• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.261-265
• /
• 2005

This paper describes the DC-DC Converter for Ancillary Power Supply in Hybrid Electric Vehicle. DC-DC Converter is used for charging 12V auxiliary battery supplying electric power to head ramp, audio, ECU etc in automobiles. used DC-DC Converter Topology is PS-ZVS FB(Phase Shifted Zero Voltage Switching Full-Bridge) to reduce switching loss and EMI noise induced by high frequency operating condition. And For easy compensation and stable system response characteristic, current mode control method including slope compensation is employed. Constant current / constant voltage charging control method guarantee stable electric charging of auxiliary battery. Simulation toll PSIM6.0 is used for initial circuit parameter settings and H/W debuging. Thermal problems of Switching components in DC-DC Converter is improved by using Thermo Tracer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.644-654
• /
• 2001

In this paper, an electronic control unit of the automobile engine for optimal fuel injection an spark timing control has been designed and developed. This system includes hardware and software for a precise control of fuel injection and ignition timing. Especially, the crank angle sensor provides two separate signals: One is the position signal (POS) which indicates 180 degree pulses per revolution, and the other is the reference signal (REF) that represents each cylinder individually. Consequently, the developed engine control system has been able to control fuel injection and ignition timing more quickly and accurately. Through the experiment, it has been found that the fuel injection duration and the position of MBT have been influenced by coolant temperature, air flow rate and engine speed.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2380-2382
• /
• 2004

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead, HTTP(Hyper Text Transfer Protocol) web server, and the system with can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized. For sending the operation condition and change of vehicle the desired data is derived by interacting ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle value.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.178.2-178
• /
• 2001

Today, many electronic devices and ECUs (Electronic Control Units) are used in the automotive body control systems. It becomes more common that these devices exchange data with others through an in-vehicle network. Automobile manufacturers concentrate their efforts on development of body control systems based on networks in order to save cost and to increase flexibility and safety. OSEK/VDX has been founded as a joint project in German and French automotive industry aiming at an industry standard for an open-ended architecture for distributed control units in vehicles OSEK/VDX consists of Communication (specification of data exchange within and between control units), Network Management specification of Configuration determination and monitoring and Operating System (specification of realtime executive for ECU software ...

• Electronics and Telecommunications Trends
• /
• v.20 no.6 s.96
• /
• pp.24-35
• /
• 2005

지능형 순항 제어 시스템(Adaptive Cruise Control System)은 자동차가 정속을 기준으로 주행중 센서를 활용하여 감지하는 도로 상황에 대한 실시간 정보를 자동차의 전자제어부(ECU)로 연결하여 매 순간 안전상황을 확보하기 위한 조치를 자동으로 취한후 다시 정속 주행으로 복귀할 수 있도록 제어하는 차세대 첨단 자동차 주행용 안전 장치를 통칭하는 개념이다. 본 분석에서는 Global Industry Analysts의 보고 자료(2005.1.)를 바탕으로 시장 전망과 세계 업계의 개요를 소개하여 우리나라의 관련 기술에 대한 길잡이로 활용하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.155-163
• /
• 2000

A technology of full time four wheel drive(4WD) vehicle has been improved greatly, and the market share of full time 4WD has been extended steadily in recent days. The transfer case is an essential element in the 4WD automobile. In this paper, the details of electronically controlled transfer case is described. In order to achieve easy shifting, the shifting, the developed system automate the conversion of "$4\times2\longleftrightarrow4\times4(H)\longleftrightarrow4\times4(L)$". Furthmore, this system employs an chain drive type instead of gear drive type for drive type and synchromesh type instead of constant-mesh type for gear mesh type. Therefore, the developed transfer case is accomplished light-weight, low noise, and compact.d compact.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1039-1046
• /
• 2001

Among the automotive steering systems, an Electric Power Assisted steering (EPAS) system utilizes an electronically controlled electric motor to provide steering assistance to the driver. The key components of the EPAS system are torque sensor, ECU (Electronic Control Unit), and DC Motor. The most important component of the EPAS is the torque sensor. The conventional torque sensor has complicated mechanical mechanism of torque detection. However, we suggest a non-contact torque sensor for EPAS using Maluss polarization law. It was found that the sensor exhibited not only excellent linearity but also superior characteristics of hysteresis, temperature and vibration.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1309-1313
• /
• 2008

This paper suggests an example of modification of the durability test specifications of electronic control unit for an automotive system in phase of design validation. The basic concept to redefine the specifications of durability test is based on the Arrhenius relationship for accelerated temperature test and the modified Coffin-Manson model for temperature cycle test. The ambient temperature of the powered-event durability test is increased to reduce the required test time of the current specification. Furthermore, the holding time between the events to cool down the temperature of the components is shortened and the resultant temperature rise affects the durability of the components. Thus, the acceleration factor due to the increased temperature range of temperature cycle is also estimated by the modified Coffin-Manson model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.121-126
• /
• 2005

This paper describes the attributes, performance and development status of a high performance capacitive torque sensor intended for use in a electric power steering (EPS) system. The EPS system is composed of torque sensor, ECU, motor, gears and etc. Among the elements, torque sensor in the steering column is one of the core technologies. The new capacitive torque sensor in this paper is developed differently from working principle and mechanical structure compare to extant torque sensors in market and patent. Based on the result of numerical analysis, a experimental equipment is made which is composed of a test jig and a capacitive sensor and validity of numerical analysis and feasibility of the torque sensor are verified.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.964-967
• /
• 2012

자동차산업이 발달하면서 자동차 내에도 ECU 기반의 전자 장비가 증가하고 있다. 다양한 차량용 전자 장비의 소프트웨어의 호환성과 효율적인 구동을 위하여 독일 자몽동차 업체를 필두로 자동차 업계에서는 OSEK/VDX 운영체제를 기반으로 AUTOSAR 표준화를 제안하였다. 본 논문에서는 AUTOS AR 표준에서 기반으로 하고 있는 OSEK/VDX와 기존의 RTOS (실시간 운영제제)를 다양한 측면에서 비교 분석하여 향후 자동차 소프트웨어를 위한 운영제제의 발전방향과 각각의 운영제제의 특성과 장점을 분석 하였다.