• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.12
• /
• pp.1712-1720
• /
• 2014

Little is known about the gender differences in energetic requirements of goats in early life. In this study, we determined the energy requirements for maintenance and gain in intact male, castrated male and female Saanen goat kids using the comparative slaughter technique and provide new data on their body composition and energy efficiency. To determine the energy requirements for maintenance, we studied 21 intact males, 15 castrated males and 18 females ($5.0{\pm}0.1kg$ initial body weight (BW) and $23{\pm}5d$ of age) using a split-plot design with the following main factors: three genders (intact males, castrated males, and females) and three dry matter intake levels (ad libitum, 75% and 50% of ad libitum intake). A slaughter group included three kids, one for each nutritional plane, of each gender, and all three animals within a group were slaughtered when the ad libitum kid reached 15 kg in BW. Net energy requirements for gain were obtained for 17 intact males, eight castrated males and 15 females ($5.1{\pm}0.4kg$ BW and $23{\pm}13d$ of age). Animals were fed ad libitum and slaughtered when they reached 5, 10, and 15 kg in BW. A digestion trial was performed with nine kids of each gender to determine digestible energy, metabolizable energy and energy metabolizability of the diet. Our results show no effect of gender on the energy requirements for maintenance and gain, and overall net energy for maintenance was $205.6kJ/kg^{0.75}$ empty body weight gain (EBW) ($170.3kJ/kg^{0.75}$ BW) from 5 to 15 kg BW. Metabolizable energy for maintenance was calculated by iteration, assuming heat production equal to metabolizable energy intake at maintenance, and the result was $294.34kJ/kg^{0.75}$ EBW and $k_m$ of 0.70. As BW increased from 5 to 15 kg for all genders, the net energy required for gain increased from 9.5 to 12.0 kJ/g EBW gain (EWG), and assuming $k_g=0.47$, metabolizable energy for gain ranged from 20.2 to 25.5 kJ/g EWG. Our results indicate that it is not necessary to formulate diets with different energetic content for intact male, castrated male and female Saanen goat kids weighing from 5 to 15 kg.

• Journal of Welding and Joining
• /
• v.6 no.2
• /
• pp.1-8
• /
• 1988

고밀도 에너지빔의 하나인 플라즈마를 이용한 절단 및 용접법은 알루미늄, 스테인레스강 등 특수금속의 가공에 적용될 수 있고, 산소용접 및 절단, SMAW, GMAW, GTAW 등의 거래식 열 가공법에 비해서 부품의 정밀도, 가공속도면에서 유리하여 그 사용범위가 점점 넓어지고 있다. LBW, LBC, EBW 등과 마찬가지로 Keyholing 현상을 이용할 수 있어 높은 용입깊이를 나타낼 수 있는 장점이 있으며, 그 성능면에서는 위 방법들과 비교해 볼 때 가공속도, 가공부의 성질 등에서 불리하고, 장치의 저렴, 조작의 간편함 등에서 유리하기 때문에, 경쟁 및 상호보완의 관계를 유지시켜 나갈 것으로 기대된다. 수동가공과 자동가공이 모두 가능하나 부품의 정밀도와 생산성 향상을 위해서는 플라즈마 가공공정에 적합한 자동화 장치의 개발이 필요하다.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1869-1871
• /
• 1998

In this paper, we designed and fabricated a fast switching system for high power pulse. This system consists of a voltage conversion circuit, high voltage charging circuit, trigger circuit, and discharging circuit. Especially discharging line is designed by strip-line for low inductance and resistance. The experimental result is that current slew rate of the system is 6.67kA/86ns and this result is fully qualified for initiating EBW or EFI

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.121-127
• /
• 1998

Thirty two Omani sheep with eight animals each of; intact males (INT), males castrated with rubber rings immediately after birth (RR), males castrated with a burdizzo at 8 weeks of age (BC) and intact females (IF) were fed ad libitum a concentrate diet (CP 16%) plus chopped Rhodesgrass hay (8% CP) from weaning until slaughter at 28 kg. INT lambs grew faster from 9 to 20 weeks of age (p < 0.05) thus they were significantly heavier at 20 weeks of age than BC and IF, but not RR lambs. INT consumed more total feed than other sex groups over the period from 9 to 20 weeks of age. There were no significant differences between lambs of all experimental groups in feed per gain ratio. INT lambs had lower (p < 0.01) dressing percentage (DP) than RR, BC and IF. As a percentage in the empty body weight (EBW), INT had higher proportions of head, feet, empty gut (p < 0.001), liver (p < 0.05) and genitals (p < 0.05) but lower proportions of lungs and trachea (p < 0.05) than BC and IF lambs. INT males had a significantly higher (p < 0.05) proportion of bone than RR and IF lambs but lower (p < 0.05) proportion of fat than RR and IF. As a percentage in EBW, IF had the highest protortion (p < 0.001) of total body fat (TBF) followed by BC and RR whereas INT males had the lowest proportion. There was a general trend of IF having the highest proportion of individual and total non-carcass fat (TNCF) and total carcass fat (TCF) followed by BC and RR lambs whereas INT lambs had the lowest protortions of individual carcass and non-carcass fat depots. There were only few sex or castration effects on carcass tissue distribution. IF had higher proportions of intermuscular fat in the chuck, plate, leg and flank than INT and BC. The current study demonstrated that castration of intensively-raised male Omani native sheep especially at weaning using a burdizzo retarded growth rate and reduced carcass quality by increasing fat content.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.515-519
• /
• 2011

Structural tests for the mixing head of a 75tonf class thrust chamber were performed to verify structural stability. The mixing head of a thrust chamber is loaded by high pressure with regeneratively cooled fuel and cryogenic liquid oxygen(LOx) as well as it transfers thrust load generated by liquid rocket engine. Therefore structural stability of mixing head is a very important factor to work without any plastic deformation or structural failure. In this study, two mixing heads were manufactured using different welding methods, Tungsten Inert Gas(TIG) welding and Electron Beam Welding(EBW) and evaluated a structural stability. The results of structural tests showed that the mixing head assembled by EBW can withstand the applied design load without any structural failures and be structurally more stable than that of TIG welding.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.9
• /
• pp.1282-1288
• /
• 2013

A comparative slaughter trial was conducted to estimate the phosphorus (P) requirement for maintenance and growth of crossbred lambs of Dorper with a Chinese indigenous sheep breed, thin-tailed Han sheep. Thirty-five Dorper${\times}$thin-tailed Han crossbred, noncastrated ram lambs ($20.3{\pm}0.22kg$ of shrunk body weight (SBW)) were used. Seven lambs were randomly chosen and slaughtered at 20 kg SBW as the baseline group for measuring initial body composition. Another seven lambs were also randomly chosen and offered a pelleted mixed diet for ad libitum intake and slaughtered at 28 kg SBW. The remaining 21 sheep were randomly divided into 3 groups with 7 sheep each and subject to the same diet of either 70 or 40% of ad libitum intake. The 3 groups were slaughtered when the sheep fed ad libitum reached 35 kg of SBW. Body P contents were determined after slaughter. The results showed that the net P requirement for maintenance was 30.0 mg/kg of empty body weight (EBW) or 23.4 mg/kg body weight (BW), and the P requirement for growth decreased from 5.3 to 5.0 g/kg of EBW gain as the lamb grew from 20 to 35 kg. The net P requirement for growth of Dorper${\times}$thin-tailed Han crossbred ram lambs was lower than that of sheep adopted by the American nutritional system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.269-275
• /
• 2020

An explosive bolt is one of many representative pyrotechnic release devices that separates two joined structures using explosives inside the bolt. In this study, a 1/2 inch ridge-cut explosive bolt with an EBW detonator was developed for usage in sled tests. The initial shape design was carried out based on the design method, and the performance test showed that the separation performance was outstanding but fragments occurred. Therefore, numerical analysis was performed to reduce the amount of debris by minimizing the amount of explosives. From the numerical analysis, the separation mechanism and characteristics of the ridge-cut explosive bolts were identified, and the minimum amount of explosives that does not generate debris was proposed. Verification tests revealed that the ridge-cut explosive bolts with the proposed explosive weight minimized fragments while maintaining the separation performance.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.50-57
• /
• 2013

Characterization of microstructures and cryogenic mechanical properties of electro beam (EB) welds between cast and forged Inconel 718 superalloys has been investigated. Optimal EBW condition was found in the beam current range of 36~39 mA with the constant travel speed of 12 mm/s and arc voltage of 120 kV for 10 mm-thick specimens. Electron beam current lower than 25 mA caused to occur the liquation microfissuring in cast-side heat affected zone (HAZ) of EB welds. The HAZ liquation microfissure was found on the liquated grain boundaries with resolidified ${\gamma}/Laves$ and ${\gamma}/NbC$ eutectic constituents. EBW produced welds showing a fine dendritic structure with relatively discrete Laves phase due to fast cooling rate. After post weld aging treatment, blocky Laves phase and formation of ${\gamma}^{\prime}+{\gamma}^{{\prime}{\prime}}$ strengtheners were observed. Presence of primary strengthener and coarse Laves particles in PWHT weld may cause to reduce micro-plastic zone ahead of a crack, leading to a significant decrease in Charpy impact toughness at $-196^{\circ}C$. Fracture initiation and propagation induced by Charpy impact testing were discussed in terms of the dislocation structures ahead of crack arisen from the fractured Laves phase.

• Journal of Welding and Joining
• /
• v.35 no.1
• /
• pp.49-54
• /
• 2017

In this study, the volumetric heat source in electron beam welding (EBW) is modeled through finite element method taking advantage of ABAQUS software package. Since this welding method is being applied in plates with different thicknesses and also considering that residual stresses reduce the strength of these weldments, the effect of thickness in the distribution and magnitude of residual stresses after welding is studied. Regarding the vast application of Inconel 706 super-alloy in aerospace industries, this material was selected in the current research. In order to validate the finite element model, the obtained results were compared to those of other researchers in this area, and good agreement was observed. The simulation results revealed that increase in the plate thickness leads to increase in the residual stresses. In addition heat treatment in the base metal (before welding) increases the residual stresses significantly.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.116-125
• /
• 1997

Electron beam weldability of 9%Ni steels has been investigated to apply EBW to the construction of LNG storage tank. While mechanical properties of welded joints were satisfied by ASTM specification, impact energy of weld metal was as low as 27 - 55J at $-196^{\circ}C$. As the result of Ni wires inserted at the joint to be welded, Ni content of weld metal was increased to about 10%, resulting on the improvement of impact toughness to 110 ~ 120J at $-196^{\circ}C$. This improvement of impact toughness in weld metal was due to the formation of tempered martensite and retained austenite. Above results indicate that, if Ni content of weld metal was increased about 10% by Ni wires addition, electron beam welded 9%Ni steels weld metal had sufficient impact energy necessary for a LNG storage tank.