• 제목/요약/키워드: E.A. property

검색결과 1,328건 처리시간 0.028초

홍화(紅花) 종실(種實)의 볶음 조건에 따른 성분(成分)의 변화(變化) (Effects of Roasting Conditions on Components of Safflower(Carthamus tinctorius L.) Seed)

  • 박준홍;김기재;김재철;김세종;박소득
    • 한국약용작물학회지
    • /
    • 제8권3호
    • /
    • pp.194-200
    • /
    • 2000
  • 홍화종실의 볶음처리에 따른 성분의 변화를 조사하고 볶음처리 후 저장기간에 따른 산패의 정도를 측정한 결과 홍화씨의 볶음처리에 따른 수율의 변화에서 볶음온도 및 시간이 증가 할수록 수율이 감소하였다. 홍화의 볶음온도 및 시간에 따른 색도의 변화에서 볶음온도가 높고 볶음시간이 길수록 명도(L)값은 감소하고 적색도(a) 값과 황색도(b) 값은 증가하였으며 전체적인 색차인 ${\Delta}E$ 값은 증가하였다. 관능평가의 결과에서는 홍화종실의 적정 볶음조건은 $190^{\circ}C$ 20분 이었다. 홍화종실에서는 raffinose와 sucrose만이 분리 확인되었다. 이들 유리당은 볶음시간이 길어짐에 따라 그 함량은 급격히 감소하였다. 홍화종실의 산패 정도를 나타내는 과산화 물가 (POV, meq/kg)를 측정 해 본 결과 볶음처리직후에는 거의 과산화물이 생성되지 않았지만 저장기간이 지남에 따라 과산화물값이 높아짐을 보였다. 특히 $150^{\circ}C$를 제외하고는 10개월 이상 저장하는 것은 부적절하였다.

  • PDF

연구장비산업 활성화를 위한 관련 법제 개선방안에 대한 연구 (Study on the Improvement of Relevant Legislative System for Activating Research Equipment Industry)

  • 백운일;한갑운
    • 한국전자거래학회지
    • /
    • 제25권2호
    • /
    • pp.127-146
    • /
    • 2020
  • 해외 선진국은 연구장비의 중요성을 인식하고 연구장비 산업 활성화를 위해 많은 정책적 지원을 하고 있다. 그러나 우리나라는 연구장비산업 활성화를 위한 정책이나 관련 사업을 지원할 수 있는 법률이 없다. 따라서 연구장비산업 활성화를 위한 정책과 사업을 지원하기 위한 입법이 시급하다. 연구장비산업의 글로벌 시장에서 경쟁력을 확보할 수 있도록 별도의 연구장비산업 활성화 특별법을 제정할 필요가 있다고 판단된다. 본 바와 같이 연구장비 산업 육성을 위한 다양한 진흥정책이 개발될 수 있도록 관련 법률에 필요한 사항을 명시해야 한다. 연구장비 산업발전을 촉진하기 위해서는 법에 명시해야 할 필수항목이 세 가지다. 첫째는 연구개발 지원, 둘째는 인프라 개발, 셋째는 비즈니스 육성이다. 각 내용에는 다음과 같은 내용이 포함되어야 한다. 우선 '연구개발 지원'에는 연구개발사업 추진 및 지원 정책항목, 연구장비 개발동향 및 투자동향, 산학관 공동연구, 융·복합·사업화를 위한 연구개발 지원 등이 포함된다. 다음으로 '인프라 개발' 포함될 항목에는 연구장비 클러스터 구축, 관련 지원항목, 전문인력 양성, 연구장비개발기반지역 및 기관 등이 포함되어야 한다. 마지막으로 '사업 육성'에 포함되어야 할 항목은 우수기업 육성 지원사항(우선구매제도 등), 기술이전 및 마케팅 관련 사항, 지식재산 보호에 관한 사항, 해외진출 촉진에 관한 사항 등이다.

물성에 의한 석재의 품질도 (Quality of Building Stones by Physical Properties)

  • 박덕원
    • 지질공학
    • /
    • 제14권1호
    • /
    • pp.61-69
    • /
    • 2004
  • 석재는 주로 장식용 및 조각용으로 사용되며 따라서 우수한 물성도 골고루 지녀야 한다. 다양한 물성 중에서 공극계수가 석재의 유용성을 지배하므로 공극의 성질과 연관하여 석재의 품질구분 설정을 시도하였다. 이 연구에서는 화강암질암류 및 화강암질편마암의 심도별 시추코아 시료가 사용되었다. 공극률과 흡수율의 상관도에서 문경 화강암질편마암($Gn_1$)의 측정치 범위가 가장 넓은 분포상을 보이며, 포천화강암($Gr_2$), 문경화강암($Gr_1$)의 순으로 그 범위는 감소한다. 각 암체의 강도는 변질도에 따라 변화한다. 또한 압축강도와 인장강도와의 상관성에서도 측정치의 범위는 $Gn_1$, $Gr_2$ 그리고 $Gr_1$의 순으로 감소한다. 석재의 품질구분 설정에 있어 공극률이 대표적인 물성으로 채택되어 여러 물성에 대한 상대적인 평가가 이루어졌다. 공극률(n)-비중(G), 흡수율(Ab), 압축강도(${\sigma}_c$), 인장강도(${\sigma}_t$), 쇼아경도(Hs) 그리고 탄성계수($E_{t}$)와의 상관도에서 각 등급별 기준이 설정된다.

ALD 방법으로 제조된 나노급 $TiO_2$에 의한 자외선 차단효과 연구 (UV Absorption of Nano-thick $TiO_2$ Prepared Using an ALD)

  • 한정조;송오성;류지호;윤기정
    • 한국산학기술학회논문지
    • /
    • 제8권4호
    • /
    • pp.726-732
    • /
    • 2007
  • ALD (atomic layer deposition)법을 이용하여 두께를 달리한 $10{\sim}50nm-TiO_{2-x}/quartz$ 구조의 UV 기능성 박막을 형성시켰다. 박막의 두께는 우선 $10nm-TiO_{2-x}$를 성막한 후 엘립소미터로 두께를 확인하였고 나머지 두께는 증착시간을 선형적으로 조절하여 완성하였다. $TiO_2$ 박막 두께에 따른 생성상과 파장대별 흡수도, 가시광선의 투과율을 각각 X선 회절기, UV-VIS-IR 분석기, 접사용 디지털 카메라를 써서 확인하였다. ALD 법으로 제조된 $TiO_{2-x}$는 벌크 $TiO_2$에 비해 비정질 (amorphous)이면서 비정량적인 $TiO_{2-x}$ 형태임을 확인하였다. 380 nm와 415 nm의 흡수단을 보여 $3.0{\sim}3.2eV$의 밴드갭을 가지는 기존의 벌크 $TiO_2$와는 달리, 제작된 $TiO_{2-x}$ 박막은 197 nm와 250 nm의 부근에서 흡수단을 보이는 특징이 있었다. 따라서 장파장대의 자외선을 차단하는 기능을 가진 기존의 벌크 $TiO_2$와는 달리 ALD로 제작된 나노급 $TiO_2$는 단파장대의 자외선을 흡수할 수 있는 기능성이 있었고, 아울러 가시광선대에서 우수한 투과도를 보였다. 새로이 제안된 ALD를 이용한 나노급 $TiO_{2-x}$ 박막은 가시광선의 투과도는 향상시키면서 단파장대의 자외선을 효과적으로 흡수하는 기능성을 가졌음을 확인하였다.

  • PDF

Polarimetry of solar system small bodies using the Seoul National University 61cm telescope and TRIPOL

  • Jin, Sunho;Ishiguro, Masateru;Kwon, Yuna Grace;Geem, Jooyeon;Bach, Yoonsoo P.;Seo, Jinguk;Sasago, Hiroshi;Sato, Shuji
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.64.2-64.2
    • /
    • 2019
  • It is known that lights scattered by comets and asteroids are partially polarized. From polarimetric observations of those objects, we can investigate physical properties, such as albedos, sizes of cometary dust particles and regolith of asteroids. Since the polarization degrees of those objects highly depend on their phase angles (Sun-object-observer's angles), long-term monitoring observations are required. Moreover, comets show unforeseeable activations (i.e., outbursts) which need follow-up observations to understand the mechanism. In order to realize such monitoring and transient observations, we installed the Triple-Range Imager and POLarimeter (TRIPOL) on the 61cm telescope of Seoul National University (Hereafter, SNU) Gwanak campus. With this combination, we can obtain g', r', i' bands photopolarimetric images simultaneously with $8.0^{\prime}{\times}8.0^{\prime}$ field of view and pixel resolution of 0.94" pixel-1. Here, we make a presentation regarding the photometric and polarimetric performances of TRIPOL on the SNU 61cm telescope. In addition, we introduce initial polarimetric results of asteroid and comets with the instruments. First, we determine the limiting magnitudes (defined as magnitudes for S/N=5) of $15.17{\pm}0.06$ (g'-band), $15.68{\pm}0.01$ (r'-band), $16.24{\pm}0.03$ (I'-band), respectively, with total 240-seconds exposure (four 60-seconds exposure images, each was taken at different rotation angle for the half-wave plate). Second, we found that the instrumental polarization is negligibly small, ($-0.32{\pm}0.04%$ in the g', $-0.36{\pm}0.05%$ in the r' and $-0.21{\pm}0.04%$ in the i'-bands), while the polarization efficiencies are large enough to maximize the performance (i.e., $97.52{\pm}0.03%$ in the g', $98.83{\pm}0.02%$ in the r' and $99.15{\pm}0.02%$ in the i'-bands). With the instruments, we made observations of three Jupiter-family comets, 21P/Giacobini-Zinner, 38P/Stephan-Oterma, and 46P/Wirtanen and plan to observe one near-Earth asteroid, (433) Eros, on a trial basis. Especially for comets, we discriminate signals from dust and gas to eliminate gas contamination, which are known to change observed degree of linear polarization, using multi-band images. We confirm that the phase angle dependency of these comets are consistent with previous observations, probably because polarimetric property of Jupiter-family comets are broadly homogeneous unlike asteroids. We will also describe future observation plans using TRIPOL and SNU 61cm telescope.

  • PDF

INFLUENCE OF BASALT FIBRES ON THE PROPERTIES OF FLY ASH BASED GEOPOLYMER BINDER

  • Temuujin, J.;Minjigmaa, A.;Davaabal, B.;Darkhijav, B.;Ruescher, C.H.
    • 한국입자에어로졸학회지
    • /
    • 제12권2호
    • /
    • pp.43-50
    • /
    • 2016
  • The influence of basalt fibres on the compressive strength of the geopolymer type binders has been studied. For the experiments 2 types of the basalt fibres were used, namely chopped and spooled fibres. Both types of basalt fibres were 7-10 micron thick in diameter and cut into pieces of 6 mm length. The fibres were mixed with 1% weight to the fly ash powder, followed by the addition of the activator solution (8M NaOH). The pastes obtained were cured at $70^{\circ}C$ for 20 h revealing compact bodies. Compressive strength was measured after 7 days and microstructure observation performed with SEM. The cube bodies ($2{\times}2{\times}2cm$) reveal compressive strength of 47.25(4.03) MPa, while it decreased to 34.0(9.05) MPa in spooled basalt fibres and to 17.33(5.86) MPa in the chopped basalt fibres containing binder, i.e 76% and 36% of the strength without fibres, respectively. The much weaker compressive strength of the chopped fibres containing binder is related to the absence of significant adhesion between the geopolymer binder and the basalt fibres, forming voids instead. Alkali leaching effect of basalt fibres could probably explain the drop in the compressive strength with spooled and chopped fibres, respectively.

자료 전송 데이터 분석을 통한 이상 행위 탐지 모델의 관한 연구 (A Study on the Abnormal Behavior Detection Model through Data Transfer Data Analysis)

  • 손인재;김휘강
    • 정보보호학회논문지
    • /
    • 제30권4호
    • /
    • pp.647-656
    • /
    • 2020
  • 최근 국가·공공기관 등 중요자료(개인정보, 기술 등)가 외부로 유출되는 사례가 증가하고 있으며, 조사에 따르면 정보유출 사고의 주체로 가장 많은 부분을 차지하고 있는 것이 대부분 권한이 있는 내부자로써 조직의 주요 자산에 비교적 손쉽게 접근할 수 있다는 내부자의 특성으로 외부에서의 공격에 의한 기술유출에 비해 보다 더 큰 피해를 일으킬 수 있다. 이번 연구에서는 업무망과 인터넷망의 분리된 서로 다른 영역(보안영역과 비(非)-보안영역 등)간의 자료를 안전하게 전송해주는 망간 자료전송시스템 전송 로그, 이메일 전송 로그, 인사정보 등 실제 데이터를 이용하여 기계학습 기법 중 지도 학습 알고리즘을 통한 이상 행위 탐지를 위한 최적화된 속성 모델을 제시하고자 한다.

차세대 원전 대형 압력용기용 고강도 SA508 Gr.4N Ni-Cr-Mo계 저합금강 개발 (High Strength SA508 Gr.4N Ni-Cr-Mo Low Alloy Steels for Larger Pressure Vessels of the Advanced Nuclear Power Plant)

  • 김민철;박상규;이기형;이봉상
    • 한국압력기기공학회 논문집
    • /
    • 제10권1호
    • /
    • pp.100-106
    • /
    • 2014
  • There is a growing need to introduce advanced pressure vessel steels with higher strength and toughness for the optimizatiooCn of the design and construction of longer life and larger capacity nuclear power plants. SA508 Gr.4N Ni-Cr-Mo low alloy steels have superior strength and fracture toughness, compared to SA508 Gr.3 Mn-Mo-Ni low alloy steel. Therefore, the application of SA508 Gr.4N low alloy steel could be considered to satisfy the strength and toughness required in advanced nuclear power plants. The purpose of this study is to characterize the microstructure and mechanical properties of SA508 Gr.4N low alloy steels. 1 ton ingot of SA508 Gr.4N model alloy was fabricated by vacuum induction melting followed by forging, quenching, and tempering. The predominant microstructure of the SA508 Gr.4N model alloy is tempered martensite having small packet and fine Cr-rich carbides. The yield strength at room temperature was 540MPa, and it was decreased with an increase of test temperature while DSA phenomenon occurred at around $288^{\circ}C$. Overall transition property of SA508 Gr.4N model alloy was much better than SA508 Gr.3 low alloy steel. The index temperature, $T_{41J}$, of SA508 Gr.4N model alloy was $-132^{\circ}C$ in Charpy impact tests, and reference nil-ductility transition temperature, $RT_{NDT}$ of $-105^{\circ}C$ was obtained from drop weight tests. From the fracture toughness tests performed in accordance with the ASTM standard E1921 Master curve method, the reference temperature, $T_0$ was $-147^{\circ}C$, which was improved more than $60^{\circ}C$ compared to SA508 Gr.3 low alloy steels.

국내 공공정보시스템의 국제기술이전 사례연구 및 NTIS 제언 (A Case Study on International Technology Transfer of Korean Public Information Systems and Recommendations for NTIS)

  • 이은지;강인제;임철수;최기석;이병희
    • 한국콘텐츠학회논문지
    • /
    • 제16권10호
    • /
    • pp.533-545
    • /
    • 2016
  • 국제기술이전은 이해관계 불일치, 기술수준, 문화 등 여러 거시적 환경여건의 차이로 국내기술이전보다 더 어려운 점이 많은 것으로 알려져 있다. 본 연구에서는 정보마케팅의 관점에서 국내 공공정보시스템의 국제기술이전 사례연구를 통해 미래창조과학부 NTIS의 해외진출에 관해 제언하고자 한다. 국내 공공정보시스템 국제기술이전의 대표적 성공사례로 평가되는 관세청, 특허청, 조달청의 국제기술이전을 성공시키기 까지의 과정을 분석하여 국가과학기술지식정보서비스(NTIS)의 국제기술이전 촉진을 위한 정보마케팅 관점에서 사전준비전략을 제시한다.

점성토의 회복 및 영구변형 특성 평가 (Evaluation of the Resilient and Permanent Behaviors of Cohesive Soils)

  • 사공명;김대현;최찬용
    • 한국철도학회논문집
    • /
    • 제11권1호
    • /
    • pp.61-68
    • /
    • 2008
  • 교통하중이 작용하는 노반의 응력-변형율 간의 상관성의 특징을 나타내기 위하여 회복탄성계수가 사용되어왔다. 최근 도로의 경우 노반의 설계에 있어 AASHTO에서 제안된 역학적-경험적 설계가이드에 따라 회복탄성계소의 사용이 더욱 권장되는 실정이다. 이에 비해 국내 철도의 노반설계에 있어서는 정적실험 결과인 $K_{30}$이나 변형계수를 사용하고 있는 실정이다. 따라서 철도노반의 설계에 있어 회복탄성계수의 적용 가능성에 대한 평가가 이루어져야 할 것이다. 본 연구에서는 14종의 점성토 흙에 대하여 회복 및 영구변형 특성에 대한 평가를 위하여 기본 물성실험, 일축압축실험 그리고 회복탄성계수 실험을 수행하였다. 또한 일축압축 실험결과와 접선탄성계수, 일축압축강도, 파괴시 변형율 첨두 강도에서의 할선탄성계수와 항복변형율을 바탕으로 회복탄성계수 추정을 위한 예측모델이 제안되었다. 본 연구에서 제안된 예측모델은 실측결과와의 비교시 만족할 만한 값을 보이는 것으로 확인되었다. 다만 회복탄성계수 실험시 발생하는 영구변형에 대해서는 현재 고려하고 있지 않다.