• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.493-497
• /
• 2000

현재 국내의 바코드 체계는 거의 모든 항목에 관하여 KAN-13 코드의 체계를 이용하고 있으며, 이는 상품정보에 관련하여 국가코드, 제조업체코드, 상품품목코드, 체크디지트의 4개 부분에 각각의 성질에 따른 내용을 담아 그 상품의 특성을 나타낸다. KAN-13은 상품 각각의 성질을 나타내는 데에는 문제가 없지만 매입, 매출 및 재고업무 관리 등의 물류정보에 관련된 정보를 자동화·전산화하기 위해서는 적합하지 못하다. 이를 보충하기 위해 KAN-13 코드의 체계에 한 자리의 물류 식별코드가 추가되어 박스 단위를 표시할 수 있는 EAN-14 코드 체계의 도입이 필연적이다. 본 논문에서는 기존의 국내외 각 분야에 사용되어 진 EAN-13 코드와 EAN-14 코드의 사례를 비교 분석하여 국내의 EAN-14 코드 사용의 필연성을 제시하였고, 각 분야 중 특히 의약품의 사례를 중심으로 살펴보았다. 향후 EAN-14 코드의 체계는 좀더 구체적이고 광범위한 정보를 담고 있는 바코드 체계인 EAN-128 코드 체계의 구현을 위한 기반을 조성하게 될 것이다.

• The monthly packaging world
• /
• s.86
• /
• pp.95-102
• /
• 2000

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.55-61
• /
• 2010

Significant air temperature increases in urban areas are known as the heat island phenomenon in a global scale. Therefore, we use CFD simulation in order to analyze quantitative effects by placing a Building and Green on the heat island phenomenon in urban area. The present study quantitatively analyzes the Urban Heat Island Effects, Outdoor air temperature, and Humidity and air flow.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.3
• /
• pp.169-181
• /
• 2010

This paper presents a feasibility study of a fresh air load reduction system by using an underground double floor space. The fresh air is introduced into the double slab space and passes through the opening bored into the footing beam. The air is cooled by the heat exchange with the inside surface of the double slab space in summer, and heated in winter. This system not only reduces sensible heat load of the fresh air by heat exchange with earth but also reduces latent heat load of the fresh air by ad/de-sorption of underground double slab concrete. In this paper, we proposed a simplified presumption method for the prediction of cooling and heating performance in the system. In conclusion the proposed method has been verified by comparing with the calculated value of the numerical analysis model by using nonlinear two-dimension hygroscopic question.

• Child Health Nursing Research
• /
• v.5 no.3
• /
• pp.349-357
• /
• 1999

Injuries are important causes of death and disability. The Purpose of this study was to determine how often preschoolers have injuries and what factors affect the injury occurrences. The sample consisted of 360 Preschoolers who were registered at eight nurseries located in Sedaemoongu. Seoul. The data were analyzed using the SAS PC statistical package. The results of the study are as follows: During last 12 months 73.1% of 360 preschoolers had accidental injuries In an analysis of the location where the injury took place, showed that the most places were in the nursery(17.3%) and around home(14.4%), and the most place inside home were in the bedroom(13.9%) and living room(13.9%). There were the diverse and injurious risks inside the home as well as around home. The most frequent type of injury was abrasion(27.5%) and most children injured their legs(28.3%). They were treated most frequently at home(52.8%) and usually emergency treatment was performed by family members with disinfection being the main type of first aid To identify factors related to injury occurrence, multiple logistic regression was performed and the main factors were the age of child, active tendency, and mother's education level.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.174-183
• /
• 2011

This paper is about a bar code decoding algorithm developed for smart phone applications. The algorithm consists of bar code data extraction procedure, bar code signal estimation procedure, and bar code decoding procedure. To detect the peak bar code module, a DSTW had been applied because of its outstanding performance in ECG peak detection. In order to minimize errors due to non-uniform light effect, the proposed algorithm was acted as a baseline wandering filter based on module peaks detection. The algorithm had been tested to evaluate the performance under the conditions of blurring, non-uniformed light and white noises. The algorithm had shown excellent performance in reconstruction of bar code decoding, compared to other conventional methods. In order to show the possibility of applying the algorithm to a smart phone, a real UPC-A type 150 bar code pictures obtained from a smart phone camera was applied to the algorithm, achieving the correct recognition rate of 97.33%.

• Journal of Environmental Science International
• /
• v.21 no.1
• /
• pp.69-81
• /
• 2012

This study forecasts changes in thermal environment and microclimate change per new building construction and assignment of green space in urban area using Computational Fluid Dynamics(CFD) simulation. The analysis studies temperature, humidity and wind speed changes in 4 different given conditions that each reflects; 1) new building construction; 2) no new building construction; 3) green spaces; and 4) no green spaces. Daily average wind speed change is studied to be; Case 2(2.3 m/s) > Case 3. The result of daily average temperate change are; Case 3($26.5^{\circ}C$) > Case 4($24.6^{\circ}C$) > Case 2($23.9^{\circ}C$). This result depicts average of $2.5^{\circ}C$ temperature rise post new building construction, and decrease of approximately $1.8^{\circ}C$ when green space is provided. Daily average absolute humidity change is analysed to be; Case 3(15.8 g/kg') > Case 4(14.1 g/kg') > Case 2(13.5 g/kg'). This also reveals that when no green spaces is provided, 2.3 g/kg' of humidity change occurs, and when green space is provided, 0.6 g/kg change occurnd 4(1.8 m/s), which leads to a conclusion that daily average wind velocity is reduced by 0.5 m/s per new building construction in a building complex.

• Journal of Mushroom
• /
• v.8 no.4
• /
• pp.142-149
• /
• 2010

This study was conducted to investigate the physiological activities of the ethanol extracts from 10 different strains of Pholiota nameko. In addition, the ${\beta}$-glucan and polyphenol contents from these strains were also measured. Total polyphenol contents from all the strains were more than 40 mg% with the highest content of $61.50{\pm}0.59$ mg% and ${\beta}$-glucan contents were 30% with the highest content of $37.20{\pm}1.12%$. The highest inhibitory activities on ${\alpha}$-amyloglucosidase activity and nitric oxide production were $13.78{\pm}0.56%$ and $56.59{\pm}7.11%$, respectively. However, ethanol extracts from all the strains have little effects on DPPH radical and nitrite scavenging rates and the activity of angiotensin I converting enzyme. The cytotoxic activity of ethanol extracts from all the strains on A549 cell was shown upto 30% with the highest effect of $47.96{\pm}8.46%$ treated at 1 mg/mL concentration.

• Korean Journal of Materials Research
• /
• v.13 no.9
• /
• pp.572-580
• /
• 2003

Synthesizing behavior and microstructural evolution of $CaZrO_3$and $m-ZrO_2$in a thermal reaction process of $ZrSiO_4$-$xCaCO_3$mixtures, where x is 7 and 19, were investigated to determine the addition amount of CaO in CaO:$ZrO_2$:$SiO_2$ternary composition. CaZrO$_3$-Ca$_2$SiO$_4$precursor prepared by the mixture of $ZrSiO_4$and CaCO$_3$in aqueous suspending media was controlled to the acidic (pH=4.0) condition with HCI solution to enhance the thermal reaction. The addition amount of dispersant into the $ZrSiO_4$-$xCaCO_3$slip increased with increasing mole ratio of $CaCO_3$, which was associated with the viscosity of slip. Decarbonation reaction was activated with an increase of the addition amount of $CaCO_3$, showing different final temperatures in $ZrSiO_4$-$7CaCO_3$and $ZrSiO_4$-$19CaCO_3$mixtures as about 980 and 116$0^{\circ}C$, respectively, for finishing decarbonation reaction. The grain morphology was changed to spherical shape for all samples with an increase of sintering temperature. The grain size and phase composition of the synthesized composites depended on the mixture ratio of Zrsi04 and CacO3 powders, indicating that the main crystals were m-ZrO2 ($\leq$3 $\mu\textrm{m}$) and $CaZrO_3$ ($\leq$ 7 $\mu\textrm{m}$) in $ZrSiO_4$$>-7CaCO_3$and $ZrSiO_4$-$19CaCO_3$mixtures, respectively.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.251-258
• /
• 2003

The effects of the salt and the precursor pH on the synthesizing behavior and the morphology of mullite have been studied. Two kinds of mullite precursor sols were prepared by the dissolution of two kinds of salt (aluminum nitrate enneahydrate, Al($NO_3$)$_3$ㆍ$9H_2$O; type I and aluminum sulfate 14∼18 water, (SO$Al_4$)$_3$$\cdot$$14∼18H_2$O; type II) into the mixture of colloidal silica sol, respectively. Precursor pH of the sols was controlled to the acidic (pH= 1.5∼2) and basic (pH= 8.5∼9) conditions. The co-products with nitrate and sulfate were completely eliminated at $500^{\circ}C$ and $850^{\circ}C$, respectively, which was confirmed by TG/DTA results. The synthesizing temperature of mullite phase was found to be above $1200^{\circ}C$ for pH= 1.5∼2 and above $1300^{\circ}C$ for pH= 8.5∼9 in type I. However, in type II, the synthesizing temperature of mullite was decreased to $850^{\circ}C$ for pH= 1.5∼2 and $1100^{\circ}C$ for pH= 8.5∼9. The grain size of the mullite synthesized at pH= 8.5∼9 was larger than that at pH= 1.5∼2 in overall heat-treated temperatures, showing smaller grain size in type II. Aspect ratio of the mullite grains was more increased at pH= 1.5∼2 than pH= 8.5∼9 in type I, showing similar aspect ratio at both pH conditions in type II. It was found that the synthesizing temperature and grain size were predominantly governed by the initial precursor pH and decomposition of the salt, with minor effect on the grain morphology.