suing neural network of cutting force signal is porposed and implemented in a basic cutting process. Cutting signal is gathered by tool dynamometer and normalized as a preprocessing. The cutting force signal level is continually monitored and compared with the predefined level. The neural network has been trained normalized sample data of the normal operation and cata-strophic tool failure using backpropagation learning process. The develop[ed system is verified to be very effective in real-time usage with minor modification in conventional cutting processes.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.264-272
• /
• 1998

The effect of catalytic condition on the properties of SiO2 aerogels has been investigated and then the dri-ed aerogels were partially densified to induce mechanical strength by heat treatment in order to prepare Type-VI silica by Sol-Gel method. Aerogel made by 1-step base process had the highest skeletal density lowest shrinkage and the smallest particle size. But in case of using acid catalyst in both 1st and 2nd step had the lowest skeletal density highest shrinkage and the largest particle size The aerogel synthesized by 1-step base process was most transparent because of its homogeneous microstructure. During heat treatments cracks occurred below 200$^{\circ}C$ for aerogel with the skeletal density lower than 1.9 g/cm3 but the with the higher skeletal density did not cracked up to 800$^{\circ}C$ shrinkage and skeletal density increased as heating temperature increased due to condensation and viscous sintering mechanism.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2003년도 추계학술대회 및 정기총회
• /
• pp.148-151
• /
• 2003

Recently school food service operations are confronted with the wide spread pressures for accountability and the need to increase productivity. This paper is concerned with the make-or-buy decision framework for school food service systems considering the multi-attributes in the decision making. For the purpose of considering the multi-attributes analysis method in decision making for the school foodservice, we developed a make-or-buy decision framework using the multi-attribute analysis method, analytic hierarchy process, AHP method for school food service system. Finally, we developed a systematic and practical solution builder for a three-step decision support system in the view of 1) brainstorming for the idea generation, 2) analytic hierarchy process, AHP as a multi-attribute structure ed analysis method, and 3) aggregation logic model to integrate the results of reviewers. We developed web based program and applied it to a school foodservice problem.

• 한국멀티미디어학회논문지
• /
• 제6권4호
• /
• pp.736-745
• /
• 2003

Traditional slicing techniques make slices through dependence graphs. They also improve the accuracy of slices. However, traditional slicing techniques require many vertices and edges in order to express a data communication link because they are based on static slicing techniques. Therefore the graph becomes very complicated, and size of the slices is larger. We propose the representation of a dynamic object-oriented program dependence graph so as to process the slicing of object-oriented programs that is composed of related programs in order to process certain jobs. We also propose an efficient slicing algorithm using the relations of relative tables in order to compute dynamic slices of object-oriented programs. Consequently, the efficiency of the proposed efficient dynamic object-oriented program dependence graph technique is also compared with the dependence graph techniques discussed previously As a result, this is certifying that an efficient dynamic object-oriented program dependence graph is more efficient in comparison with the traditional object-oriented dependence graphs and dynamic object-oriented program dependence graph.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.87-108
• /
• 2014

Electrodeionization (EDI), which combines electrodialysis (ED) and conventional ion-exchange (IX), is a mature process which has been applied since more than twenty years on commercial use for the production of ultrapure water (UPW). Eliminating chemical regeneration is the main reason for its commercial success. The increase in acceptance of EDI technology has led to an installation of very large plant as the commercial state of the art that produces $1,500m^3/h$ of water for high pressure steam boiler. More recently, EDI system has found a number of new interesting applications in wastewater treatment, biotechnology industry, and other potential field. Along with further growth and wider applications, the development of stack construction and configuration are also become a concern. In this paper, the principle of EDI process is described and its recent developments, commercial scale, and various applications are pointed out.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.702-711
• /
• 1998

The characteristics of corrosion resistance for the surface of medium high carbon steels and low alloy steels utilizing as manufacturing the machinery structures and machining tools and treating by plasma/ion nitriding process have been studied in terms of electrochemical polarization behav-iors including corrosion potential(Ecorr) anodic polarization trends and polarization resistance(Rp) The seven base materials showed a clear passivation behavior for the polarization tests in the ASTM standard solution 1N ${H_2){SO_4}$ Although the treated surface by plasma nitriding for the seven test materials showed a significant increase in hardness the treatment gave a detri-mental effect in corrosion resistance. The various characteristics including corrosion potential polarization curves microstructures corrosion current polarization resistance among non-treat-ed nitriding and/or soft-nitriding treated specimens have been investigated and some of the mechanisms discussed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.101-102
• /
• 2012

Thermal Diffusion Process(TD Process)을 통하여 베어링강 소재인 SUJ2 표면에 Vanadium Carbide를 석출시켜 표면 물성에 관한 연구를 진항하였다. $900{\sim}950^{\circ}C$ 온도와 2~6H 공정시간에 따라 TD Process에 의한 코팅층의 변화를 Micro Vikers Hardness Tester와 광학현미경, SEM, EDS를 통하여 관찰하였다. 그 결과 공정시간 및 온도는 코팅층 성장과 비례한다는 것을 확인 할 수 있었고 SUJ2 표면에 성장된 코팅층은 높은 경도값을 갖는 VC, CrC 코팅층임을 확인하였다.

• 전자공학회논문지S
• /
• 제35S권4호
• /
• pp.30-39
• /
• 1998

Currently, LAMA(Local Automatic Message Accounting) is a billing mechanism which is being used for billing process, in which billing dat is written on MT(Magnetic Tape), collected at each regional billing center and then processed once a month. However, in order to prepare further development of telecommunication network and future new services, computerization of billing process and new daily billing processing system are urgently needed. Therefore Korea Telecom had developed a CAMA (Centralized Automatic Message Accounting) system for M10CN switch. In the CAMA system, billing data generated in switches is transfered on-line using approproate protocols and various transmission media and immediately processed. The CAMA system for M10CN switch consists of three parts such as ED (Extraction Device), TD(Transmission Device) and HC(Host Collector). The system also has redundancy to maintain continuance and confidence of system operation.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.63-70
• /
• 2001

This study is concerned with Finite Element Analysis on welded part of control link fur automobile. For analysis, control link was modeled into two parts, ring and rod. Heating condition, temperature distributions and fatigue fracture strength were analyzed using "HEAT III" and "NDURE" module of NISA II. Metal flow in the process of welding was simulat- ed by $DEFORM^{TM}2D$.The analyzed results were compared with experimental inspection. Quality of welded part was able to be improved by controlling metal flow in the process of welding by increase the friction constant of ring part. Heat transfer analysis and flow simulations were in good agreement wish welding experiments.