• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.174-183
• /
• 2011

This paper is about a bar code decoding algorithm developed for smart phone applications. The algorithm consists of bar code data extraction procedure, bar code signal estimation procedure, and bar code decoding procedure. To detect the peak bar code module, a DSTW had been applied because of its outstanding performance in ECG peak detection. In order to minimize errors due to non-uniform light effect, the proposed algorithm was acted as a baseline wandering filter based on module peaks detection. The algorithm had been tested to evaluate the performance under the conditions of blurring, non-uniformed light and white noises. The algorithm had shown excellent performance in reconstruction of bar code decoding, compared to other conventional methods. In order to show the possibility of applying the algorithm to a smart phone, a real UPC-A type 150 bar code pictures obtained from a smart phone camera was applied to the algorithm, achieving the correct recognition rate of 97.33%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.434-441
• /
• 2005

For LDPC decoding, received symbols are splitted bit by bit based using the received in-phase and quadrature components. The method of bit-splitting is affected on decoding performance because its method depend on distance over symbol constellation. Therefore this paper propose the bit split method using the sector information with sacrifice a little performance loss compared to Euclidean distance method. Futhermore DVB-S2 specification supports BC(Backward Compactible) mode which using the hierarchical modulation method, this paper also analyze the decoding performance according to deviation angle of 8PSK constellation for various LDPC coding rates.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.113-122
• /
• 2007

In shipbuilding industry, musculoskeletal disorders increase rapidly since 2001. Musculoskeletal disorders was occurred the number of 735 in 2003 and the number of 479 on the whole in 2002 and is increased. About this, it is in progress actively that a lot of research services for problem grasping and technology seminar for prevention of musculoskeletal disorders of shipbuilding industry with KOSHIPA (The Korea Shipbuilding Association) in the center in 2002. But, it is actuality that the research is in many difficulties by absence of basic data in shipbuilding industry that most un-standardization work forms. Therefore, this study analyzed present condition of musculoskeletal disorders to shipbuilding industry that most un-standardization work forms. Also, we analyzed on the subject of the Centering-work that appearance extremely much musculoskeletal disorders.

• Child Health Nursing Research
• /
• v.5 no.3
• /
• pp.349-357
• /
• 1999

Injuries are important causes of death and disability. The Purpose of this study was to determine how often preschoolers have injuries and what factors affect the injury occurrences. The sample consisted of 360 Preschoolers who were registered at eight nurseries located in Sedaemoongu. Seoul. The data were analyzed using the SAS PC statistical package. The results of the study are as follows: During last 12 months 73.1% of 360 preschoolers had accidental injuries In an analysis of the location where the injury took place, showed that the most places were in the nursery(17.3%) and around home(14.4%), and the most place inside home were in the bedroom(13.9%) and living room(13.9%). There were the diverse and injurious risks inside the home as well as around home. The most frequent type of injury was abrasion(27.5%) and most children injured their legs(28.3%). They were treated most frequently at home(52.8%) and usually emergency treatment was performed by family members with disinfection being the main type of first aid To identify factors related to injury occurrence, multiple logistic regression was performed and the main factors were the age of child, active tendency, and mother's education level.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.9
• /
• pp.679-684
• /
• 2012

This paper aims to evaluate performances of ventilation and insulation of 6types PVS(Passive ventilation skin) by numerical simulation. The results are as follows. 1) The result of Performance of ventilation by pressure difference, it was shown that the amount of ventilation changed bigger under 1Pa and amount of ventilation increased according to increase opening area (${\alpha}A$). Although same opening area of PVS, it can predict that pressure differences cause ventilation differences. 2) In case of same opening area of PVS, however, it was changed the amount of ventilation each types of PVS that is distinguished opening area by flow coefficient. 3) Dynamic U-value that represents performance of insulation PVS was similar change upper ${\alpha}A40\;cm^2/m^2$, great change in casse of 0.1 Pa pressure difference. In case of ${\alpha}A10\;cm^2/m^2$, it was changed bigger under 0.3 Pa pressure difference, ${\alpha}A20\;cm^2/m^2$ of PVS was changed under 0.2 Pa pressure difference.

• KIEAE Journal
• /
• v.17 no.5
• /
• pp.25-31
• /
• 2017

Purpose: Currently, there are many success stories coming out various energy-saving / production or eco-friendly buildings. However, these case and method didn't consider of application with existing housing and high-rise housings. In the case of Europe, the North America is gradually grew and settle through the voluntary, small, private development. But this method and system are not fit for the majority of developing countries including South Korea. Method: In this situation, this paper analyse, first arranged previous research and case study, second divided factors and re-organized factors, third analysed plan and elevation of apartment and selected main plan type and elevation type of apartment, finally analysed method of application with existing buildings and high-rise buildings by test and simulation. Result: In sum, this research finally analyzed the change of electricity and fuel consumption according to the change of insulation standard. This study has been expected to serve as a bridge of the energy housing system development and suggest new method applied to the existing housing and building.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.2
• /
• pp.36-46
• /
• 2021

The purpose of this study is to ensure safety by proactively identifying hazards that could be derived from changes in mission form and environment as the advanced aircraft such as F-35A stealth fighter, KC-330 Multi-role transport and tanker, RQ-4B high altitude unmanned reconnaissance aircraft, etc are introduced that the Republic of Korea Air Force(ROKAF) has never been operated so far. To this end, the safety management methods based on proactive and predictive approaches used in advanced countries(US Air Force, UK Royal Air Force, Royal Australian Air Force) operating aircraft types same or similar things being newly powered by the ROKAF were reviewed. In addition, the direction for improvement of the safety management methods operating in the ROKAF and the measures necessary for establishment of the new safety management techniques to be applied were suggested.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2373-2379
• /
• 2023

In sodium systems, leakage is one of the safety concerns; it can cause chemical reactions, which may result in fires. There are contact and non-contact types of leak detectors, and the conventional method of non-contact type detection is by gas sampling. Because of the complexity of this method, there has always been a need for a simple gas sensor, and the resistive-type nanostructure ZnO sensor is a promising option with various advantages. In this study, a ZnO sensor was fabricated, and the concept was tested as a leak detector using a dedicated experiment facility. The experiment results showed distinctive changes in resistance with the presence of sodium aerosol under various conditions. Replacing the conventional gas sampling with the ZnO sensors is expected to enable identification of the leakage location if used as a point-wise instrumentation and to greatly reduce the total cost, making the system simple, light, and effective. For further study, more tests will be performed to evaluate the sensitivity of key parameters under various conditions.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.66-74
• /
• 2024

This study investigates the effects of temperatures and strain rates on the strength and ductility of Gr.91 (ASME Grade 91) steel which is widely being used as a heat-resistant material in Generation IV nuclear and super critical thermal power plants. The tensile behavior of modified 9Cr-1Mo (Gr.91) steel was studied for the three strain rates of 6.67×10^-5/s, 6.67×10^-4/s and 6.67×10-3/s over the temperature range from room temperature (RT) to 650℃. Experimental results showed that at specific combinations of temperatures (300~400℃) and strain rates, serrations appeared in the stress-strain curves. Concurrently, abnormal behaviors such as a plateau in yield strength and tensile strength, a minimum in ductility and negative strain rate sensitivity were observed. These phenomena were analyzed as significant characteristics of dynamic strain aging (DSA). Since this abnormal behavior in Gr.91 steel affects the material strength, it is judged that a correlation analysis between DSA and material strength should be crucial in the design and integrity evaluation of Gr. 91 steel pressure vessel and piping subjected to high-temperature loading.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.75-83
• /
• 2024

In this study, high temperature design and integrity evaluation methodology have been developed for Type 316L stainless steel air-to-sodium heat exchanger which uses 700℃ sodium as coolant. Currently the only design rules that take creep effects into consideration explicitly for the 316L stainless steel subjected to high temperature in the creep range are French RCC-MRx, where elevated temperature designs are possible around 550℃. Absent design coefficients at high temperature were determined based on the material properties newly determined in previous studies, and high-temperature design evaluation methodologies were developed based on 3D finite element analyses on the 700℃ class heat exchanger. In addition, works were conducted on the web-based design evaluation program of HITEP_RCC-MRx including incorporation of material properties and design coefficients up to 700℃. Methodologies on high temperature design evaluations on Type 316L stainless steel high-temperature heat exchanger were suggested.