• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.279-282
• /
• 2002

In this paper, we present a new method for monitoring of ECU's self diagnostic signals of vehicle without wire. In order to measure the ECU's self diagnostic signals, the interfaced circuit is designed to communicate ECU and a designed display terminal according to the ISO, SAE regulation of communication protocol standard. A 80C196KC processor is used for communicating ECU's self diagnostic signals and the results are sent to PDA monitoring system. Software on PDA is developed to monitor the ECU's self diagnostic signals using the Embedded Visual C++ compiler in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self diagnostic signals are verified to monitor ECU's state. At the same time, the information to fix the vehicle's problem can be shown on the developed PDA software. The possibility for remote measurement of ECU self diagnostic signal using PDA is also verified through the developed systems and algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.640-646
• /
• 2017

A GEN TEST of the auxiliary power unit of a T-50 series aircraft is performed as part of the operational test of its emergency power system on the ground before flight. At this time, the auxiliary power unit should be automatically turned off via the response signal of the ECU when power is not normally supplied to the emergency power system. If the correct operation of the emergency power system cannot be confirmed on the ground, it is not possible to proceed with the flight. This kind of defect is a major factor causing the operation rate of the aircraft to be decreased. The defect code identified by the ECU was confirmed as a defect in the inverter. However, the same defect was found after replacing the inverter. This report presents an improved method of identifying the cause of the defect by analyzing the response characteristics of the ECU and emergency power system and allows the ECU to be recognized as the cause of the defect if the inverter does not generate a voltage within a certain time. Also, the application of the improved method confirmed that it can satisfy the output request time of the emergency power system and effectively prevent the auto-shutdown of the auxiliary power unit.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.68.2-68
• /
• 2002

The purpose of this paper is to monitor ECU's self-diagnostic signal without wire. In order to measure the ECU's self-diagnostic signal, the interfaced circuit is developed to communicate ECU with a designed display terminal according to the ISO, SAE regulation of communication protocol standard. An 80C196KC processor is used for communicating ECU's self-diagnostic signal and communication data are sent to PDA monitoring system that is based on the Windows CE. Software on PDA is developed to monitor the ECU's self-diagnostic signal in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self-diagnostic signals are verified to mo...

• Review of KIISC
• /
• v.33 no.4
• /
• pp.47-55
• /
• 2023

자동차 산업에서 전자제어장치 (Electronic Controller Unit, ECU)를 활용한 혁신으로 운전자들은 안전하고 편리한 운전경험을 누리고 있다. 그러나 이와 동시에, 차량 내부 ECU 간의 통신을 지원하는 CAN (Controller Area Network)을 대상으로 한 악의적인 침입과 사이버 공격의 위협 역시 증가하고 있다. 이러한 문제에 대응하기 위해 많은 연구가 진행 중이며, 특히 자동차 침입 탐지 시스템 (Intrusion Detection System, IDS)의 발전이 주목받고 있다. 그러나 대부분의 IDS는 주로 공격을 탐지하는 데 집중되어 있으며, 실제 악의적인 메시지를 전송한 ECU를 정확히 식별하는 데에는 한계점이 있다. 악의적인 ECU를 식별하는 기술은 공격 ECU를 격리시키거나 펌웨어 업데이트 등의 보안 패치를 적용하는데 필수적인 기술이다. 본 고에서는 현재까지 제안된 CAN에서의 악의적인 ECU를 식별하기 위한 기술들에 대해 살펴보고, 비교 분석 및 한계점에 대해 분석하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.23-29
• /
• 2007

In Korea, the number of LPG vehicles is increasing continuously because LPG is cheaper than Gasoline. Also in Europe, the CNG fuel is a good solution to meet $CO_2$ regulation. In order to use LPG/CNG fuel, new EMS ECU must be developed for every type of vehicles and it requires huge development cost. In order to reduce development cost and time, SIEMENS VDO has developed an Interface Box. It supports EMS ECU in the car and manages LPG/CNG fuel injection system. Basically the Interface box can be used with any kind of EMS ECU. The Interface Box controls LPG/CNG injector through the injection command of gasoline EMS ECU. It calculates required amount of based on the fuel temperature and pressure and sends feedback signal to ECU for fuel correction. Also, it controls LPG/CNG specific actuator such a Shut off valves and LPG switch inputs.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.172-177
• /
• 2021

The HUD (Head-up Display) device for vehicles has gradually been advanced in connection with ADAS (Advanced Driver Assistant System) for the safety and the convenience of driving. In this paper, the major features (e.g. speed, RPM, etc.) of vehicles is received through the ECU and the route information is received through the navigating API, configurating the integrated GUI. And, the optical system is configured based on DLP (Digital Light Processing) to evaluate the visibility depending on the resolution change of the GUI. The IoT HUD system proposed in this paper has the scalability to flexibly add not only the ECU but also various cloud-based driving-related information.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.319-325
• /
• 2004

The major factors that make ZEV affordable are the range and cost. The development of advanced batteries such as Ni-MH battery can solve the problem partly； on the hand the battery management system is an efficient way. Ni-MH battery and battery ECU is a key component influencing ZEV performance, such as range, acceleration and hill-climbing capability. Because most problems related to battery such as short circuit, over-discharge and overcharge occur easily during operation, it is necessary to develop a dedicated battery ECU for HEV. This paper proposes a new SOC algorithm for the HEV based on the terminal voltage and current integration. And battery ECU was designed and analyzed. Also, the validity is confirmed through experiment.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.242-245
• /
• 2017

기존의 엔진제어기(ECU)는 주요 mapping data(ECU에 대응되는 값)들에 대해서 기밀성과 무결성을 제공하는 보호 기법의 부재로 인해 임의적인 튜닝이 가능하다는 특징이 존재하였다. 이로 인해 자칫 잘못된 튜닝이나 악의적인 조작이 발생할 수 있는 여지가 있으며, 이는 차량 엔진 및 조작의 안정성을 떨어뜨림과 동시에 운전자 및 보행자들의 안전을 위협할 수 있다는 문제가 있다. 이에 본 논문에서는 ECU에 적용되는 Firmware의 주요 mapping data를 안전하게 암호화하는 방식을 제안하며, 이 과정에서는 차량의 식별 및 ECU에 mapping 되는 data의 무결성 검증을 위해 인증서를 사용하는 방식을 제안한다. 본 논문의 제안을 통해 주요 mapping data를 안전하게 보호하는 기술을 통해 차량의 안전성을 유지할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1714-1719
• /
• 2003

Antilock Brake System (ABS) is indispensable safety equipment for vehicles today. In order to develop new ABS ECU suitable for pneumatic brake system of a bus, a Hardware In-the-Loop Simulation (HILS) System was developed. In this HILS, the pneumatic brake system of a bus and antilock brake component were used as hardware. For the computer simulation, the 14-Degree of Freedom (DOF) bus dynamic model was constructed using the Matlab/Simulink software package. This model was compiled and downloaded in the simulation board, where the Power PC processor was used for real-time simulation. Additional commercial package, the ControlDesk was used to monitor the dynamic simulation results and physical signal values. This paper will focus on the procedure and results of evaluating the ECU in the HILS simulation. Two representative cases, wet basalt road and $split-{\mu}$ road, were used to simulate real road conditions. At each simulated road, the vehicle was driven and stopped under the help of the developed ECU. In each simulation, the dynamical behavior of the vehicle was monitored. After enough tests in the laboratory using HILS, the parameter-tuned ECU was equipped in a real bus, which was driven and stopped in the real test field in Korea. And finally, the experiment results of ABS equipped vehicle's dynamic behavior both in HILS test and in test fields were compared.