• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.244-251
• /
• 1999

Large dynamic loads act on the rotor in rotary compressors. There are unbalance forces due to eccentric rotation parts and gas forces induced by the pressure difference between compression and suction gases. Rotor-journal bearing system is nonlinear since the stiffness and damping coef-ficients of the lubrication oil film are not constant in the bearings. in this paper the program for predicting the behaviors of rotor-journal bearing system of rotary compressor is developed. Finite element modeling is used to analyze the flexible rotor. The numerical results are compared with experimental results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.517-524
• /
• 1998

A liner numerical model of the wheel-rail interation and the track geometry is developed for multi-body dynamics program. The simulation results are very simulation to these of VAMPIRE simulation. This program can be used for the analysis of train dynamic performance.

• 한국지반공학회논문집
• /
• 제34권7호
• /
• pp.29-38
• /
• 2018

액상화 시 지반-말뚝 시스템의 동적 거동을 정확히 예측하기 위해 상용 유한 차분 프로그램인 FLAC3D를 이용하여 시간영역에서 3차원 수치 모델링을 수행하였다. 지반의 전단변형에 따른 간극수압의 발달을 직접적으로 모사하기 위해 유효응력 해석법을 이용한 액상화 모델인 Finn model을 적용하였으며 Mohr-Coulomb 탄소성 모델에 접목되어 해석이 수행되었다. 이력감쇠모델을 적용하여 지반 비선형 거동을 고려하였으며 지반과 말뚝 간의 분리현상, 미끄러짐 현상을 모사하는 인터페이스 모델을 적용하였다. 경계조건으로써 단순화 연속체 모델링 기법을 도입하여 반사파의 생성을 막고 해석 효율을 증가시켰으며 적절한 최대지반탄성계수와 항복 깊이의 설정으로 비선형 거동을 정확히 모사하고자 하였다. Wilson(1998)이 수행한 원심모형시험 케이스 중 상부지반 상대밀도가 55%인 모델을 이용하여 제안된 모델링 기법의 캘리브레이션을 수행한 결과, 수치해석으로부터 도출된 깊이 별 과잉간극수압 비-시간 이력, 휨모멘트-시간이력, 말뚝 두부 변위-시간이력이 실험 결과를 잘 모사하였다. 상부지반 상대밀도가 30%인 모델의 결과를 이용하여 제안된 모델링 기법의 적용성 평가를 수행한 결과, 수치해석으로부터 도출된 지반 및 말뚝 응답이 실험 결과를 잘 모사하였으며 제안된 모델링 기법이 지반-말뚝 시스템의 액상화 거동을 적절히 모사한다고 판단되었다.

• Geomechanics and Engineering
• /
• 제7권6호
• /
• pp.613-631
• /
• 2014

To complement the method of field-scale seismic ground motion simulations by buried blast techniques, the application and evaluation of the capability of a numerical modeling platform to simulate buried explosion-induced ground motion at a real soil site is presented in this paper. Upon a layout of the experimental setup at a level site wherein multiple charges that were buried over a large-diameter circle and detonated in a planned sequence, the formulation of a numerical model of the soil and the explosives using the finite element code LS-DYNA is developed for the evaluation of the resulting ground motion and surface subsidence. With a compact elastoplastic cap model calibrated for the loess soils on the basis of the site and laboratory test program, numerical solutions are obtained by explicit time integration for various dynamic aspects and their relation with the field blast experiment. Quantitative comparison of the computed ground acceleration time histories at different locations and induced spatial subsidence on the surface afterwards is given for further engineering insights in regard to the capabilities and limitations of both the numerical and experimental approaches.

• Steel and Composite Structures
• /
• 제24권4호
• /
• pp.499-512
• /
• 2017

This paper deals with nonlinear dynamic stability of embedded piezoelectric nano-composite separators conveying pulsating fluid. For presenting a realistic model, the material properties of structure are assumed viscoelastic based on Kelvin-Voigt model. The separator is reinforced with single-walled carbon nanotubes (SWCNTs) which the equivalent material properties are obtained by mixture rule. The separator is surrounded by elastic medium modeled by nonlinear orthotropic visco Pasternak foundation. The separator is subjected to 3D electric and 2D magnetic fields. For mathematical modeling of structure, three theories of classical shell theory (CST), first order shear deformation theory (FSDT) and sinusoidal shear deformation theory (SSDT) are applied. The differential quadrature method (DQM) in conjunction with Bolotin method is employed for calculating the dynamic instability region (DIR). The detailed parametric study is conducted, focusing on the combined effects of the external voltage, magnetic field, visco-Pasternak foundation, structural damping and volume percent of SWCNTs on the dynamic instability of structure. The numerical results are validated with other published works as well as comparing results obtained by three theories. Numerical results indicate that the magnetic and electric fields as well as SWCNTs as reinforcer are very important in dynamic instability analysis of structure.

• Earthquakes and Structures
• /
• 제13권6호
• /
• pp.589-598
• /
• 2017

In this paper, dynamic response of the horizontal concrete beam subjected to seismic ground excitation is investigated. The structure is reinforced by $Fe_2O_3$ nanoparticles which have the magnetic properties. The hyperbolic shear deformation beam theory (HSDBT) is used for mathematical modeling of the structure. Based on the Mori-Tanaka model, the effective material properties of concrete beam is calculated considering the agglomeration of $Fe_2O_3$ nanoparticles. Applying energy method and Hamilton's principle, the motion equations are derived. Harmonic differential quadrature method (HDQM) along with Newmark method is utilized for numerical solution of the motion equations. The effects of different parameters such as volume fraction and agglomeration of $Fe_2O_3$ nanoparticles, magnetic field, boundary conditions and geometrical parameters of concrete beam are studied on the dynamic response of the structure. In order to validation of this work, an exact solution is used for comparing the numerical and analytical results. The results indicated that applying magnetic field decreases the of the structure up to 54 percent. In addition, increase too much the magnetic field (Hx>5e8 A/m) does not considerable effect on the reduction of the maximum dynamic displacement.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.85-92
• /
• 2011

말뚝의 동적 거동은 지반-말뚝의 동적상호작용, 지반의 비선형성, 지반-말뚝 시스템의 공진 현상 등 많은 요소가 상호 작용을 하므로 매우 복잡하다. 그러므로, 말뚝의 동적 거동을 수치해석으로 정확히 모사하려면 많은 노력과 시간이 필요하다. 본 연구에서는 기존의 범용 수치해석 프로그램인 FLAC 3D를 활용하면서도 해석시간을 크게 감소 시킬 수 있는 새로운 모델링 기법을 개발하였다. 본 기법은 전체 해석 영역을 근역 지반과 원역 지반으로 나누고 지반-말뚝 동적상호작용에 영향을 받지 않는 원역 지반을 요소망으로 모델링하는 대신 원역 지반의 지반 운동 시간이력을 근역 지반의 경계 조건에 입력 하중으로 적용하는 기법이다. 이 수치 모델링에서 지진파의 강도가 클 때 일어나는 지반의 비선형 거동을 모사하기 위하여 이력 감쇠 모델을 이용하여 접선 탄성 계수를 전단 변형률의 함수 값으로 입력하였으며, 지반과 말뚝 사이의 분리 현상을 모사하기 위하여 지반-말뚝 경계 요소를 도입하였다. 이 방법은 기존의 방법과 비교하여 해석 결과의 정확성을 유지하면서 해석 시간을 1/3로 감소시켰다. 제안된 수치해석 방법으로 예측한 1g 진동대 모형 실험의 원형 거동은 원형으로 환산한 모형 실험 결과와 유사하게 나타났다.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1105-1129
• /
• 2014

The unscented Kalman filter (UKF) has been developed for nonlinear model parametric identification, and it assumes that the model parameters are symmetrically distributed about their mean values without any constrains. However, the parameters in many applications are confined within certain ranges to make sense physically. In this paper, a constrained unscented Kalman filter (CUKF) algorithm is proposed to improve accuracy of numerical substructure modeling in hybrid testing. During hybrid testing, the numerical models of numerical substructures which are assumed identical to the physical substructures are updated online with the CUKF approach based on the measurement data from physical substructures. The CUKF method adopts sigma points (i.e., sample points) projecting strategy, with which the positions and weights of sigma points violating constraints are modified. The effectiveness of the proposed hybrid testing method is verified by pure numerical simulation and real-time as well as slower hybrid tests with nonlinear specimens. The results show that the new method has better accuracy compared to conventional hybrid testing with fixed numerical model and hybrid testing based on model updating with UKF.

• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.649-664
• /
• 2023

Structural inertial interaction is a representative the effect of dynamic soil-foundation-structure interaction (SFSI), which leads to a relative displacement between soil and foundation, period lengthening, and damping increasing phenomena. However, for a system with a significantly heavy foundation, the dynamic inertia of the foundation influences and interacts with the structural seismic response. The structure-to-foundation mass ratio (MR) quantifies the distribution of mass between the structure and foundation for a structure on a shallow foundation. Although both systems exhibit the same vertical factor of safety (FS_v), the MR and corresponding seismic responses attributed to the structure and foundation masses may differ. This study explored the influence of MR on the permanent deformation and seismic response of soil-foundation-structure system considering SFSI via numerical simulations. Given that numerous dimensionless parameters of SFSI described its influence on the structural seismic response, the parameters, except for MR and FS_v, were fixed for the sensitivity analysis. The results demonstrated that the foundation inertia of heavier foundations induced more settlement due to sliding behavior of heavily-loaded systems. Moreover, the structural inertia of heavier structures evidently exhibited foundation rocking behavior, which results in a more elongated natural period of the structure for lightly-loaded systems.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1212-1220
• /
• 2004

The structural unbalance mass and laundry are the important sources of the severe vibrations of automatic washing machines. In this paper, a mathematical model is developed for the dynamic analysis of the vertical axis automatic washing machines of pulsator-type. In the model, the rigid body motion of tub assembly is represented by six degrees of freedom and the dynamics of automatic hydraulic balancer is represented by one degree of freedom. The fundamental elastic modes of the tub shell and four suspension bars are also taken into account in the mathematical model, based on analytical and experimental modal analysis results. The 12 degrees of freedom equations of motion are derived by using the Lagrange's equations and the present dynamic model is evaluated by comparing the numerical simulation results with experimentally measured data.