• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.207-213
• /
• 2001

조밀한 건조조립토와 건설재료(콘크리트재)사이의 경계에서의 동마찰계수를 구하기 위하여 진동대를 사용하여 동적직접전단시험을 실시하였다. 조밀한 건조조립토와 건설재료사이의 동마찰계수는 본 연구에서 고려한 미끄러짐 속도의 범위안에서는 크게 변하지 않음을 알 수 있었다. 그리고 동마찰계수는 조립토의 평균입경이 증가함에 따라 감소하였고, 이에 대한 관계식을 제안하였다. 또한 이 계수를 같은 조립토에 대하여 실시한 평면변형률시험으로 얻어진 내부마찰각으로부터의 마찰계수와 비교하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3672-3684
• /
• 2015

Recently, the standardization of backward compatible JPEG image coding for high dynamic range (HDR) image has been undertaken to establish an international standard called "JPEG XT." The JPEG XT consists of two layers: the base layer and the residual layer. The base layer contains tone mapped low dynamic range (LDR) image data and the residual layer contains the error signal used to reconstruct the HDR image. This paper gives the result of a study to evaluate the overall performance of tone mapping operators (TMOs) for this standard. The evaluation is performed using five HDR image datasets and six TMOs for profiles A, B, and C of the proposed JPEG XT standard. The Tone Mapped image Quality Index (TMQI) and no reference image quality assessment (NR IQA) are used for measuring the LDR image quality. The peak signal to noise ratio (PSNR) is used to evaluate the overall compression performance of JPEG XT profiles A, B, and C. In TMQI and NR IQA measurements, TMOs using display adaptive tone mapping and adaptive logarithmic mapping each gave good results. A TMO using adaptive logarithmic mapping gave good PSNRs.

• 센서학회지
• /
• 제24권2호
• /
• pp.79-82
• /
• 2015

This paper proposes a novel complementary metal oxide semiconductor (CMOS) active pixel sensor (APS) and presents its performance characteristics. The proposed APS exhibits a linear-logarithmic response, which is simulated using a standard $0.35-{\mu}m$ CMOS process. To maintain high sensitivity and improve the dynamic range (DR) of the proposed APS at low and high-intensity light, respectively, two additional nMOSFETs are integrated into the structure of the proposed APS, along with a photogate. The applied photogate voltage reduces the sensitivity of the proposed APS in the linear response regime. Thus, the conversion gain of the proposed APS changes from high to low owing to the addition of the capacitance of the photogate to that of the sensing node. Under high-intensity light, the integrated MOSFETs serve as voltage-light dependent active loads and are responsible for logarithmic compression. The DR of the proposed APS can be improved on the basis of the logarithmic response. Furthermore, the reference voltages enable the tuning of the sensitivity of the photodetector, as well as the DR of the APS.

• 한국정보통신학회논문지
• /
• 제14권10호
• /
• pp.2254-2260
• /
• 2010

본 논문에서는 H.264/AVC 표준에서 사용되는 정수 변환을 변형하여 무손실 압축에 효율적인 변환 구현 방법을 제안한다. 기존의 가역(reversible) 변환용으로 제시된 정수 변환은 변환 계수의 값의 범위가 상당히 커서 무손실 압축에 효율적이지 못한 면이 있다. 이런 문제점을 해결하기 위해서 효율적인 정수 변환을 제시한다. 기존 정수 변환의 변형은 고속 연산 수행을 위해서 리프팅을 기반으로 설계되고 효율적인 구조를 도출한다. 본 논문의 결과로서 고속 연산 수행을 위한 신호 흐름도를 제시하고, 이에 관련된 실험 결과를 제공한다. 실험 결과는 제안된 변형 정수변환이 기존 구현 방법에 비하여 무손실 압축 성능에서 우수하단 것을 보여준다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.435-438
• /
• 2008

High temperature deformation of Ti-6Al-4V alloy with a lamellar colony microstructure was investigated by hot compression and torsion tests. The torsion and compression tests were carried out under a wide range of temperatures and strain rates with true strain up to 2 and 0.7, respectively. The processing maps were generated on the basis of compression and torsion test data and using the principles of dynamic materials modeling (DMM). The shapes of the strain-stress curves in alpha-beta region and processing maps obtained on the two different tests have been compared with a view to evaluate the effect of the microstructure evolution on the flow softening behavior of Ti-6Al-4V alloy with a lamellar colony microstructure.

• 한국엔터테인먼트산업학회논문지
• /
• 제13권2호
• /
• pp.93-100
• /
• 2019

현대 대중음악의 보컬 녹음에서 소리의 다이내믹을 압축해주는 컴프레서는 필수적인 장비이다. 컴프레서는 음악청취를 위한 믹스에서 뿐 아니라 가수가 녹음을 하는 중에 반주와 함께 자신의 목소리를 듣기 위한 모니터에 적용되기도 한다. 이 연구는 보컬 녹음에 있어 모니터 환경에 적용된 컴프레서가 가수의 가창에 미치는 영향에 대한 실험 연구다. 10명의 참여 가수를 섭외하여 블라인드 테스트로 모니터를 통해 들리는 보컬에 1:1, 2:1, 4:1의 압축 비율의 컴프레서를 걸어 가창에 어떻게 영향을 받는지를 실험하였다. 실험 결과 모니터에 적용된 압축 비율이 높을 수록 다이내믹이 큰 부분에서 더 크게 노래하고, 음색이 더 밝았지만 음정은 미세하게 부정확해지는 결과가 나타났다. 블라인드를 유지한 상황에서의 사후 인터뷰 결과 가수들은 모니터에 컴프레서를 통해 압축된 소리를 듣는 것을 대체로 선호하는 것도 발견되었다. 실험에서 사용한 음악이 다이내믹의 범위가 넓은 발라드곡이었기 때문에 모든 음악 녹음에 일반화할 수는 없지만 녹음 현장의 모니터링에 대한 중요한 시사점을 제공할 수 있을 것으로 생각한다. 또한 모니터 환경에 따른 가수의 가창에 미치는 영향에 대해 실증 연구를 통해 연구된 본 논문을 바탕으로 녹음 기술에 대한 인지과학적 접근이 추가로 이루어지기를 희망한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.47-50
• /
• 2003

Hot-forging Process and die design was made for a large-scale compressor wheel of Ti-6Al-4V alloy with 2-D FE analysis. The design integrated the geometry-controlled approach and dynamic materials modelling(DMM). In order to obtain the processing contour map of Ti-6Al-4V alloy based on DMM, compression tests were carried out in the temperature range of 915$^{\circ}C$ to 1015$^{\circ}C$ and the strain range of 10$\^$-3/s$\^$-1/ to 10s$\^$-1/. In the die design of the compressor wheel using the rigid-plastic FE analysis, forging dimensional accuracy, the capacity of the forging machine and defect-free forging were considered as main design factors. The microstructure of hot forged wheel using the designed die showed a typical alpha-beta structure without forging-defects.

• 전자공학회논문지D
• /
• 제34D권2호
• /
• pp.10-20
• /
• 1997

This paper describes the design, the manufacture and the development of th eautomatic gain control unit which ajdusts the gain of IF processor in the high sensitive & multifunctional receiver unit (HMR) for pulse doppler radar system. Accodording to the effective distnce of target, radar cross section, and a lot of external environments (such as clutter), the receiving stage of RADAR system often deviates from dynamic range. To solve this kind o fproblem, continuous/pulse wave AGC are realized, make it possible to control the gain characteristics of receiver stably, and can increase dynamic range linearly by adjusting the gain slope of receiver which is limited by 1-dB gain compression point. In this study, AGC unit is designed to regulate the total gain of receiver by using te analog feedback theory. It also has rapid enough response to process pulse signal. This study presents the gain control method of IF, the real manufacture technique (the package-type components) and the measurement performance of AGC.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1846-1863
• /
• 2016

High dynamic range (HDR) images can present the perfect real scene and rich color information. A commonly encountered problem in practical applications is how to well visualize HDR images on standard display devices. In this paper, we propose a multi-scale decomposition method using guided filtering for HDR image tone mapping. In our algorithm, HDR images are directly decomposed into three layers：base layer, coarse scale detail layer and fine detail layer. We propose an effective function to compress the base layer and the coarse scale detail layer. An adaptive function is also proposed for detail adjustment. Experimental results show that the proposed algorithm effectively accomplishes dynamic range compression and maintains good global contrast as well as local contrast. It also presents more image details and keeps high color saturation.

• 소성∙가공
• /
• 제10권4호
• /
• pp.347-354
• /
• 2001

Compression tests were carried out to investigate the hot-deformation behavior of Ti-6Al-4V alloy in the temperature range of $915^{\circ}C$ to $1015^{\circ}C$ and the strain rate range of $10^{-3}s^{-i}$ to $10s^{-1}$. Under the given test conditions, the hot-deformation of Ti-6Al-4V alloy was mainly led by dynamic recovery rather than by dynamic recrystallization. The activation energy for the plastic deformation in $\alpha+\beta$ field was about 894 kJ/mol and $\beta$ field was 332kJ/mo1. Processing map for hot working are developed on the basis of the variations of efficiency of power dissipation($\eta$=2m/m＋1) and flow instability criterion using the dynamic material model. The optimum process condition in the ($\alpha＋\beta$) field was obtained at the temperature ranges of $930^{\circ}C$ to $955^{\circ}C$$^{\circ}C$ and a strain rate of $10^{-3}s{-1}$.