• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.121-127
• /
• 2020

In this paper, we propose a dynamic spectrum hole grouping method that changes the grouping range of spectrum hole according to the resources amount required by secondary users in wideband spectrum cognitive wireless networks, and then the proposed method is applied to channel allocation for the secondary user service. The proposed method can improve waste of resources in the existing static spectrum hole grouping in virtue of grouping dynamically as much the predicted spectrum holes resources as secondary users require. Simulation results show that channel allocation method with the proposed dynamic grouping outperforms that with the static grouping method in resources utilization under acceptable secondary user service performance.

• The KIPS Transactions:PartC
• /
• v.16C no.4
• /
• pp.477-486
• /
• 2009

This paper proposes a dynamic bandwidth allocation (DBA) algorithm with adaptive maximum transmission window (DBA-AMTW) to increase channel utilization in Ethernet passive optical networks (EPONs). A polling mechanism in EPON determines channel utilization and puts constraints on DBA algorithm and scheduling. DBA algorithms based on interleaved polling with stop (IPS) allocate transmission windows to optical network units (ONU) considering requests of all ONUs. However channel idle time when any ONU does not transmit packets decreases channel utilization. Proposed DBA-AMTW improves efficiency of a network and allocates transmission windows effectively by appropriate DBA computation from REPORT messages of all ONUs. An adaptive maximum transmission window for each ONU determined by a DBA computation in the previous scheduling cycle. Simulation results show that the proposed DBA algorithm improves performance of throughput and average delay time.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2336-2347
• /
• 2018

The azeotrope of methyl acetate methanol and water was isolated using extractive distillation with water as entrainer. The pressure-swing extractive distillation (PSED) process and vapor side-stream distillation column (VSDC) with the rectifier process were designed to separate the methyl acetate, methanol and water mixture. It was revealed that the VSDC with the rectifier process had a reduction in energy consumption than the PSED process. Four control schemes of the two process were investigated: Double temperature control scheme (CS1), $Q_R/F$ feedforward control of reboiler duty scheme for PESD (CS2), $Q_R/F$ feedback control scheme for VSDC (CS3), the feedback control scheme of sensitive plate temperature of side-drawing distillation column to dominate the compressor shaft speed (CS4). Feed flow and composition disturbance were used to evaluate the dynamic performance. As a result, CS4 is a preferable choice for separation of methyl acetate-methanol-water mixture. A control scheme combining the operating parameters of dynamic equipment with the control indicators of static equipment was proposed in this paper. It means using the sensitive plate temperature of side-drawing column to control the compressor shaft speed. This is a new control scheme for extractive distillation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.115-122
• /
• 2021

In this paper, we propose a dynamic slot allocation scheme to improve the slot utilization rate in tactical multi-hop networks in which the channel condition varies due to node movements. The proposed scheme takes advantage of the fact that nodes that are more than three hops apart can use the same slot simultaneously. The frame is divided into two parts: the control period and the data period. To know the available slot information within two-hop distance, the node exchanges a slot allocation information with one-hop neighbors during the control period. The node can get the information on idle slots that are not used within two-hop distance but assigned already to other nodes that are more than three-hop away. The identified idle slot can be used by the node, which increases the slot utilization rate. The performance analysis results of the proposed scheme show that it increases the slot utilization rate sufficiently despite the overhead of the control period in the multi-hop networks of the future soldier system.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.18-26
• /
• 2013

This paper proposes an efficient bandwidth utilization (EBU) algorithm that utilizes the unused bandwidth in dynamic bandwidth allocation (DBA) of a 10-gigabit-capable passive optical network (XGPON). In EBU, an available byte counter of a queue can be negative and the unused remainder of an available byte counter can be utilized by the other queues. In addition, EBU uses a novel polling scheme to collect the requests of queues as soon as possible. We show through analysis and simulations that EBU improves performance compared to that achieved with existing methods. In addition, we describe the hardware implementation of EBU. Finally we show the test results of the hardware implementation of EBU.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.739-740
• /
• 2013

This paper proposes a new dynamic bandwidth allocation algorithm for XGPON (10-Gigabit-capable passive optical network). The proposed algorithm uses a common service counter for each service class unlike to the existing algorithms. The unused bandwidth of a service class can be used for other service classes to increase bandwidth utilization. We illustrate examples to show the proposed algorithm is superior to existing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.593-603
• /
• 1997

Connection admission decision in ATM networks requires decision made in real time using fast algorithm. It is difficult to construct a model of the multiplexed traffic and thus, approximation of the traffic load is necessary. In this paper, we propose a measurement-based dynamic CAC(Connection admission Control) in ATM(Asynchronous Transfer Mode) networks, which observes current traffic by the moving window and set the window size to the value which is computed from the measured cell loss amount. It is based on the measurements of the traffic load over an admission period that is load enough to reflect the current traffic behavior instead of analytic modeling. And, the dynamic reallocation of bandwidth for each class leads to effective bandwidth utilization. The performance of proposed method is analyzed through computer simulation. The performance of proposed method is analyzed by using SIMAN simulation package and FORTRAN language. As can be seen in the simulation result, cell loss performance and bandwidth utilization have been increased.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.83-91
• /
• 1999

Dynamic characteristic of manufacturing stage is understood and the utilization of each machine is maximized by developing on-line dynamic CAPP system to consider the overloads in the aircraft part manufacturing line. In this paper, a scheme of production planning and scheduling system was proposed through inspection about some predeveloped CAPP system. Developed production planning and scheduling system included process planning module. After precise inspection of some FMS line schema at domestic heavy industry, optimized FMS line was applied to aircraft part manufacturing and repairing factory. By virtue of considering overloads of factory and machine through on-line dynamic CAPP system, the utilization of resources is maximized and manufacturing lead time is minimized.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.685-698
• /
• 2020

The dynamic stability of a functionally graded polymer microbeam reinforced by graphene oxides subjected to a periodic axial force is investigated. The microbeam is assumed to rest on an elastic substrate and is subjected to various immovable boundary restraints. The weight fraction of graphene oxides nanofillers is graded across the beam thickness. The effective Young's modulus of the functionally graded graphene oxides reinforced composite (FG-GORC) was determined using modified Halpin-Tsai model, with the mixture rule used to evaluate the effective Poisson's ratio and the mass density. An improved third order shear deformation theory (TSDT) is used in conjunction with the Chebyshev polynomial-based Ritz method to derive the Mathieu-Hill equations for dynamic stability of the FG-GORC microbeam, in which the scale effect is taken into account based on modified couple stress theory. Then, the Mathieu-Hill equation was solved using Bolotin's method to predict the principle unstable regions of the FG-GORC microbeams. The numerical results show the effects of the small scale, the graphene oxides nanofillers as well as the elastic substrate on the dynamic stability behaviors of the FG-GORC microbeams.

• Korean System Dynamics Review
• /
• v.1 no.2
• /
• pp.149-174
• /
• 2000

In recent years, how to promore the Utilization of Internet is a main issue of national information policy. In this study, we focused our approach to find promoting sttategies for Internet utilization on three sector's users, governments, enterprises, and households. Promoting the Internet utilization of these three sector's users is a very difficult problem, because their information levels are different and information gap among them can be regarded as bottleneck. And since the interactions between user's demands and diverse information seccor's factors are very complex, policy leverages can not find easily. By the system dynamics methodology, this paper examines the interrelationships between three user's demand mechanism and information policy sector. Information policy sector consist of four sectors, infrastruccure policy seccor, application-contents sector, governance sector, and access and price policy sector (free access policy, literacy policy, telecommunication price policy, etc.). To find and investigate policy leverage that will help understanding dynamic behavior of users in using Internet we build a causal loop diagrams and SD models by using survey data obtained from three sectors'specialized users, 488 persons.