• 한국응용곤충학회지
• /
• 제59권2호
• /
• pp.145-152
• /
• 2020

충남 금산지역 잎들깨 시설하우스에서 차먼지응애(Polyphagotarsonemus latus)는 5월 하순 최초 발생하기 시작하여 6월 중순에 1차 최대 발생양상을 보인 후 7월 상순부터 급격히 밀도가 증가하여 7월 중순 가장 밀도가 높은 2차 최대 발생양상을 보였다. 방제방법에 따라 발생양상에는 차이가 없었으나 밀도에는 차이를 보여 화학약제를 사용하는 하우스에서 가장 높았고 유기농업자재를 사용하는 하우스에서 가장 낮았다. 이는 크기가 작아 육안으로 관찰할 수 없는 차먼지응애를 방제하기 위해 화학약제를 사용할 경우, 농약 잔류 문제로 지속적인 사용을 못하므로 밀도가 높아지고, 유기농업자재를 사용하는 경우에서는 농약잔류에 대한 걱정 없이 유기농업자재를 지속적으로 사용함으로써 방제가 이루어졌던 것으로 판단된다. 잎들깨 주간내 발생양상을 조사한 결과, 차먼지응애는 접종 25일 후 최대 발생밀도를 보였고, 중엽, 성엽, 신초의 순으로 알과 약성충의 총밀도가 조사되었다. 그러나 엽장과 차먼지응애 밀도와의 상관성 분석 결과, 상관성이 없어 차먼지응애 발생예찰시 어떤 샘플을 채취해도 정확한 예찰이 이루어질 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• 자원환경지질
• /
• 제46권4호
• /
• pp.313-327
• /
• 2013

본 연구에서는 캐나다 아사바스카 지역의 맥머레이층에 대한 3차원 지구통계 모사를 실시하였으며 모사 결과를 바탕으로 심부지열회수방법을 통한 경제적 산출 가능 지역을 가늠하고자 하였다. 비투멘의 효율적인 생산을 위하여 SAGD 공법의 최적 입지를 선정하는데 있어 스팀챔버의 충분한 수직적 연장성을 확보하는 것은 중요한 사항이다. 연구지역에서 획득한 110개의 시추공 자료에 대하여 마르코프 전이 확률 기반의 분석을 실시하였으며 이를 바탕으로 맥머레이층 구성 암상에 대한 추계론적 예측을 실시하였다. 추계론적 모사를 통하여 획득한 다중재현을 기반으로 앙상블 확률 분포도를 제작하였으며 이는 각 암상이 분포 할 수 있는 포텐셜을 보여준다. 앙상블 확률 분포도를 이용하여 투수성 퇴적층(역질 퇴적층 및 사질 퇴적층)에 대한 누적 층후도를 구성하였으며 이를 바탕으로 SAGD 공법이 적용될 수 있는 최적 입지를 선정하였다. SAGD 최적 입지 선정을 위한 추가적인 분석을 실시하기 위하여 전이율을 바탕으로 한 단일 퇴적층의 평균적인 수직 및 수평적 연장성을 산정하였다. 투수성 퇴적층의 평균적인 수직적 연장성은 대체로 투수성 퇴적층에 대한 누적층후도 분포도와 유사한 분포 양상을 보이나 일부 누적 층후가 큰 위치에서 유사하지 않은 양상을 보인다. 이는 누적 층후도와 평균적인 수직적 연장성 분포 양상이 유사하지 않은 지역은 투수성 퇴적층과 다른 암상과의 교호성은 매우 크나 투수성 퇴적층의 수직적인 연장성은 좋지 않음을 의미한다. 따라서 누적층후도 뿐 만 아니라 투수성 퇴적층의 수직적 연장성 또한 충분히 고려하였을 때 건전한 SAGD 최적 입지를 선정하는데 충분히 신뢰성 있는 결론을 도출 할 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

• 대한간호학회지
• /
• 제28권4호
• /
• pp.958-969
• /
• 1998

In this study, we attempted to investigate the needs and problems of the terminal cancer patients and their family caregivers to provide them with nursing information to improve their quality of life and prepare for a peaceful death. Data was collected from August 1, 1995 to July 31, 1996 at the internal medicine unit of S hospital in Seoul area with the two groups of participants who were family members of terminal cancer patients seventy four of them were in-patients and 34 were out-patients who were discharged from the same hospital for home care. The research tool used in this study has been developed by selecting the questionnaires from various references, modifying them for our purpose and refining them based on the results of preliminary study. While general background information about the patients was obtained by reviewing their medical records, all other information was collected by interviewing the primary family caregivers of the patients using the questionnaire. The data collected were analyzed with the SPSS PC/sup +/ program. The results of this study are summarized as follows ; 1) Most frequently complained symptoms of the terminal cancer patients were in the order of pain(87%), weakness(86.1%), anorexia(83.3%) and fatigue (80.6%). 2) Main therapies for the terminal cancer patients were pain control (58.3%), hyperalimentation(47.2%) and antibiotics(21.3%). 3) Special medical devices that terminal cancer patients used most were oxygen device (11.1%), and feeding tube(5.6%). Other devices were used by less than 5% of the patients. 4) The mobility of 70.4% of the patients was worse than ECOG 3 level, they had to stay in bed more than 50% of a day. 5) Patients wanted their medical staffs to help relieve pain(45.4%), various physical symptoms(29.6%), and problems associated with their emotion(11.1%). 6) 16.7% of the family caregivers hoped for full recovery of the patients, refusing to admit the status of the patients. Also, 37% wished for the extension of the patient's life at least for 6 months. 7) Only 38.9% of the family members was preparing for the patient's funeral. 8) 45.4% of family caregivers prefer hospital as the place for the patient's death, 39.8% their own home, and 14.8% undetermined. 9) Caregivers of the patients were mostly close family members, i.e., spouse(62%), and sons and daughters or daughter-in-laws(21.3%). 10) 43.5% of the family caregivers were aware of hospice care. 46.8% of them learned about the hospice care from the mass media, 27.7% from health professionals, and the rest from books and other sources. 11) Caregivers were asked about the most difficult problems they encounter in home care, 41 of them pointed out the lack of health professionals they can contact, counsel and get help from in case of emergency, 17 identified the difficulty of finding appropriate transportation to hospital, and 13 stated the difficulty of admission in hospital as needed. 12) 93.6% of family caregivers demanded 24-hour hot line, 80% the visiting nurses and doctors, and 69.4% the volunteer's help. The above results indicate that terminal patients and their family caregivers demand help from qualified health professionals whenever necessary. Hospice care system led by well-trained medical and nursing staffs is one of the viable answers for such demands.

• Asia pacific journal of information systems
• /
• 제19권1호
• /
• pp.147-165
• /
• 2009

Virtual community(VC) will increasingly be organized as commercial enterprises, with the objective of earning an attractive financial return by providing members with valuable resources and environment. For example, Cyworld.com in Korea uses several community services to enable customers of Cyworld to take control of their own value as potential purchasers of products and services. Although initial adoption is important for online network service success, it does not necessarily result in the desired managerial performance unless the initial usage is continuously related to the continuous usage and purchase. Particularly, the customer who receives relevant online services and is well equipped with online network services, will trust the online service provider and perceive less risk and experience more activities such as continuous usage and purchase. Thus, how to promote continued online service usage or, alternatively, how to prevent discontinuance is a critical issue for VC service providers to consider. By aggregating a wide range of information and online environments for customers and providing trust to its members, the service providers of virtual communities help to reduce the perceived risk of continuous usage and purchase. Drill down, online service managers realize that achieving strong and sustained customers who continuously use online service and purchase on it is crucial. Therefore, the research into this online service continuance will identify the relationship between the initial usage and the continuous usage and purchase. The research of continuous usage or post adoption has recently emerged as an important issue in the IS literature. Individuals' information systems(IS) continuous usage decisions are congruent with consumers' repeat purchase decisions. The TAM(Technology Acceptance Model) paradigm has been strongly confirmed across a wide range from product purchase on EC to online service usage contexts. The analysis of IS usage based on TAM has proven to be successful across almost online service contexts. However, most of previous studies have focused on only an area (i.e., VC or EC). Just little research has tried to analyze the relationship between VC and EC. The effect of some factors on user intention, captured through several theories such as TAM, has been demonstrated. Yet, few studies have explored the salient relationships of VC users' EC acceptance. To fill this gap between VC and EC research, this paper attempts to develop a research model that extends the TAM perspective in view of the additional contributions of trust in the service provider and trust in members on some factors that affect EC and VC adoption. In this extension, we applied the TAM-to-TAM(T2T) model, and analyzed the transfer effect of trust between these two TAMs. The research model was empirically tested on the context of a social network service. The model was to extend TAM with the trust concept for the virtual community environment from the perspective of tasks. By building an extended model of TAM and examining the relationships between trust and the existing variables of TAM, it is aimed to explain a user's continuous intention to use VC and purchase on EC. The unit of analysis in this paper is an individual user of a virtual community. The population of interest is the individual with the experiences in virtual community. The data for this paper was made available via a Web survey of VC users. In total, 281 cases were gathered for about one week, but there were some missing values in the sample and there were some inappropriate cases. Thus, only 248 cases were finally analyzed. We chose the structural equation analysis to test the hypotheses and it is better suited for explaining complex relationships than the other methods. In this test, AMOS was used to test the Structural Equation Model (SEM). Noticeable results have been found in the T2T model regarding the factors affecting the intention to use of virtual community and loyalty. Our result showed that trust transfer plays a key role in forming the two adoption beliefs. Overall, this study preliminarily confirms the salience of trust transfer in online service.