• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2017

Hydrolysis resistance and mechanical property changes of polyketone (POK)/glass fiber (GF) composites were investigated for GF concentrations varying between 30 and 50%. The hydrolysis resistance of GF filled POK and polyamide66 (PA66, hydrolysis resistant grade) composites were compared. As shown by the experimental results, increasing the immersion time of the composites in a monoethylene glycol (MEG)/water solution at $120^{\circ}C$ had no impact or resulted in slightly decreased mechanical properties such as the tensile strength, tensile modulus, and strain at break in case of POK composites, whereas the mechanical properties of PA66 composites showed a significant drop. Increasing GF concentrations increased the tensile strength, tensile modulus, flexural strength, and flexural modulus of POK composites; however, impact strength did not show significant changes. Hydrolysis mechanisms of POK and PA66 are discussed.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.279-285
• /
• 2015

This study examined the mechanical properties and the flame retardant properties of CR rubber containing inorganic flame retardant with various contents of aluminium trihydroxide (ATH, $Al(OH)_3$). The content of aluminium trihydroxide was added in 0, 30, 50, 70 and 100 phr for T1~T5 samples. It was found that increasing the amount of addition over 30 phr resulted in decreasing the mechanical properties. On the other hand in oxygen index measurements T1 sample showed a value of 38.6%, indicating the improvement of flame retardant properties showed a value of 49.7~64.2%. In case of burn test, it was confirmed that CR rubber containing over ATH 50phr content showed performance corresponding to that of first grade fire-resistance.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.40-45
• /
• 2020

In this study, the mechanical and flame-retardant properties of ethylene-propylene-diene-termonomer (EPDM) based rubber compounds and various other environmentally friendly inorganic flame retardants were investigated. Alumina trihydrate (ATH) and magnesium hydroxide (MDH) were used as inorganic flame retardants. The mechanical properties after thermal oxidation aging and the flame-retardant properties of the EPDM compounds were measured using a moving die rheometer, a universal testing machine, a compression set, and a UL 94 V flammability test. We focused on how the properties were affected by the type and amount of flame retardants. The results demonstrated that the optimal mechanical and flame-retardant V-0 grade properties were obtained at an ATH content of 200 phr.

• Journal of Bio-Environment Control
• /
• v.13 no.2
• /
• pp.81-89
• /
• 2004

This study was conducted in a commercial plug glasshouse in Sacheon to examine the possibility of producing tomato plug seedlings using various growing media containing cellular glass foam (CGF)and carbonized chestnut woodchips (CCW) as medium components. Plug seedlings of 'Seogun' tomato were grown in media containing 50% CCW＋50% peatmoss, 33% CGF＋67% peatmoss, and 50% peatmoss＋50% granular rockwool. A commercial plug medium (Tosilee) was used as the control. All seeds were sown in 200 cell plug trays on November 28, 2001. Seedling growth was measured at 31 days after sowing. Each treatment showed a similar growth result as compared to the control. Plant height, root grade, fresh weight, and air space and bulk density of the medium were significantly greater in the 33% CGF＋67% peatmoss treatment than those in the other media. However, growth was slightly suppressed in the 50% CCW＋50% peatmoss. pH and EC of the media were the highest in the control treatment, although no toxicity symptoms had been observed. The results suggest that perlite can be replaced with a new material such as CGF in the commercial scale production of plug seedlings of 'Seogun' tomato.

• Radiation Oncology Journal
• /
• v.30 no.3
• /
• pp.108-116
• /
• 2012

Purpose: To investigate the prognostic factors and effectiveness of postoperative radiotherapy alone for endometrial carcinoma. Materials and Methods: Sixty four patients with stage I-III endometrial cancer (EC) treated with postoperative radiotherapy alone between January 1989 and December 2008 at the Keimyung University Dongsan Medical Center were chosen for the present study. Typically, total hysterectomy, salpingo-oophorectomy and lymphadenectomy were performed on the patient's pelvis. Total dose from 50.4 Gy to 63 Gy was irradiated at pelvis or extended field. Thirteen patients were treated with Co-60 or Ir-192 intracavitary radiotherapy. Follow-up periods were from 7 to 270 months, with a median of 56 months. Results: Five year overall survival (OS) rate was 58.7%, respectively. Five year disease-free survival (DFS) rate was 59.2%, respectively. In univariate analysis for OS and DFS, stage, menopausal age, type of operation, serosal invasion, and lymph node involvement were found to be statistically significant. Histologic type was marginally significant. In multivariate analysis for OS and DFS, stage, types of operation, histologic type were also found to be statistically significant. Treatment failure occurred in 14 patients. The main pattern of failure was found to be distant metastasis. Time to distant metastasis was from 3 to 86 months (median, 12 months). There were no grade 3 or 4 complications. Conclusion: Stage, types of operation, and histologic type could be the predictive prognostic factors in patients. We contemplated postoperative radiation as effective and safe treatment method for EC. Additional treatment would be needed to reduce distant metastasis.

• Steel and Composite Structures
• /
• v.52 no.4
• /
• pp.419-434
• /
• 2024

A flat slab is a structural system where columns directly support it without the presence of beam elements. However, despite its wide advantages, this structural system undergoes a major deficiency where stresses are concentrated around the column perimeter, resulting in the progressive collapse of the entire structure as a result of losing the shear transfer mechanisms at the cracked interface. Predicting the punching shear capacity of RC flat slabs is a challenging problem where the factors contributing to the overall slab strength vary broadly in their significance and effect extent. This study proposed a new expression for predicting the slab's capacity in punching shear using a nonuniform concrete tensile stress distribution assumption to capture, as well as possible, the induced strain effect within a thick RC flat slab. Therefore, the overall punching shear capacity is composed of three parts: concrete, aggregate interlock, and dowel action contributions. The factor of the shear span-to-depth ratio (a_v/d) was introduced in the concrete contribution in addition to the aggregate interlock part using the maximum aggregate size. Other significant factors were considered, including the concrete type, concrete grade, size factor, and the flexural reinforcement dowel action. The efficiency of the proposed model was examined using 86 points of published experimental data from 19 studies and compared with five code standards (ACI318, EC2, MC2010, CSA A23.3, and JSCE). The obtained results revealed the efficiency and accuracy of the model prediction, where a covariance value of 4.95% was found, compared to (13.67, 14.05, 15.83, 19.67, and 20.45) % for the (ACI318, CSA A23.3, MC2010, EC2, and JSCE), respectively.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.41-46
• /
• 2004

The influence of pollutant loads on the water quality in Jeongeupcheon of Dongjin river was evaluated from Jan. 2002 to Dec. 2003 for two years. The range of pH in water was $6.87{\sim}7.53$. The EC level in upstream ranged from 83 to $95\;{\mu}s/cm$ with the highest value in autumn. The BOD level in upstream rang ed from 0.61 to 1.27 mg/L, which would be I grade according to water quality criteria by Ministry of Environment, but that in downstream was III grade. The average T-N level in midstream ranged from 6.10 to 10.84 mg/L which was the highest values throughout the stretch of the river. The average T-P levels ranged from. 0.41 to 0.98 mg/L Jeongeupcheon was suitable for the agricultural usage based upon one year analysis of river water quality. The effluent loads of BOD was high in midstream (J4) with 553 kg/day. The major sources of T-N loads were livestock, population, land use, and industry in order. The effluent loads of T-N was high in J4 by population and industry while that of T-N was high in J5 and J6 by livestock and land use. The delivered loads of T-N was high in downstream The delivered loads of T-P was low as compared with those of BOD and T-N. The delivery ratio of T-N ranged from 6 to 38%.

• Journal of the Korean Geographical Society
• /
• v.32 no.4
• /
• pp.445-462
• /
• 1997

This study was conducted to analyze the spatial and temporal characteristics of stream water quality and to charify the management of watershed environment from the standpoint of hydrological geography. To achieve the purpose of the study, the Wangsook River was chosen. As the result of this study, the specific conclusions were drawn. 1. In general, WT(water temperature) of the downstream is higher than that of the upstream. The value of winter WT measured in densely populated area is higher than that measured under the natural conditions. The seasonal variation of WT at upstream sites is greater than that of downstream. 2. Rhe water quality of main channel is dependent on that of tributaries. Especially, the values of pH, EC, TDS in main channel depend upon those of tributaries. Among the tributaries of the Wangsook river, the Jingun-chon and Yongam-chon have mostly influence on the water quality of the main channel. 3. Generally, the values of COD measured in the Wangsook River are over the 5th Grade considering from a point of water quality standards of inland lake. However, BOD, phosphorus and nitrogen concentrations have to be measured to clear the water quality conditions of the river. 4. The regional people who live in the catchment of Wangsook river have different perception about the water pollution of the river. The regional people lacks in the understanding of the Wangsook river cause a bad influence upon the hydrological management of watershed environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2025-2036
• /
• 2000

A physicochemical process called ultra rapid coagulation(URC) was applied as a pilot scale to recover eutrophicated lake water at Inkyung Lake located on-campus in Inha university. The URC was uniquely designed to completely remove the presence of phosphorus up to 95%, which in turn leading to lessen the level of eutrophication of lake. For a pilot test of period, the lake was restored showing Carlson's Trophic State Index(TSI) of mesotrophic state which accounts for the reduction of total phosphorus and chlorophyll-a down to approximately 55 from 70 and 73, respectively. A residual presence of aluminum and additional coagulants in the effluent was tested for their potential effects on Photobacterium phosphoreum. The effect concentration ($EC_{50}$-15 min) observed in the effluent revealed that the bioactivity of Photobacterium phosphoreum was not influenced by the residual presence of coagulants. After the pilot test of period, the lake was consequently restored as a mesotrophic state in obtaining the second grade of lake water quality. The URC may be further applied for restoration of greater scale of lake in eutrophication.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.767-787
• /
• 2016

In this study, we analyzed on-site monitoring data for 15 tributaries in Geumho watersheds for 3 years (2011-2013) in order to sort out priorities on water quality characteristics and improvement. As a result of estimating contribution to contamination of the tributary rivers, Dalseocheon showed the highest load densities, despite the smallest watershed area, with 22.7% $BOD_5$, 30.7% $COD_{Mn}$, 31.3% TOC and 47.6% TP. After conducting PCA (principal component analysis) and FA (factor analysis) to analyze water quality characteristics of the tributary rivers, the first factor was classified as $COD_{Mn}$, TOC, EC, TP and $BOD_5$, the second factor as pH, Chl-a and DO, the third factor as water temperature and TN, and the fourth factor as SS and surface flow. In addition, arithmetical sum of each factor's scores based on grading criteria revealed that Dalseocheon and Namcheon were classified into Group A for their highest scores - 96 and 93, respectively -, and selected as rivers that require water environmental management measures the most. Also, water environmental contamination inspection showed that Palgeocheon had the most number of aquatic factors to be controlled: $BOD_5$, $COD_{Mn}$, SS, TOC, T-P, Chl-a, etc.