• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.343-347
• /
• 2008

Wakeup schemes that turn off sensors' radio when communication is not necessary have great potential in energy saving. At the start of each beacon interval in the IEEE 802.11 power saving mode specified for DCF, each node periodically wakes up for duration called the ATIM Window. However, in the power saving mechanism specified in IEEE 802.11, all nodes use the same ATIM window size. Since the ATIM window size critically affects throughput and energy consumption, a fixed ATIM window does not perform well in all situations. This paper proposes an adaptive mechanism to dynamically choose an ATIM window size according to network condition. Simulation results show that the proposed scheme outperforms the IEEE 802.11 power saving mechanism in terms of the amount of power consumed and the packet delivery ratio.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.79-86
• /
• 2009

The purpose of this paper is to analyze the 24 mail center's efficiency and productivity changes from first quarter to fourth quarter of 2008 using window analysis and Malmquist productivity index. Row views of window analysis results make it possible to determine trends and/or observed behavior with the same data set, and column views to examine the stability of results across different data sets. Malmquist productivity indexes greater than unity translate into improvements in productivity, and less than unity mean deterioration in performance over time. The results of this study suggest that DEA models under dynamic situations such as window analysis and Malmquist productivity index enable us to comprehend the efficiency and productivity changes over time and to show the direction of improvements.

• Journal of KSNVE
• /
• v.1 no.1
• /
• pp.45-52
• /
• 1991

The dynamic properties of primary-secondary structural systems are examined using analytical expressions for the modal properties. The analysis begins with a Lagrange multiplier formulation to develop a characteristic equation in terms of primary system mobilities and secondary system impedances. The complexity of the characteristic equation by developing new method, frequency window method. It is shown that the reduction of complexity can only be obtained by a reduction of accuracy, but by retaining the dominant effects of the dynamics problem, the loss of accuracy is not excessive. The reduced problem is examined further to develop simple expressions for the modal properties which provide insight into the resonance characteristics of the primary-secondary system problem. The results are useful as a complement to existing computational techniques for understanding and interpreting dynamic analysis results.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.518-521
• /
• 2007

To retrieve Sea Surface Temperature(SST) from NOAA-AVHRR imagery the spilt window atmospheric correction algorithm is generally used. Recently, there have been various new algorithms developed to process these data, namely the variable-coefficient split-window, the R54 transmittance-ratio method, fixed-coefficient nonlinear algorithm, dynamic water vapour (DWV) correction method, Dynamic Water Vapour and Temperature algorithm (DWVT). We used MCSST (Multi-Channel Sea surface temperature) and NLSST(Non linear sea surface temperature) algorithms in this study. The study area is around the Korea sea area (Yellow Sea). We compared and analyzed with various methods by applying each Ocean in-situ data and satellite data. The primary aim of study is to verify and optimize algorithms. Finally, this study proposes an optimized algorithm for SST retrieval.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.291-296
• /
• 2007

This study presents the evaluation process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of 6x6 array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1093-1101
• /
• 2007

This study presents the design improvement process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of $6{\times}6$ array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1075-1082
• /
• 2004

Wireless LAN is a rather mature communication technology connecting mobile terminals. IEEE 802.11 is a representative protocol among Wireless LAN technologies. The basic medium access control (MAC) mechanism of IEEE 802.11 is called distnbuted coordination function (DCF). DCF shows poor throughput and high drop rate as the number of stations and offered traffic load increase. In this paper we propose an effective mechanism using dynamic mimmum contention window(CWmin) in wireless LAN~ and show that performance improves via simulations. Proposed dynamic CWmin scheme exhibits superior performance as the number of stations and offered load grow. As, our proposed scheme is expected to be more effective in highly densed wireless LAN environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.60-67
• /
• 2014

This paper considers an inbound ordering and outbound dispatching problem for multi-products and multi-vehicles in a third-party distribution center. The demands are dynamic over a discrete and finite time horizon, and replenishing orders are shipped in various transportation modes and the freight cost is proportional to the number of vehicles used. Any mixture of products is loaded onto any type of vehicles. The objective of the study is to simultaneously determine the inbound lot-sizes, the outbound dispatching sizes, and the types and numbers of vehicles used to minimize total costs, which consist of inventory holding cost and freight cost. Delivery time window is one of the general dispatching policies between a third-party distribution center and customers in practice. In the policy, each demand of product for a customer must be delivered within the time window without penalty cost. We derive mixed integer programming models for the dispatching policy with delivery time windows and on-time delivery dispatching policy, respectively and analyze the effect on a dispatching policy with delivery time windows by comparing with on-time delivery dispatching policy using various computational experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.4
• /
• pp.285-294
• /
• 2007

In this paper, we investigate a novel online estimation algorithm for dynamic Bayesian network(DBN) parameters, given as conditional probabilities. We sequentially update the parameter adjustment rule based on observation data. We apply our algorithm to two well known representations of DBNs: to a first-order Markov Chain(MC) model and to a Hidden Markov Model(HMM). A sliding window allows efficient adaptive computation in real time. We also examine the stochastic convergence and stability of the learning algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.101-109
• /
• 2004

Image enhancement for Infrared imaging system is mainly based on the global histogram equalization. The global histogram equalization(GHE) is a method in which each pixel is equalized by using a whole histogram of an image. GHE is speedy and effective for real-time imaging system but its method fails to enhance the fine details. On the other hand, the basic local histogram equalization(LHE) method uses sliding a window and. the pixels under the window region are equalized over the whole output dynamic range. The LHE is adequate to enhance the fine details. But this method is computationally slow and noises are over-enhanced. So various local histogram equalization methods have been already presented to overcome these problems of LHE. In this paper, a new regional dynamic range histogram equalization (RDRHE) is presented. RDRHE improves the equalization quality while reducing the computational burden.