• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.225-233
• /
• 1991

This study was conducted to evaluate the potential of indigenous vesicular-arbuscular mycorrhizal fungi(VAMF) in the rhizosphere soil of horticultural crops grown under greenhouse and open-field condition, in the southern area of Kores. Soil samples collected from the rhizosphere of some sellected horticultural crops, such as cucumber, hot pepper, lettuca, tomato and eggplant grown under greenhouse or open-field condition. All tested crops are considered as mycorrhizal plants. The infection rate of horticultural crops investigated ranged from 38% to 70%, hot pepper and eggplant grown under greenhouse condition showed the highest infection being 66.0% and 70.0%, respectively. Spore densities were from 4.8 to 20.0g-1 on dried soil basis. Spore densities of VAMF in the rhizosphere soils under greenhouse condition were higher than that of open-field conditions. The highest distribution of spores in diameter ranged from $75{\mu}m$ to $106{\mu}m$ in the rhizosphere soil of lettuce, cucumber and tomato while those in hot pepper and eggplant ranged from $75{\mu}m$ to $250{\mu}m$. Glomus sp.-type spores predominated in the slightly acid soil(pH 6.3), while Acaulospora sp.-type spores greatly predominated in the very strongly acid field(pH 4.9).

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.151-159
• /
• 1994

This study was conducted to investigate the $NO_3-N$ concentration, the relationship between $NO_3-N$ and other ions, and patterns of ions in ground water used as drinking water in Cheju Island. Samples were collected from 19 wells in the northwest region, near the district of poultry complex, and 9 wells in the northeast region. In the northwest region, $NO_3-N$ concentrations in D-14 and D-202 wells near the pig farming facilities were 10.95 and 13.1 mg/L, respectively, exceeding the standard concentration of drinking water. The concentration in D-65, D-35, and D-120 wells were slightly lower than the standard concentration. However, $NO_3-N$ concentrations in the wells in the northeast region were lower than 3mg/L. In wells in the northwest region, $NO_3-N$ concentrations were negatively correlated with pH and positively correlated with $Ca^{++}$, $Mg^{++}$, $Na^+$ $Cl^-$, $SO_4^{--}$, and $Cl^-/HCO_3^-$. However, in the northeast region, they were not related with pH and the ions. The chemical compositions in D-65, D-35, and D-41 wells showed higher concentrations of $Ca^{++}$, $Mg^{++}$, $Na^+$, $Cl^-$, $NO_3-N$ and $SO_4^{--}$ than the unpolluted D-42 well. These results suggest that ground water near the pig farming complex was polluted by pig farming waste in the northwest region.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.591-598
• /
• 2016

The purpose of this study was to screen desirable yeast strains for alcoholic fermentation of tomato paste without sugar addition. The moisture, crude protein, crude fat, ash, and soluble nitrogen contents of the tomato paste ($25^{\circ}Brix$) were found to be 67.33%, 1.90%, 0.03%, 0.02%, and 30.72%, respectively. Free sugars found in the paste were fructose and glucose. Most abundant free amino acids of the paste were glutamic, aspartic, and ${\gamma}$-aminobutyric acids. Total seven yeast strains (Saccharomyces cerevisiae KDH (TWA), S. cerevisiae Lalvin ICVD-47 (TWB), S. cerevisiae Lalvin RC-212 (TWC), S. cerevisiae Lalvin K1-V1116 (TWD), S. bayanus Lalvin EC-1118 (TWE), S. cerevisiae Enoferm (TWF), and S. cerevisiae DJ97(KCTC8842P) (TWG)) were tasted for alcohol fermentation of the tomato paste. The highest alcohol content (8.2%) and the lowest residual sugar content ($13.25^{\circ}Brix$) were observed in the tomato paste fermented using the S. cerevisiae Lalvin ICVD-47 strain (TWB) after 3 day and 4 day of fermentation, respectively. Sugar and reducing sugar contents, and pH of the tomato paste were not remarkably affected by the difference in yeast strains used, showing $13.25{\sim}13.45^{\circ}Brix$, 28.37~28.48 mg/mL, and 4.43~4.54, respectively, after 4 day of fermentation. Color and total acid content were significantly affected by the types of yeast strains and fermentation time, but the numerical changes were negligible. These results indicate that TWB would be the suitable strain for alcoholic fermentatiom of tomato paste based on its highest alcohol production and the lowest residual sugar content produced during fermentation.

• Korean Journal of Microbiology
• /
• v.39 no.2
• /
• pp.95-101
• /
• 2003

The total bacterial numbers, Eubacterial community structures and environmental factors which affect bacterial community were estimated monthly using DAPI and fluorescent in situ hybridization monthly, from June to November 2000 to evaluate the correlation between the bacterial community and environmental factors in eutrophic agricultural Masan reservoir in Asan. Average water temperatures varied from 12.3 to $27.5^{\circ}C$, pH 7.5 to 9.0, DO 7. I~12.8 mg/L, COD 6.4~13.0 mg/L, chlorophyll a 30.5~99.0 mg/㎥, SS 7.S~25.7 mg/L, TN 1.748~3.543 mg/L., and TP 0.104~0.581 mg/L, respectively. Total bacterial numbers showed high ranges from 0.4 to 9.6$\times$ $10^{6}$ cells/ml, and these indicated the mesotrophic or eutrophic state. The ratio of Eubacteria to total bacteria was 67.6-88.0%, which was higher than that in other reservoir. The relationships of total bacteria and Eubacteria community were more significant with organic nitrogen (Org-N), and organic phosphorus (Org-P) than with water temperature. Proteobacteria groups showed strongly significant relationships with Org-P and Org-N and significant relationships with water temperature, conductivity, COD, and inorganic nitrogen. C-F group was the most significant with Org-N, and HGC group with water temperature. However, relationships of Chl-a, pH, DO and SS showed no significance with any bacterial community. These results were different from other studies, because of the specific characteristics of Masan reservoir such as old, shallow and eutrophic states. The seasonal variation of bacterial community in Masan reservoir does not seem to depend on phytoplankton dynamics but on storm event and organic materials from watershed and the sediment of reservoir.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.164-172
• /
• 2010

This study reviews the influence of culture in interpersonal servicescapes by examining the restaurant retail setting. Two cultures (Canada and France) are surveyed in order to better understand their retail expectations towards interpersonal servicescapes. Using Hofstede's (1991) cultural dimensions to explain some of the differences between Canadian and French restaurant patrons, this study demonstrates a potentially interesting research avenue in the field of cross-cultural interpersonal services marketing. It demonstrates that cultural dimensions do not operate independently but interdependently. Understanding this can help retailers better explain complex service interactions between countries that may appear similar in terms of various socio-demographic features. In this exploratory research, a measure via exploratory factor analysis was developed, one that encompasses both the physical and service aspects common to interpersonal servicescape by using personality traits. This measure was tested in order to better understand the service expectations between two cultures, Canada and France. Five dimensional structures were uncovered in both cultures but with different traits and groupings. The differences between the traits uncovered and the overall Canadian and French personality structures find some explanation using Hofstede's (1991) cultural dimensions. The results of this survey point to a possible explanation as to why when services are transferred between cultures, the perceptions of them can be different and sometimes even lead to service failure. There are clearly some cultural differences between the Canadian and French consumers and their overall expectations regarding their consumption experience. Reviewing the first factor of the French and Canadian personality structures shows that the individualist/collectivist differences are apparent between the Canadian and the French cultures. The second dimension also has quite a few traits in common, five, all of which have the personal treatment aspect of the restaurant experience that a service provider would be responsible for: polite, respectful, and dedicated. Notable is that the French dimension does not include the authenticity or the hospitable aspect of the experience but includes even more features that are inherent to the personal interaction, such as charming and courteous. The third dimension of the Canadian and French structures reflects completely different expectations. Whereas the French dimension centers around energy and enthusiasm, the Canadian version is more laid-back and relaxed. There is extroversion in the French dimension to introversion in the Canadian dimension. This could be explained by differences on the Uncertainty Avoidance dimension as outlined by Hofstede (1991). The fourth dimension seems to confirm previously outlined cultural differences. Whereas Canadians, being a bit lower on uncertainty avoidance and power distance, prefer an intimate and private experience, the French continue to expect extraversion and inclusive features to their experience. The fifth dimension is in the French personality structure a clear expression of the high power distance society, where the roles of the players in the restaurant experience are clearly defined and the rules of engagement preserved. This study demonstrates that different cultures clearly do relate to different expectations regarding interpersonal services. This is apparent in the dimensions that come up in both the French and the Canadian personality structures, not only in terms of how different they are but also in with which cultural dimensions these can be explained. For interpersonal servicescapes, the use of personality traits is interesting as it allows for both physical and service features to be accounted for. Furthermore, the social component inherent to interpersonal servicescapes surfaces in most of the dimensions of the service personality structures. The quality of social exchanges is extremely important, and this even more so in cross-cultural situations, where the expec tations regarding the service experience may vary. As demonstrated by this research and using Hofstede's (1991) paradigm, not all societies will have the same expectations pertaining to the interpersonal services. Furthermore, the traditions surrounding the type of service can also have an impact on the service evaluations and differ between countries and cultures. However, using personality traits may also allow for retailers to see which service traits are common to two or more cultures where they seek to be present, and focus on these in the offering. The findings demonstrate the importance of the individualist and collectivist dimension for interpersonal servicescapes. This difference between the French and the Canadian personality structure is apparent in the most dominant dimension as well as within others. The findings are a step in explaining how retailers can transfer and then measure interpersonal services across cultures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.333-341
• /
• 2020

This study aimed at comparing the antioxidant activity of premature mandarin (PM) vinegars by varying harvest periods (July, August, and September) and raw material conditions (PM fruit, PMF; PM fruit with 10% dried Citri Unshius Pericarpium Immaturus (CUPI), PMF-D, and PM fruit with 10% roasted CUPI, PMF-R). We found that the PM harvested in July exhibited the highest phenol content. Meanwhile, the July and August harvests showed stronger DPPH radical scavenging and reducing power. The phenol content of PMF-R vinegar was 0.62±0.02 ㎍ GAE/mL, more than two times higher than that of PMF vinegar. The DPPH radical scavenging capacity and reducing power were the highest in the PMF-R vinegar, at 4.71±0.07 and 7.47±0.28 nL/mL, respectively. Therefore, it could be expected that PM vinegar prepared by adding roasted CUPI and harvested in July would exhibit high antioxidant activity and could be used as functional vinegar.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.68-76
• /
• 2008

This study examined the inhibition effects of a freshwater bivalve (Unio douglasiae) and a submerged plant (Potamogeton crispus) on the cyanobacterial bloom (Oscillatoria sp.). The experiment were conducted in aquarium $(50cm{\times}65cm{\times}120cm)$ with lake sediments in the bottom of the aquarium in 10 cm thick. Before the experiments, artificial cyanobacterial bloom was induced with the addition of lake sediment and CB medium. Total 12 transparent acrylic cylinders (${\Phi}19cm$, height 40 cm) were placed in the aquarium, and within which bivalves and plants were placed in various conditions such as the control (C), plant addition (P:5 stems), mussel addition (U:2 individuals), and both mussel and plant addition (PU: the same quantity as used in each treatment). The experiment was conducted in triplicate during 7 days. pH, dissolved oxygen (DO), electric conductivity (EC), salinity, cyanobacterial cell density, chlorophyll-${\alpha}$ concentration, and mussel filtering rate were monitored daily. At the end of the experiment, total phosphorus (TP), total nitrogen (TN), and plant height and weight were measured. Overall, a large degree of cyanobacterial growth inhibition appeared in both P and U treatments, and the effect was highest in the U treatment, followed by P and PU. The combined treatment of both U and P did not show any synergic effects compared to the effect in separated treatment. In all enclosures of the treatments chlorophyll-${alpha}$ (Chl-${alpha}$) concentration decreased until 36 hours after the additions of the plants and mussels. In contrast, Chl-${alpha}$ concentrations increased in PU enclosures after 36 hours. The same trend was shown in the cell density of Oscillatoria. pH and DO gradually decreased until 120 and 144 hours, respectively, in the P and PU enclosures. TP concentration increased in the mussel enclosures (U and PU), while TN concentration largely decreased in the plant enclosures (P and PU). Our results suggest that applied bivalve (Unio) and submerged plant (Potamogeton) seemed to have a potential effect on the growth inhibition of cyanobacteria, but their combined application may have an antagonistic effect to diminish the degree of the inhibition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.249-258
• /
• 2017

The purpose of this study was to investigate the effects of envrionmental factors on the ecological responses, yield, and quality properties and physicochemical characteristics of yacon cultivated in various regions of Korea. Experiments were carried out in eight regions from 2010 to 2013. The temperature range in Jinbu, Bonghwa, Cheolwon, and Gangneung during the growth period of yacon cultivation was $17.5-24.6^{\circ}C$. The total yield and marketable yield of tuberous root in Jinbu were 4,065 and 3,196 kg/10a, respectively. The sugar content of yacon tuberous roots comprised 0.11-0.20% fructose, 0.11-0.37% glucose, 0.39-0.68% sucrose, 0.07-0.37% reducing sugar, and 7.03-9.62% fructo-oligosaccharides. The content of fructo-oligosaccharides, which is a functional substance, was the highest in yacon cultivated in Jinbu. Based on the productivity and functional fructo-oligosaccharides, the optimum areas to cultivate yacon are Jinbu and Bonghwa, which are located in the middle-highland zone (500-560 m) and have a suitable growth temperature of $18-25^{\circ}C$. The results of the present study indicate that temperature could be the factor with the greatest influence on the root growth of yacon.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.64-73
• /
• 2008

The cDNA of CCF (coelomic cytolytic factor)-like gene (EC 3.2.1.16), a kind of glycosyl hydorlase, was isolated and cloned from the midgut of the earthworm Eisenia anderi. The size of nucleotide sequence appeared to be 1,152 bp and its predicted coding region was composed of 384 amino acid residues including the initiation methionine. The 17 residues at N-terminal end in the deduced amino acid sequence were regarded to be a signal peptide. Based on the amino acid sequence analysis, it appeared that this CCF-like protein could belong to glycosyl hydrolase family 16 (GHF16) and showed a high sequence homology of about 79~99% with CCF and CCF-like proteins from other earthworm species. The CCFs and CCF-like proteins from various earthworm species exhibited a 100% homology in the polysacchride-binding motif and glucanase motif. It has been reported that the CCFs isolated from E. fedita appeared to show a broader pattern recognition specificity than those from other earthworm species because this species resides in decaying organic matter showing very high microbial activity, implying that CCF-like protein isolated in this study from E. andrei might exhibit a broad substrate specificity that is a useful characteristic for industrial application. A phylogenetic analysis using the deduced amino acid sequences of CCF-related proteins through the BLASTX revealed that GHF16 families could be divided into three groups of metazoa, viriplantae and eubacteria subfamily. Subsequently the CCF-related proteins of metazoa subfamily could clearly be subgroup into lophotrochozoan and edysozoan type including a deuterostome origin. Further understanding of the biological properties of E. andrei CCF-like protein should be addressed to regulate the ${\beta}$-D-glucan hydrolysis and production for the industrial uses.