• 센서학회지
• /
• 제4권1호
• /
• pp.51-63
• /
• 1995

Chemical bath deposition 방법으로 다결정 $CdS_{1-x}Se_{x}$ 박막을 세라믹 기판 위에 성장시킨 다음 온도를 변화시켜 열처리하고 X-선 회질 무늬를 측정하여 결정 구조를 밝혔다. $550^{\circ}C$로 열처리한 시료의 X-선 회절 무늬로부터 외삽법으로 구한 격자 상수는 CdS의 경우 $a_{0}=4.1364{\AA}$, $c_{0}=6.7129{\AA}$ 였으며 CdSe인 경우는 $a_{0}=4.3021{\AA}$, $c_{0}=7.0142{\AA}$ 였다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도 의존성을 연구하였다. 광전도 셀의 특성으로 스펙트럼 응답, 감도(${\gamma}$), 최대 허용 소비전격 및 응답시간을 측정하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.140-140
• /
• 2018

The 3D interconnect technologies have been appeared, as the density of Integrated Circuit (IC) devices increases. Through Silicon Via (TSV) process is an important technology in the 3D interconnect technologies. And the process is used to form a vertically electrical connection through silicon dies. This TSV process has some advantages that short length of interconnection, high interconnection density, low electrical resistance, and low power consumption. Because of these advantages, TSVs could improve the device performance higher. The fabrication process of TSV has several steps such as TSV etching, insulator deposition, seed layer deposition, metallization, planarization, and assembly. Among them, TSV metallization (i.e. TSV filling) was core process in the fabrication process of TSV because TSV metallization determines the performance and reliability of the TSV interconnect. TSVs were commonly filled with metals by using the simple electrochemical deposition method. However, since the aspect ratio of TSVs was become a higher, it was easy to occur voids and copper filling of TSVs became more difficult. Using some additives like an accelerator, suppressor and leveler for the void-free filling of TSVs, deposition rate of bottom could be fast whereas deposition of side walls could be inhibited. The suppressor was adsorbed surface of via easily because of its higher molecular weight than the accelerator. However, for high aspect ratio TSV fillers, the growth of the top of via can be accelerated because the suppressor is replaced by an accelerator. The substitution of the accelerator and the suppressor caused the side wall growth and defect generation. The suppressor was used as Single additive electrodeposition of TSV to overcome the constraints. At the electrochemical deposition of high aspect ratio of TSVs, the suppressor as single additive could effectively suppress the growth of the top surface and the void-free bottom-up filling became possible. Generally, copper was used to fill TSVs since its low resistivity could reduce the RC delay of the interconnection. However, because of the large Coefficients of Thermal Expansion (CTE) mismatch between silicon and copper, stress was induced to the silicon around the TSVs at the annealing process. The Keep Out Zone (KOZ), the stressed area in the silicon, could affect carrier mobility and could cause degradation of the device performance. Cobalt can be used as an alternative material because the CTE of cobalt was lower than that of copper. Therefore, using cobalt could reduce KOZ and improve device performance. In this study, high-aspect ratio TSVs were filled with cobalt using the electrochemical deposition. And the filling performance was enhanced by using the suppressor as single additive. Electrochemical analysis explains the effect of suppressor in the cobalt filling bath and the effect of filling behavior at condition such as current type was investigated.

• 센서학회지
• /
• 제4권3호
• /
• pp.60-70
• /
• 1995

Chemical bath deposition(C.B.D.)방법으로 다결정 $Cd_{1-x}Zn_{x}S$ 박막을 스라이드 유리(coming-2948) 기판위에 성장시켜 열처리하고 X-선 회절무늬를 측정하여 결정구조를 밝혔다. $550^{\circ}C$로 $N_{2}$ 속에서 열처리한 시료의 X-선 회절무늬로부터 외삽법으로 구한 격자상수는 CdS인 경우 $a_{0}\;=\;4.1364{\AA}$, $c_{0}\;=\;6.7129{\AA}$였으며 ZnS인 경우는 $a_{0}\;=\;3.8062{\AA}$, $c_{0}\;=\;6.2681{\AA}$였다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도 의존성을 연구하였다. 광전도 셀의 특성으로 스펙트럼응답 감도, 최대허용소비전력 및 응답시간을 측정하였다.

• Molecules and Cells
• /
• 제24권2호
• /
• pp.276-282
• /
• 2007

Protein phosphorylation is one of the major mechanisms by which eukaryotic cells transduce extracellular signals into intracellular responses. Calcium/calmodulin ($Ca^{2+}/CaM$)-dependent protein phosphorylation has been implicated in various cellular processes, yet little is known about $Ca^{2+}/CaM$-dependent protein kinases (CaMKs) in plants. From an Arabidopsis expression library screen using a horseradish peroxidase-conjugated soybean calmodulin isoform (SCaM-1) as a probe, we isolated a full-length cDNA clone that encodes AtCK (Arabidopsis thaliana calcium/calmodulin-dependent protein kinase). The predicted structure of AtCK contains a serine/threonine protein kinase catalytic domain followed by a putative calmodulin-binding domain and a putative $Ca^{2+}$-binding domain. Recombinant AtCK was expressed in E. coli and bound to calmodulin in a $Ca^{2+}$-dependent manner. The ability of CaM to bind to AtCK was confirmed by gel mobility shift and competition assays. AtCK exhibited its highest levels of autophosphorylation in the presence of 3 mM $Mn^{2+}$. The phosphorylation of myelin basic protein (MBP) by AtCK was enhanced when AtCK was under the control of calcium-bound CaM, as previously observed for other $Ca^{2+}/CaM$-dependent protein kinases. In contrast to maize and tobacco CCaMKs (calcium and $Ca^{2+}/CaM$-dependent protein kinase), increasing the concentration of calmodulin to more than $3{\mu}M$ suppressed the phosphorylation activity of AtCK. Taken together our results indicate that AtCK is a novel Arabidopsis $Ca^{2+}/CaM$-dependent protein kinase which is presumably involved in CaM-mediated signaling.

• 경영정보학연구
• /
• 제6권2호
• /
• pp.285-305
• /
• 2004

기업이 보유하고 있는 내부 정보를 언제 어디서나 직원들에게 제공할 수 있도록 지원해주는 모바일 컴퓨팅 환경은 업무 생산성을 향상시키고 효율성 증대를 가져다 주기 때문에 기업의 경쟁력을 높이기 위한 피할 수 없는 생존 도구가 되었다. 따라서 본 연구에서는 모바일 비즈니스 개념을 기반으로 무선 네트워크와 PDA를 활용하여 언제 어디서나 쉽고 편리하게 ERP정보를 실시간으로 처리할 수 있는 모형을 제 안하고, 그것의 활용을 통해 기업의 경쟁력을 향상시킬 수 있는 기본 틀을 마련하고자 하였다. 이를 위해 ERP시스템을 운영하고 있는 기업의 자재관리업무에 본 모형을 적용하여 "모바일을 활용한 자재관리시스템"을 구축하였다. 연구결과, 모바일을 기반으로 한 ERP시스템의 적절한 활용은 업무리드타임을 단축시키고 생산성의 극대화를 가져다주며, 사용의 편이성과 이동성 제공으로 인해 사용자 만족도 또한 향상시킬 수 있는것으로 나타났다. 본 연구의 결과는 시장의 변화와 고객의 요구에 대한 효과적인 대응뿐만 아니라 e-비즈니스 환경에 적합한 모델을 구축하기 위한 ERP전략 수립과 그 확장에 필요한 핵심 기반을 기업들에게 제공할 수 있을 것으로 보여진다.

• Radiation Oncology Journal
• /
• 제16권3호
• /
• pp.245-250
• /
• 1998

목적 : 조기 성문암의 방사선 치료 후 생존율, 실패 양상, 그리고 예후 인자에 대해 분석하였다. 대상 및 방법 : 1985년 6월부터 1992년 11월까지 방사선 치료를 위해 의뢰된 57례의 성문암환자를 대상으로 후향적 분석을 실시하였다. 연령 분포는 17세부터 71세까지 광범위했고 (중앙값 39세), 남자 55례와 여자 2례로 남성에서 호발하였다. 방사선 치료는 6 MV X-ray를 이용하여 1회 선량 2 Gy씩, 주 5회, 총선량 66 Gy를 조사하였다. 결과 : 방사선 치료에 대한 반응은 완전 관해 89.5% (51/57), 부분 관해 혹은 무반응 10.5%(6/57) 였다. 51례의 완전관해 환자 중에서 7례의 재발이 관찰되었고 7례 모두 수술로 구제되었다. 부분 관해 혹은 무반응 6례 중 4례에 대하여 구제수술을 시행하였고 2례에서는 수술을 시행하지 못하였다. 구제수술을 시행한 4례 중 3례가 구제되었고 1례는 다시 국소재발하였다. 3년 및 5년 무병생존율은 각각 72.9% 및 63.8%였다. 병소의 위치에 따른 5년 무병생존율은 후방인 경우 85.5%, 전방인 경우 61.6%였다 (P<0.05). 방사선치료에 대해 부분 관해 혹은 무반응을 보인 5례를 포함하여 13/57 (22.8%) 례의 치료 실패가 관찰되었고 그 중 10/13 (76.9%) 례가 수술로 구제되었다. 최종 5년 국소제어율은 92.3%였고 전체적으로 47/57 (82.5%) 례에서 음성을 보존할 수 있었다. 결론 : 높은 음성 보존율을 고려하면 초기 성문암에서 방사선치료가 우선적으로 고려되어야 한다.

• 정신신체의학
• /
• 제5권1호
• /
• pp.3-11
• /
• 1997

In becoming parents, the marital partners enter into a new developmental phase. The conception of the child is an act of mutual creativity during which the boundaries between the self and another were temporarily obliterated more completely than at any time since infancy. The infant is a physical fusion of the parents, and their personalities unite within the child. for many women, creativity as a mother becomes a central matter that provides meaning and balance to their lives. The husband usually has strong desires for an offspring and can be transformed by it. The child can profoundly affect one or both parents, and the influences are reciprocal-a child's needs or specific difficulties uncover a parent's inadequacy. following the child's development, each transition into a new developmental phase requires an adaptation by the parents, and one or another of these required adaptations may disturb a parent's equilibirium. And the personality changes, emotional difficulties, and regressions of a spouse that occur in response to some phase of parenthood can upset the marriage. Not only do children identify with parents, but parents also identify with their children. The parents take pleasure in child's joy and suffer with the child's pain more than in almost any other relationship. certain respects e parents lives again in the child. Through the process of identification the child can also provide one of the two parents with the opportunity to experience intimately the way in which a person of the opposite gender grows up. Parenthood also provides the opportunity to be loved, admired, and needed simply because one is a parent and, as such, a central and necessary object in the young child's life. The many potentialities for emotional satisfactions from parenthood manage to outweigh the tribulations and sacrifices that are required. The child also exerts an indirect effect through changing the parent's position in the society, for new sets of relationships are established as the parents are drawn to other couples with children of the same age, and for a new impetus toward economic and social mobility often possesses the parents. frequently the couple's relatedness to their own parents improves and grows firmer once again. Parenthood, the satisfactions it provides and the demands it makes, varies as life progresses : and changes with the parent's interests, needs, and age as well as with the children's maturation. There are phases in the child's life that the parents are reluctant to have pass, whereas they tolerate others largely through knowing that they will soon be over. The changing lives of the children provide many satisfactions that offset the tribulations, uncertainties, and regrets. The parents change. The young father, who was just starting on his carrier whom the first child was born, settles into a life pattern. He becomes secure with increasing achievement and interacts differently with the youngest child and provides a different model for him than for the oldest. The mother may have less time for a second or third child than for her first, but she may also be more assured in her handling of them. The birth of a baby when the parents art in their late thirties will find them Less capable of physical exertion with the child and less tolerant of annoyances, but they are less apt to be annoyed. Eventually the children min and leave home, but the couple do not cease to be parents.

• 한국ITS학회 논문지
• /
• 제19권5호
• /
• pp.40-51
• /
• 2020

2011년에 고속도로 정체 기준 속도가 개정된 후 많은 시간이 경과함에 따라 차량의 성능 개선, 경쟁 관계에 있는 고속열차 운행 확대, 고속도로 일부 구간의 제한속도 상향 등 다양한 고속도로 주행환경 변화가 발생하였고 고속도로 이용자의 이동 신속성에 대한 기대수준 또한 증가하는 추세이다. 따라서 본 연구에서는 설문조사를 통해 고속도로 이용자의 정체에 대한 인식을 조사하고, 고속도로 교통류 분석을 통해 고속도로 정체 기준 속도의 재설정을 검토하고자 한다. 설문조사 결과, 고속도로 이용자들이 인식하는 정체 기준 속도가 다소 높아진 것을 확인하였다. K-means 알고리즘을 통해 교통량 및 속도 자료를 분석한 결과, 서행과 정체의 분류 기준은 60km/h 수준인 것으로 나타났다. 또한 정체 기준 속도를 50km/h와 60km/h로 상향하는 것을 가정하여 고속도로 정체잦은구간을 산정해본 결과, 50km/h가 고속도로 이동성 관리를 위한 정체 기준 속도로 적절한 것으로 판단된다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.36-37
• /
• 1990

In the past, facile dissolution of cellulose has been hampered by the lack of suitable nondegrading solvents. Recently, this problem has been solved in our laboratory by the discovery of an inexpensive, convenient solvent system, that is the mixture of $NH_3\;and\;NH_4SCN$, for cellulose. Also, the $cellulose/NH_3/NH_4SCN$ solution system has been found to form the anisotropic, i.e., liquid crystalline phase. It is believed that both the cholesterio and the nematic phase occur. This finding has prompted extensive on-going researoh on the formation of the liquid crystalline phase from an inexpensive natural source such as cellulose since the nematic phase is envisioned as an excellent precursor sources for products with desirable properties, for example, high modulus and high strength. This interest naturally leads to a desire to understand the theological properties of the nematic phase so that the transformation of the nematic phase to the solid state with desirable properties can be efficiently accomplished, ;From this point of view, the theological behavior of the $cellulose/NH3_/NH_4SCN$ system has been studied as a function of shear rate and shear stress over a wide range of solvent compositions, cellulose concentration, centrifugation and urea contents, Results indicate that the viscosity decreases with increasing shear rate. A marked shear thinning behavior and a quasi-Newtonian behavior were observed in the low shear rate region and in the high shear rate region, respectively for all solvent compositions. The $cellulose/NH_3/NH_4SCN$ solution system only exhibited the viscosity increase with increasing cellulose concentration and failed to show the viscosity drop generally observed at the point of incipience of liquid crystal formation, This may be due to the gel-like nature of the solution by the association of the rodlike molecules into bundles which may serve as crosslinking points giving the cellulose solution a network structure. Also, simply hydrogen bonding may be so restrictive of molecular mobility that a viscosity drop is blocked. In addition to the above results, yield stress and thixotropy were also observed in the $cellulose/NH_3/NB_4SCN$ solution system which are characteristics of liquid crystal and gel, The results of the effect of centrifugation on viscosity show that viscosity decreases by the application of centrifugation. This may be explained by the change of the piled polydomain structure to the dispersed polydomain structure due to the pressure gradient generated during centrifugation.ation.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.214-218
• /
• 2020

In this study, Mg_xZn_1-xO thin films, which can be applied not only to active layers of light-emitting devices (LEDs), such as UV-LEDs, but also to solar cells, high mobility field-effect transistors, and power semiconductor devices, are fabricated using the sol-gel method. ZnO and Mg_0.3Zn_0.7O solution synthesized by the sol-gel method and the thin film were grown by spin coating on a Si (100) substrate and sapphire substrate. The solutions are synthesized by dissolving precursor materials in 2-methoxyethanol (2-ME) solvent, and then monoethanolamine (MEA) was added to the mixed solution as a sol stabilizer. Zinc acetate dihydrate is used as a ZnO precursor, while Mg nitrate hexahydrate and Mg acetate tetrahydrate are used as an MgO precursor. Then, the optical and structural characteristics of the fabricated thin films are compared. The molar concentration of the Zn precursor in the solvent is fixed at 0.3 M, and the amount of the Mg precursor is 30% of Mg²⁺/Zn²⁺. The optical characteristics are measured using an UV-vis spectrophotometer, and the transmittance of each wavelength is measured. Structural characteristics are measured using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Composition analyses are performed using energy dispersive X-ray spectroscopy (EDS). The Mg_0.3Zn_0.7O thin film was well formed at the ratio of the Mg precursor added regardless of the type of Mg precursor, and the c-axis of the thin film was decreased, while the band gap was increased to 3.56 eV.