• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.499-508
• /
• 2000

본 연구에서는 이종의 디지털 방사선사진술이 수복물의 방사선불투과성 비교에 적절하게 이용될 수 있는지의 여부를 평가하고, 이 기법을 이용하여 수종의 compomer 및 유동성 레진의 방사선불투과도를 측정, 비교하고자 하였다. Aluminum step wedge를 방사선사진촬영 하여 기 존의 transmission densitometer와 CD-Dent (phosphor scanning system) 및 RVG$^{(R)}$ (CCD system) 등 두 종류의 디지털 방사선사진술과의 광학밀도 상관관계를 평가하였고, 두께 2mm, 지름 5mm인 원형의 금속주형을 이용하여 Dyract$^{(R)}$ AP, Compoglass$^{(R)}$ 및 Dyract flow$^{(R)}$ 등 3종의 compomer와 Ultraseal-XT$^{(R)}$ plus$^{TM}$, Revolution$^{TM}$, Aeliteflo$^{TM}$ 및 Tetric-flow$^{(R)}$ 등 4종의 유동성 레진의 시편을 각각 5개씩 제작후 방사선불투과성을 측정하고 비교, 평가하여 다음과 같은 결과를 얻었다. 1. Aluminum step wedge를 사용한 광학밀도 측정곡선을 비교한 바, 통상적인 방사선사진술로 얻은 필름의 상에서 transmission densitometer로 방사선불투과도를 측정 한 곡선과 CD-Dent 및 RVG$^{(R)}$ 등 디지털 방사선사진술로 얻은 상에서 CADIA로 불투과도를 측정한 곡선들 사이에서 각각 매우 높은 역상관관계가 나타났다(${\gamma}$=-0.95, ${\gamma}$=-0.98 ; p<0.05). 2. 모든 수복채 공히 상아질과 유사하거나 높은 방사선불투과도를 나타내었고 (p<0.05), compomer인 Dyract$^{(R)}$ AP와 Compoglass$^{(R)}$, 그리고 유동성 레진인 Tetric-flow$^{(R)}$는 통상적인 방사선사진술 및 2종의 디지털 방사선사진술에서 공히 유동성 레진인 Revolution$^{TM}$과 Aeliteflo$^{TM}$, 그리고 상아질에 비해 유의하게 높은 방사선불투과도를 나타내었다 (p<0.05). 3. Compomer인 Dyract$^{(R)}$ AP와 Compoglass$^{(R)}$, 그리고 유동성 레진인 Tetric-flow$^{(R)}$는 통상적인 방사선사진술 및 CD-Dent 디지털 방사선사진술에서 공히 법랑질에 비해 높은 방사선불투과도를 나타내었고(p<0.05), compomer인 Dyract flow$^{(R)}$는 통상적인 방사선사진술에서만 법랑질에 비해 높은 방사선불투과도를 나타내었다(p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제29권4호
• /
• pp.365-369
• /
• 2004

The purpose of this study was to evaluate the apical sealing ability of Super-EBA, MTA and Dyract-flow as retrofilling materials. Forty-eight extracted human teeth with straight and single root canal were used in this study. The root canals were prepared to a #40 apical canal size and obturated with gutter-percha. Apicoectomies were performed and root end cavities were prepared to a depth of 3mm using an ultrasonic device. The root end cavities were filled with Super-EBA, MTA or Dyract-flow. Leakage was measured using an electrochemical technique for 4 weeks. According to this study, the results were as follows. 1. Increasing leakage with time was observed in all groups. 2. No significant difference was noted among the 3 groups with time (p =0.216). 3. No significant difference was noted among the 3 groups when measured within the same time interval (p =0.814). The results of this study suggest that the sealing ability of Dyract-flow is equal to that of Super-EBA and MTA, and Dyract-flow may be an alternative to other materials for root-end filling.

• 대한소아치과학회지
• /
• 제36권1호
• /
• pp.20-29
• /
• 2009

본 연구는 광중합 충전 재료의 적층 방법에 따른 중합수축 양상을 스트레인 게이지를 이용하여 측정하고, 이를 응력으로 환산하여 치면에 미치는 영향을 평가하였다. 발거된 영구치 70개의 치경부에 가로 3 mm, 세로 3 mm, 높이 1.5 mm의 와동을 형성하고, 일회 충전, 수평 적층법, 사면적층법으로 나누어 수복 재료를 충전하였다. Plasma arc lamp(PAL)를 사용한 고출력 광중합기를 광원으로 사용하였으며, 수복 재료는 Filtek $Z-250^{(R)}$ 복합레진, $Dyract^{(R)}$ AP 컴포머 그리고 $Tetric^{(R)}$ Flow 유동성 복합레진을 사용하였다. 중합과정동안 스트레인 게이지를 이용하여 치면에 발생된 스트레인을 측정하였고, 이를 응력으로 환산하여 다음과 같은 결론을 얻었다. 1. Strain 값은 광중합 개시와 함께 급격히 증가하였으며, 시간이 지남에 따라 서서히 감소하는 양상을 보여 주었다. 2. $Z-250^{(R)}$의 수축응력이 $Dyract^{(R)}$ AP와 $Tetric^{(R)}$ Flow에 비해 상대적으로 높게 나타났으나 통계학적 유의차는 없었다(p>0.05). 3. $Z-250^{(R)}$과 $Dyract^{(R)}$ AP에서 3가지 와동 충전 방법 간에는 수축응력의 차이가 없었다(p>0.05). 4. 와동 충전 방법에 따른 충전 재료 간에도 수축응력의 유의차는 없었다(p>0.05). 이상의 결과를 종합해보면 $Dyract^{(R)}$ AP는 광중합 과정과 자가 중합 과정이 함께 일어남으로 인해 $Z-250^{(R)}$보다 상대적으로 중합 수축이 적게 나타난 것으로 판단되었다. $Tetric^{(R)}$ Flow는 한 번에 충전을 완료할 수가 있어 시간 소모가 적고 치질에 대한 중합수축력도 적어 유치 와동 충전 시 유용한 충전 방법이라고 판단되었다. 향후 와동 충전 방법의 방향과 광중합 시간 간격이 광중합수축에 미치는 영향 등에 대한 추가 연구가 필요하다고 사료되었다.

• Imaging Science in Dentistry
• /
• 제30권4호
• /
• pp.243-248
• /
• 2000

Purpose: The aim of this study was to determine the relative radiopacities of cavity lining materials (Resin-modified Glass Ionomer cement, Compomer and Plowable resin) for posterior composite resin restoration. Material & Methods: Resin-modified glass ionomer cement (Fuji II LC, Vitrebond/sup TM/), Compomers (Dyract /sup (R)/ Compoglass, F2,000, Dyract/sup (R)/ flow Compoglass Flow) and Flowable resins (Tetric/sup (R)/ flow, Aeliteflo/sup TM/ Revolution/sup TM/) were used. Five specimens of 5 mm in diameter and 2 mm thick were fabricated with each material. Human molars were horizontally sectioned 2 mm thick to include both enamel and dentin. The radiopacities of enamel, dentin, cavity lining materials, aluminum step wedge were obtainded from conventional radiograph and NIH image program. Results: All the tested lining materials showed levels of radiopacity the same as or greater than that of dentin. All compomer tested (Dyract, Compoglass, F2,000, Dyract flow, Compoglass Flow) and Vitrebond/sup TM/, Tetric/sup (R)/ flow were more radiopaque than enamel. The radiopacities of Fuji II LC and Revolution/sup TM/ were between enamel and dentin and resin-modified glass ionomer cement, Compomer and Tetric/sup (R)/ flow were greater than those of Revolution/sup TM/, Aeliteflo/sup TM/ or dentin. The level of radiopacity of the tested materials was variable; those with low radiopacity should be avoided in class II restorations, where a clear determination of recurrent caries by the examining clinician could be compromised. Conclusion: Clinician should be able to distinguish these cavity lining materials radiographically from recurrent decay, voids, gaps, or other defects that lead to clinical failure. Utilization of materials ranked more radiopaque than enamel would enable clinicians to distinguish the lining material from tooth structure.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.502-514
• /
• 2002

The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.

• Restorative Dentistry and Endodontics
• /
• 제43권3호
• /
• pp.24.1-24.12
• /
• 2018

Objectives: The aim of this in vitro study was to evaluate the biocompatibility of newly proposed root-end filling materials, Biodentine, Micro-Mega mineral trioxide aggregate (MM-MTA), polymethylmethacrylate (PMMA) bone cement, and Smart Dentin Replacement (SDR), in comparison with contemporary root-end filling materials, intermediate restorative material (IRM), Dyract compomer, ProRoot MTA (PMTA), and Vitrebond, using human periodontal ligament (hPDL) fibroblasts. Materials and Methods: Ten discs from each material were fabricated in sterile Teflon molds and 24-hour eluates were obtained from each root-end filling material in cell culture media after 1- or 3-day setting. hPDL fibroblasts were plated at a density of $5{\times}10^3/well$, and were incubated for 24 hours with 1:1, 1:2, 1:4, and 1:8 dilutions of eluates. Cell viability was evaluated by XTT assay. Data was statistically analysed. Apoptotic/necrotic activity of PDL cells exposed to material eluates was established by flow cytometry. Results: The Vitrebond and IRM were significantly more cytotoxic than the other root-end filling materials (p < 0.05). Those cells exposed to the Biodentine and Dyract compomer eluates showed the highest survival rates (p < 0.05), while the PMTA, MM-MTA, SDR, and PMMA groups exhibited similar cell viabilities. Three-day samples were more cytotoxic than 1-day samples (p < 0.05). Eluates from the cements at 1:1 dilution were significantly more cytotoxic (p < 0.05). Vitrebond induced cell necrosis as indicated by flow cytometry. Conclusions: This in vitro study demonstrated that Biodentine and Compomer were more biocompatible than the other root-end filling materials. Vitrebond eluate caused necrotic cell death.

• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.16-22
• /
• 2001

The purpose of this study was to evaluate the marginal microleakage of condensable composite resin restorations according to flowable resin lining of internal cavity wall. The eighty extracted human molar teeth without caries and/or restorations are used The experimental teeth were randomly assigned into four groups of ten teeth each. Eighty caries-free extracted human molars were used in this study. The conventional class II cavities (box-shaped on mesial and distal surface, faciolingual width : 3mm, gingival wall depth : 1.5mm) were prepared 1mm below cementoenamel junction with a # 701 carbide bur. The teeth were divided into four groups, and then each group were subdivided into A & B group according to flowable resin & compomer lining ; Group 1-A : Tetric Ceram filling, Group 1-B : Tetric Flow lining and Tetric Ceram filling, Group 2-A Ariston pHc filling, Group 2-B : Tetric Flow lining and Ariston pHc filing, Group 3-A SureFil filling, Group 3-B : Dyract Flow lining and SureFil filling, Group 4-A : Pyramid filling, Group 4-B : Aeliteflo lining and Pyramid filling. To simulate as closely as possible the clinical situation during retoration placement, a "restoration template" was fabricated, and the condensable resin was filled using a three-sited light-curing incremental technique. All the materials used were applied according to the manufacturers' instructions. The specimens were stored in the 100% humidity for 7 days prior to thermocycling (100 thermal cycles of 5~55$^{\circ}C$ water with a 30-second dwell time) The specimens were immersed in 2% metyleneblue dye for 24 hours, and then embedded in transparent acrylic resin and sectioned mesiodistally with diamond wheel saw. The degree of marginal leakage was scored under stereomicroscope ($\times$20) and the data were analyzed by Kruskal-Wallis test and Wilcoxon signed ranks test. The results were as follows : 1. In the gingival margins of all the group, microleakage of subgroup B was less than subgroup A. 2. In the group 1, 2, 4, there was significant differences between subgroup A and B (p<0.05), but in the group 3, there was not significant different between group 3-A (SureFil) and group 3-B (Dyract flow/SureFil) (p>0.05). 3. In the subgroup A and B, there was significant different between all group except group 4 of subgroup A. From the results above, it was suggested that the cavity lining of flowable resin and flowable compomer in condensable resin restoration decrease microleakage at gingival margin, and does improve their ability to seal the gingival margin of class II preparation.

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.418-426
• /
• 2008

본 연구에서는 구강 환경과 유사한 조건에서 불소방출성을 보이는 콤포짓트 레진계 수복재의 내구성과 불소방출성을 조사하기 위해 4 종의 콤포머와 1 종의 불소방출성 콤포짓트 레진을 실험재료로 선택하고 $5^{\circ}C$와 $55^{\circ}C$ 수중에서의 열순환 처리 후의 인장강도, 열순환 처리 후 칫솔에 대한 작용력 1.5N으로 100,000회 칫솔질을 시행하였을 때의 표면조도 및 불소치약 칫솔질 후 $37^{\circ}C$ 수중에서의 불소이온 용출 양상을 조사한 결과 다음과 같은 결론을 얻었다. 1. 인장강도는 TC($Tetric^{(R)}$ Ceram)군에서 32.3 MPa, CF(Compoglass F)군에서 16.8 MPa이고, TC군과 DF($Dyract^{(R)}$ flow)군 및 CF군에서 유의한 차이를 보였다(P<0.05). 2. 칫솔질 마모시험 후의 표면조도 Ra는 TC군에서 0.287, FT(F2000)군에서 1.516이고, FT군과 나머지 시험군 사이에 유의한 차이를 보였다(P<0.05). 3. 칫솔질 마모시험 후의 표면에서는 필러의 돌출과 탈락 양상이 관찰되었다. 4. 불소치약 Perio Alpine Herb로 칫솔질 한 후 콤포머는 초기에 높은 용출을 보인 후 시간이 경과하면서 용출량이 감소하는 양상을 보였지만, 불소방출성 콤포짓트 레진의 TC군에서는 초기단계부터 낮으면서도 지속적인 용출을 보였다. 5. 불소치약 Perio Alpine Herb로 칫솔질 한 후 1시간이 경과하였을 때의 불소이온 용출량은 CF군에서 $2.064{\mu}g/cm^2$, TC 군에서 $0.1119{\mu}g/cm^2$이고, CF군의 용출량이 나머지 시험군에 비해 유의하게 높은 값을 보였다(P<0.05).

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.127-133
• /
• 2001

There are several factors affecting the effectiveness of polymerization of the esthetic restorative materials. Among those factors, the initiator. camphoroquinone has the unique characteristic. of which the light sensitivity is very dependent on the wavelength of blue light. Camphoroquinone shows the most light absorption ability in the wavelength range of 470nm. So most of clinically used light curing systems adopt this phenomenon as their polymerization mechanism. The most popular way of light curing system is standard 40 second curing. But the problem of standard curing technique shows the rapid increase of resin viscosity followed by the acceleration of polymerization and the limited resin flow, resulted in reduction of the physicalproperty of restoration by retained stress. The object of this study was to verify the effects of narrow-banded wavelength on the microhardness of the esthetic restorative materials. a composite resin and a compomer, using filters which have peak wave length of 430nm, 450nm, 470nm, respectively. The results were as follows: 1. All the experimental groups showed lower hardness value than the control group. 2. In DyractAP, the hardness value by wavelength showed the same changing pattern on both upper and lower surfaces. 3. In DenFil, the hardness value by wavelength showed different changing pattern on upper and lower surfaces. 4. The hardness ratio showed similar pattern to the hardness variation of lower surface. but there was no significant difference between measurement in 10 minutes and 3 days later, besides the increase of hardness value.

• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.229-237
• /
• 2003

본 연구는 기존의 할로겐광(XL 3000, 3M, U.S.A.)과 비교하여 새로운 중합광원인 플라즈마광(Flipo, LOKKI, France)과 Light Emitting Diode(이하 LED, Elipar Free light, 3M, U.S.A.)광의 효율성을 평가할 목적으로 시도되었다. 이에 본 연구에서는 첫째, 일정 광도 하에서 플라즈마광과 LED광의 중합시간에 따른 중합도의 변화를 검토하여 할로겐광의 미세경도와 유사한 광조사 시간을 알아보고, 둘째, 중합반경에 따라 균일한 중합이 이루어지는지를 보기 위해 광조사 부위의 중심부와 외측 변연부에서의 중합도의 차이를 비교하였다. 2mm 두께의 복합레진 시편의 상면과 하면의 미세경도의 측정을 통해 중합도를 평가, 비교해 본 결과 다음과 같은 결론을 얻었다. 1. Z-100의 미세경도 측정치 비교에서, 대조군인 할로겐광을 40초 적용한 경우는, 플라즈마광 6-9초, LED광 40-60초를 적용한 경우와 유사하였다(P>0.05). 2. Tetric Flow의 미세경도에서는 대조군인 할로겐광을 40초 적용한 경우, 플라즈마광 9초, LED광 40-60초를 적용한 경우와 유사하였다(P>0.05). 3. Dyract AP의 경우, 할로겐광 40초를 조사한 것은, 플라즈마광 6-9초, LED광 20-40초를 적용한 경우와 유사하게 나타났다(P>0.05). 4. Fuji II LC에서는 할로겐광을 40초 적용한 경우가, 플라즈마광 9초, LED광 20-60초를 적용한 경우와 유사하게 나타났다(P>0.05). 5. Fuji II LC를 제외한 모든 시료에서 할로겐, 플라즈마, LED광 모두 시편의 중앙에서 외측으로 갈수록 미세경도는 유의하게 감소되었다(p<0.05).