• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.03a
• /
• pp.159-162
• /
• 1999

본 논문에서는 비선형 시계열 신호처리 및 분석을 위한 카오스 시뮬레이터에 대해서 소개한다. 이 시뮬레이터는 크게 세 개의모듈로 이루어져 있으며 신호발생 모듈, 신호처리 모듈, 신호분석 모듈로 나누어 진다. 이 카오스 시뮬레이터를 이용한 비선형 시계열 신호분석 결과 각각의 파라메터에 따른 신호분석이 가능함을 알 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.320-323
• /
• 2015

본 연구에서는 18 atoms unit cell graphene film을 기반으로 한 graphene/h-BN heterostructure의 bandgap 변화에 대해 EDISON LCAODFTLab simulator의 DFT기반 전자구조계산을 통해 알아보았다. Graphene 상에 BN-doping 형태로 주어진 여러 heterostructure의 전자구조계산을 통해 태양전지의 이론적 최적효율을 나타내는 1.2eV 정도의 값을 갖는 구조를 찾을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.201-203
• /
• 2006

This paper presents a graphical windows-based software for the education and training of the transmission network use of system charge. The developed simulator consist of the main module(MMI,GUI), the power flow module(PF), the power flow tracing module(PFT) and management of usage cost DB module(UCD). Each module has a separate graphical and interactive interfacing window. To have effective education for transmission network use of system charge, the developed simulator are provided with two power system analysis methods. Input data of power system can use the format of PSS/E input data. Also calculation of power flow tracing are provided with four methods such as "Felix Wu","Modified Felix Wu", "DCLF ICRP" and "Reverse MW mile". Results of calculation for usage cost are shown on the window through the table or chart. Therefore user can confirm the detailed differences of results from each calculation method.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2121-2127
• /
• 2014

Analyzing the observational data of volcanic activities around the northern part of Korean peninsula, the odds of volcano eruption increases continuously. For example, the cumulative seismic moment and frequence observed near Mt. Baekdu show a sudden increased values. In this study, predicting the diffusion of volcanic ash for two cases were carried out by using interactive realtime simulator, which was developed during last 2 years as a research and development project. The first case is Sakurajima volcano (VEI=3) erupted in August 2013. The second case is assumed as the volcanic eruption at Mt. Baekdu (VEI=7) under landing circumstance of typhoon Maemi (August 2003) in Korean peninsula. The synoptic condition and ash diffusion for the two cases were simulated by WRF(Weather Research and Forecast) model and Lagrangian dispersion model, respectively. Comparing the simulated result of the first case (i.e., Sakurajima volcano) with satellite image, the diffusion pattern show acceptable result. The interactive realtime simulator can be available to support decision making under volcanic disaster around East Asia by predicting several days of ash dispersion within several minutes with ordinary desktop personal computer.

• Journal of Computing Science and Engineering
• /
• v.2 no.4
• /
• pp.357-374
• /
• 2008

Over the past few decades, a considerable number of studies have been conducted on the technologies to build an UAV (Unmanned Aerial Vehicle) control system. Today, focus in research has moved from a standalone control system towards a network-centric control system for multiple UAV systems. Enabling the design of such complex systems in easily understandable forms that are amenable to rigorous analysis is a highly desirable goal. In this paper, we discuss our experimental evaluation of the Time-triggered Message-triggered Object (TMO) structuring scheme in the design of the UAV control system. The TMO scheme enables high-level structuring together with design-time guaranteeing of accurate timings of various critical control actions with significantly smaller efforts than those required when using lower-level structuring schemes based on direct programming of threads, UDP invocations, etc. Our system was validated by use of environment simulator developed based on an open source flight simulator named FlightGear. The TMO-structured UAV control software running on a small computing platform was easily connected to a simulator of the surroundings of the control system, i.e., the rest of the UAV and the flight environment. Positive experiences in both the TMO-structured design and the validation are discussed along with potentials for future expansion in this paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.58-67
• /
• 2005

To overcome limitations of test scope, schedule and cost, M&S(Modeling & Simulation) technique has been applied for T&E(Test and Evaluation) of the state-of-art weapon systems. This paper proposes an air defense simulation software framework to reduce both redundancy an[1 programming errors in system simulator. The proposed framework consists of a 'model' and a 'middleware' The 'middleware' is a reliable communication service layer that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP, UDP and etc. The main role of 'model' is to schedule and to run the real-time distributed simulation. The proposed framework has been applied to M-SAM(Middle range Surface to Air Missile) system simulator. The proposed framework's scheduling and communication performance results are satisfactory and were measured by hardwired NTP(Network Timer Protocol) time-stamp with GPS(Global Positioning System) timer for better precision.

• Asian Journal of Innovation and Policy
• /
• v.11 no.1
• /
• pp.110-147
• /
• 2022

Many megacities are exposed to natural hazards such as earthquakes, and when located in coastal regions, are also vulnerable to hurricanes and tsunamis. The physical infrastructures of transportation systems in megacities have become so complicated that very few organizations can understand their response to extreme events such as earthquakes and can effectively mitigate subsequent economic downfalls. The technological advances made in recent years to support these complex systems have not grown as fast as the rapid demand on these systems burdened by population shift toward megacities. The objective of this paper is to examine the risks imposed on and recoveries of transportation systems in megacities as the result of extreme events such as an earthquake. First, the physical damage to transportation infrastructure, loss of the transportation system performance, and the corresponding economic loss from disruptions to passenger and freight traffic is evaluated. Then, traffic flows are re-routed to reduce vehicles' delay due to earthquakes using a microscopic traffic flow simulator with an optimization model and macroscopic terminal simulator. Finally, the economic impact of the earthquake is estimated nationwide. Southern California is regarded as the region of study. The results demonstrate the effectiveness of the integrated model and provide what and how to prepare innovative resilience policies of urban infrastructure for a natural disaster occurrence.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1686-1697
• /
• 2022

As a part of probabilistic risk (or safety) assessment (PRA or PSA) of nuclear power plants (NPPs), the primary role of human reliability analysis (HRA) is to provide credible estimations of the human error probabilities (HEPs) of safety-critical tasks. Accordingly, HRA community has emphasized the accumulation of HRA data to support HRA practitioners for many decades. To this end, it is critical to resolve practical problems including (but not limited to): (1) how to collect HRA data from available information sources, and (2) how to inform HRA practitioners with the collected HRA data. In this regard, the U.S. Nuclear Regulatory Commission (NRC) and Korea Atomic Energy Research Institute (KAERI) independently initiated two large projects to accumulate HRA data by using full-scale simulators (i.e., simulator data). In terms of resolving the first practical problem, the NRC and KAERI developed two dedicated HRA data collection systems, SACADA (Scenario Authoring, Characterization, And Debriefing Application) and HuREX (Human Reliability data EXtraction), respectively. In addition, to inform HRA practitioners, the NRC and KAERI proposed several ideas to extract useful information from simulator data. This paper is the first of two papers to discuss the technical underpinnings of the development of the SACADA and HuREX systems.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.87-90
• /
• 2005

High-efficiency switched-mode circuits such as the class-E amplifier are well-known in the MHz frequency range. The class-E amplifier is a type of switching mode amplifier offering very high efficiency approaching 100%. In this paper of the class-E amplifier by using pHEMT device, the design has been done theoretically and experimentally, with simulation by using the harmonic balance method using circuit simulator. The amplifier using microstrip circuit and the pHEMT demonstrate 66% power-added- efficiency (PAE) at 2.4GHz with 17.6dBm of output power.

• Journal of Radiation Protection and Research
• /
• v.43 no.3
• /
• pp.114-119
• /
• 2018

Background: The retrospective dosimetry using RTL quartz can be improved by information for an optical sensitivity of sample connected with the equivalent dose determination. Materials and Methods: The quartz sample from a volcanic rock of Japan was used. After correcting the thermal quenching effect, RTL peaks of quartz were separated by the CGCD method cooperated with the general order kinetics. The number of overlapped glow peaks were ascertained by the $T_m-T_{stop}$ method. The optical sensitivity was examined by comparing the change of intensity on RTL glow peaks measured after exposure to light from a solar simulator with various illumination times. Results and Discussion: Seven glow peaks appeared to be overlapped on the RTL glow curve. The general order kinetics model was appropriate to separate glow peaks. After exposure to light from a solar simulator from a few minutes to 416 hr, the signals for peaks P4 and P5 decayed following the form of $f(t)=a_1e^{-{\lambda}1t}$, while the signals for peaks P6 and P7 decayed by the form of $f(t) = a_1e^{-{\lambda}1t}+a_2e^{-{\lambda}2t}+a_3e^{-{\lambda}3t}$. Conclusion: For dosimetric peaks, the times taken to reduce the RTL signal to half of its initial value were 70 sec for the peak P4, 54 s for the peak P5, 9,840 sec for the peak P6 and 26,580 sec for the peak P7, respectively. We conclude that the optical sensitivity of peaks P4, and P5 gives much higher than that of peaks P6 and P7.