• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.43-49
• /
• 2013

In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.97-104
• /
• 2011

N,N-Dimethylformamide (DMF) is globally used as an organic solvent in the production of synthetic leather and resins because of its low volatility, making it an attractive industrial material. Despite its excellent property as a chemical solvent, utilization of DMF is somewhat controversial nowadays due to its hazardous effects on exposed workers in work places. Many toxification cases are being reported globally and the number of cases of liver damage is still increasing in developing countries. On account of this, a series of epidemiologic surveys are being conducted to understand the degrees of liver damage caused by DMF exposure. Furthermore, many investigations have been performed to clarify the mechanism of DMF-induced liver toxicity using both human and experimental animal models. This review summarizes the current occupational cases reported on liver damage from workers exposed to DMF in industrial work places and the research results that account for DMF-induced liver failure and possible carcinogenesis. The findings reviewed here show the synergistic toxicity of DMF exposure with other toxicants, which might occur through complicated but distinct mechanisms, which may extend our knowledge for establishing risk assessments of DMF exposure in industrial work places.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.97-105
• /
• 2021

The terahertz wave (THz wave) is a band between infrared and microwaves and is defined as an electromagnetic wave having a frequency of 0.1 to 10 THz band. THz waves have the property of transmitting nonpolar materials, which the visible light cannot be transmitted, such as ceramics, plastics, and paper; and the photon energy is low, such as several meV. For this reason, non-destructive testing equipment based on THz imaging technology can be applied to the industrial field. Recently, THz imaging technology was applied in wide industrial fields, such as automobiles, batteries, food, medical, and security, and being actively studied. In this paper, we describe the research trends of terahertz imaging technology and experimental results. Furthermore, we summarize the recent commercialized terahertz camera. Finally, we present the research results in the field of the human security scanner system.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.65-72
• /
• 2019

This study investigated the effects of temperature ($50^{\circ}C$, $55^{\circ}C$, and $60^{\circ}C$) and time (12 and 24 h) on the cookery properties of sous-vide (SV) processed pork loin. As an indicator of cookery properties, cooking loss, expressible moisture (EM), pH, differential scanning calorimetry (DSC), shear force, total plate count (TPC) and CIE color were measured and compared with fresh (FC) and cooked control (CC, $75^{\circ}C$ for 30 min). SV treatments at $50^{\circ}C$ showed higher tenderness and lower cooking loss comparing to CC. DSC result indicated that thermal transition of collagen was a key factor affecting the cooking loss and shear force of meat. In comparison of CC, risks of insufficient pasteurization and uncooked color generation were not shown in SV processed meat. Therefore, the results indicated that SV had a potential advantage to produce tender and moist meat, and the best SV condition of pork loin was estimated at $50^{\circ}C$ for 24 h.

• Clean Technology
• /
• v.26 no.4
• /
• pp.279-285
• /
• 2020

Laboratories and industrial processes typically involve the use of flammable substances. An important property used to estimate fire and explosion risk for a flammable liquid is the flash point. In this study, flash point data at 101.3 kPa were determined using a SETA closed cup flash point tester on the following solvent mixtures: {2,2,4-trimethylpentane + methylcyclohexane}, {2,2,4-trimethylpentane + ethylbenzene}, and {2,2,4-trimethylpentane + p-xylene}. The purpose of this work is to obtain flash point data for binary mixtures of 2,2,4-trimethylpentane with three hydrocarbons (methylcyclohexane, ethylbenzene, and p-xylene), which are representative compounds of the main aromatic hydrocarbon fractions of petroleum. The measured flash points are compared with the predicted values calculated using the GE models' activity coefficient patterns: the Wilson, the Non-Random Two-Liquid (NRTL), and the UNIversal QUAsiChemical (UNIQUAC) models. The non-ideality of the mixture is also considered. The average absolute deviation between the predicted and measured lower flash point s is less than 1.99 K, except when Raoult's law is calculated. In addition, the minimum flash point behavior is not observed in any of the three binary systems. This work's predicted results can be applied to design safe petrochemical processes, such as identifying safe storage conditions for non-ideal solutions containing volatile components.

• Transactions of Materials Processing
• /
• v.32 no.3
• /
• pp.145-152
• /
• 2023

The Inconel 706 alloy is a nickel-based super alloy and requires a large load for hot forging due to its excellent mechanical properties at high temperature. Rotary forging process is an innovative metal forging process where workpiece is gradually deformed by the revolving conical upper die with an inclination angle. This process allows that the workpiece is partially in contact with an upper die during the process so that the press force is considerably lower compared with the conventional upsetting process. In this study, experiments of rotary forging process and conventional upsetting process for cylindrical parts using Inconel 706 where conducted to investigate the formability of rotary forging process. And microstructure analysis and mechanical properties of Inconel 706 were performed to investigate the effect of rotary forging process on the material property.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.510-515
• /
• 2001

It was first time that low frequency R.F. derived plasma enhanced MOCVD with frimethylborate precursor was used to fabricate a new ternary compound $BO_{x}$ $N_{y}$ . The formation of BON molecule was resulted from nitrogen nitrifying B-O, and forming the angular molecule structure proved by XPS and FT-IR results. The relationship between hardness and film thickness was studied. An thickness-independent hardness was fond about 10 GPa. The empirical calculation of band-gap and UV test result showed that our deposited $BO_{x}$ $N_{y}$ thin film was semiconductor material with 3.4eV of wide band gap. The electrical conductivity, $4.8$\times$10^{-2}$ /($\Omega$.cm)$^{-1}$ also confirmed that $BO_{x}$ $N_{y}$ has a semiconductor property. The roughness detected from the as-grown films showed that there was no serious bombarding effect due to anion in the plasma occurring in the RF frequency derived plasma.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.121-127
• /
• 2023

In this study, a comprehensive investigation was conducted on the morphological and property changes of laser-induced nanocarbon (LINC) as a function of laser process parameters. LINC was formed on the surfaces of polyimide films with different backbone structures under various process conditions, including laser power, scan speed, and resolution. Three different forms of LINC electrodes (i.e., continuous 3D porous graphene, wooly nanocarbon fibers, line cut) were formed depending on the laser power and scan speed. Furthermore, heteroatom doping induced from the chemical structure of the polyimide during laser patterning was found to be effective in modifying the electrical properties of LINC electrodes. The LINC surfaces exhibited different microstructures depending on the laser beam resolution under constant laser power and scan speed, allowing for controllable surface wettability. The correlation between the chemical structure of the polymer substrate, laser process parameters, and carbonized surface properties in this study is expected to be utilized as fundamental understanding for the manufacturing of next-generation carbon-based electronic devices.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.91-97
• /
• 2017

This study was carried out to establish a proper cultivation site and to diagnose the drought tolerance of Heracleum moellendorffii leaves by using pressure-volume curves. As a result of analysing data measured, the leaf of H. moellendorffii showed the osmotic pressure at full turgor (Ψ_o^sat) was -1.0MPa, and that at incipient plasmolysis (Ψ_o^tlp) -1.2MPa. Then, the value of maximum bulk modulus of elasticity Emax was 28MPa, showing the sightly strong drought tolerance of H. moellendorffii. Furthermore, the values of relative water contents RWC^tlp and RWC^* were above 88%, showing that the function of osmoregulation is somewhat better. Thus, responses to water relations such as Ψ_o^sat, Ψ_o^tlp, E_max, RWC^tlp and RWC^* of H. moellendorffii showed it's slightly high drought tolerance property.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.53-69
• /
• 2024

The solubility of Cloxacillin sodium in ethanol, 1-propanol, isopropanol, and acetone solutions was measured at different temperatures. The melting property was also tested by using a differential scanning calorimeter (DSC). Then, the solubility data were fitted using Apelblat equation and λh equation, respectively. The Wilson model and NRTL model were not utilized to correlate the test data, since Cloxacillin sodium will decompose directly after melting. For comparison purposes, the four empirical models, i.e., Apelblat equation, λh equation, Wilson model and NRTL Model, were evaluated by using 1155 solubility curves of 103 solutes tested under different monosolvents and temperatures. The comparison results indicate that the Apelblat equation is superior to the others. Furthermore, a new method (named the calculation method) for determining the Apelblat equation using only three data points was proposed to solve the problem that there may not be enough solute in the determination of solubility. The log-logistic distribution function was used to further capture the trend of the correlation and to make better quantitative comparison between predicted data and the experimental ones for the Apelblat equation determined by different methods (fitting method or calculation method). It is found that the proposed calculation method not only greatly reduces the number of test data points, but also has satisfactory prediction accuracy.