• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.470-477
• /
• 1990

Singh's multi-level method is extended to the optimal tracking control of a large interconnected dynamical system which has coupled states and coupled inputs. The steady-state tracking error and a convergence condition for the extended multi-level method are derived analytically and the results show that the steady-state tracking error and a convergence rate have to be compromised. Also, a new multi-level method which is advantageous over the Singh's method in steady-state tracking error and computational burden is proposed by introducing nominal inputs into the performance index. The resulting feedback gain matrix and the compensation vector are optimal for all initial conditions so that eventual on-line computation is minimal.

• 천문학회보
• /
• 제39권2호
• /
• pp.83.1-83.1
• /
• 2014

Kepler-47 is the first multi-body circumbinary planetary system detected by the Kepler space telescope. The two planets were detected by the transit method. In the discovery paper the authors report about the presence of an additional transit-like signal in their dataset which cannot be explained by a four-body (binary + 2 planets) system. Therefore it is likely that the unexplained signal could be due to a third planet. In this talk I will present recent results from a dynamical investigation of the five-body system (binary + 3 planets). We have applied the MEGNO technique to detect regions of quasi- or near quasi-periodic orbits of a hypothetical third planet. Quasi-periodic regions exists for a third planet and the long-term stability has been tested. Although the existence of a third planet is most likely to be confirmed from transit photometry we calculate transit-timing variation (TTV) signals due to the third planet which also can be used to infer its presence.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.42-47
• /
• 2018

This paper describes the dynamical behavior of the bicycle and its nonlinear effect when magnetic repulsive forces are applied to the bicycle cushion system. A finite-element method was used to obtain its reliabilities by comparing the experimental and numerical values and select the proper magnet sizes. The Equivalent spring stiffness values were evaluated in terms of both linear and nonlinear approximations, where the nonlinear effect was specifically investigated for the ride comfort. The corresponding equations of linear and nonlinear motion were derived for the numerical model with three degrees of freedom. Dynamic behaviors were observed when the bicycle ran over a curvilinear road in the form of a sinusoidal curve. The analysis in this paper for the observed nonlinearity of magnetic repulsive forces will be a useful guide to more accurately predict the cushion design for any vehicle system.

• 천문학회보
• /
• 제39권1호
• /
• pp.81.1-81.1
• /
• 2014

Kepler-47 is the first multi-body circumbinary planetary system detected by the Kepler space telescope. The two planets were detected by the transit method. In the discovery paper the authors report about the presence of an additional transit-like signal in their dataset which cannot be explained by a four-body (binary + 2 planets) system. Therefore it is likely that the unexplained signal could be due to a third planet. In this talk I will present recent results from a dynamical investigation of the five-body system (binary + 3 planets). We have applied the MEGNO technique to detect regions of quasi- or near quasi-periodic orbits of a hypothetical third planet. Quasi-periodic regions exists for a third planet and the long-term stability has been tested. Although the existence of a third planet is most likely to be confirmed from transit photometry we calculate transit-timing variation (TTV) signals due to the third planet which also can be used to infer its presence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.67-71
• /
• 2002

In this paper, we propose a new deformable model based on non-linear elasticity, anisotropic behavior and the finite element method and developed the high-speed controller for haptic control. The proposed controller is based on the PCI/FPGA technology, which can calculate the real position and transmit the force data to device rapidly, The haptic system is composed of 6DOF force display device, high-speed controller and HIR library for 3D graphic deformation algorithm & haptic rendering algorithm. The developed system will be used on constructing the dynamical virtual environment. we demonstrate the relevance of this approach for the real-time simulating deformations of elastic objects. To show the efficiency of our system, we designed simulation program of force-reflecting, As the result of the experiment, we found that the controller has much higher resolution than some other controllers.

• Structural Engineering and Mechanics
• /
• 제60권5호
• /
• pp.891-902
• /
• 2016

The beam structure with breathing cracks subjected to harmonic excitations was modeled by FEM based on Euler-Bernoulli theory, and a piecewise dynamical system was deduced. The precise integration method (PIM) was employed to propose an algorithm for analyzing the dynamic responses of the deduced system. This system was first divided into linear sub-systems, between which there are switching points resulted from the breathing cracks. The inhomogeneous terms due to the external excitations were tackled by introducing auxiliary variables to express the harmonic functions, hence the sub-systems are homogeneous. The PIM was then applied to solve the homogeneous sub-systems one by one. During the procedures, a predictor-corrector algorithm was presented to determine the switching points accurately. The presented method can provide solutions with an accuracy to a magnitude of $10^{-12}$ compared with exact solutions obtained by the theories of ordinary differential equations. The PIM results are much more accurate than Newmark ones with the same time step. Moreover, it is found that the PIM can maintain a high level of accuracy even when the time step increases within a relatively wide range.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.21-29
• /
• 1994

This paper presents a method to accommodate failures that affect aircraft dynamical characteristics, especially control surface jams on a large transport aircraft. The approach is to use the slow effectors, such as the stabilators or engines, in the feedforward manner. The simulation results indicate the performance of the RFCS. In some cases of control surface jam, the aircraft cannot recover without using the stabilators. Although the inputs to the slow effectors are determined using the nominal parameters, the effects of parameter change can be compensated by adjusting the control parameters for the fast surfaces. In the case of rudder jam, if the remaining control surfaces and the differential thrust cancel the moments produced by the stuck rudder, using the engine control improves time responses and reduces deflection angles of the control surfaces. If not, however, the aircraft starts a large rolling motion following a yawing motion. In that case, the stabilators should be used to damp the induced rolliig motion, instead of trying to directly cancel the moments caused by the stuck rudder. Unfortunately, the proposed control law for the stabilators does not give such inputs, because it does not take into account the dynamical effects which stuck surfaces have on the aircraft motions. However, we have shown through simulation that the aircraft can be recovered by giving the stabilators the control inputs that counteract the induced rolling moment. Besides, the method has also been shown through simulation to be effective in maintaining control during a situation similar to an actual accident. Finally let us mention a problem with the RFCS. As stated above, we have not established a method to select a trim point which call be reached as easily as possible using the remaining control effectors. In fact, recovery performance considerably depends on the trim states. As pointed out in Ref. 11, finding the best trim point for impaired aircraft will be one of the most difficult questions in RFCS design.

• 한국지능시스템학회논문지
• /
• 제15권3호
• /
• pp.318-323
• /
• 2005

본 논문에서는 불확실성을 포함한 연속시간 비선형 동적 시스템에 대한 퍼지 모델 기반 제어기의 지능형 디지털 재설계를 위한 조직적인 방법을 제안한다. 불확실 비선형 시스템을 표현하기 위해 연속시간 불확실 TS 퍼지 모델이 구성된다. 그리고, 안정화와 추적을 위한 퍼지 모델 기반 제어기 설계를 위해 PDC 기법이 이용된다. 마지막으로, 설계된 연속시간 제어기는 지능형 디지털 재설계 기법을 이용함으로써 이산시간 제어기로 전환됨을 증명하는 방법을 제안한다. 이 새로운 설계 기법은 퍼지 모델 기반 제어 이론과 불확실성을 가진 비선형 동적 시스템에 대한 진보된 디지털 재설계 기법의 통합을 위한 조직적이고, 효과적인 틀을 제공한다 마지막으로, 단일 링크 유연 로봇 시스템의 모의 실험을 이용해 개발된 설계 방법의 효용성과 실행 가능성을 입증한다.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2011년도 학술발표회
• /
• pp.20-27
• /
• 2011

A system for fine-resolution long-range weather forecast is introduced in this study. The system is basically consisted of a global-scale coupled general circulation model (CGCM) and Weather Research and Forecast (WRF) regional model. The system makes use of a data assimilation method in order to reduce the initial shock or drift that occurs at the beginning of coupling due to imbalance between model dynamics and observed initial condition. The long-range predictions are produced in the system based on a non-linear ensemble method. At the same time, the model bias are eliminated by estimating the difference between hindcast model climate and observation. In this research, the predictability of the forecast system is studied, and it is illustrated that the system can be effectively used for the high resolution long-term weather prediction. Also, using the system, fine-resolution climatological data has been produced with high degree of accuracy. It is proved that the production of agrometeorological variables that are not intensively observed are also possible.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2102-2107
• /
• 2005

In this paper, a real-time optimization method for nonlinear dynamical systems is proposed. The proposed method is based on the algorithms of numerical solutions for optimal control problems. We deal with a real-time collision-free motion control of a nonholonomic mobile robot, which has input restrictions of actuators. The effectiveness of the algorithmic method is demonstrated through numerical and experimental results. The mobile robot which we have developed is able to avoid moving obstacles skillfully. Therefore the proposed controller works well in real time.