• Macromolecular Research
• /
• 제10권2호
• /
• pp.60-66
• /
• 2002

The morphology, dynamic mechanical behavior and fracture behavior of polyetherimide (PEI)/dicyanate semi-interpenetrating polymer networks (semi-IPNs) with a morphology spectrum were analyzed. To obtain the morphology spectrum, we disported PEI particles in the procured dicyanate resin containing 300 ppm of zinc stearate catalyst. The semi-IPNs exhibited a morphology spectrum, which consisted of nodular spinodal structure, dual-phase morphology, and sea-island type morphology, in the radial direction of each dispersed PEI particle due to the concentration gradient developed by restricted dissolution and diffusion of the PEI particles during the curing process of the dicyanate resin. Analysis of the dynamic mechanical data obtained by the semi-IPNs demonstrated that the transition of the PEI-rich phase was shifted toward higher temperature as well as becoming broader because of the gradient structure. The semi-IPNs with the morphology spectrum showed improved fracture energy of 0.3 kJ/$m^2$, which was 1.4 times that of the IPNS having sea-island type morphology. It was found that the partially introduced nodular structure played a crucial role in the enhancement of the fracture resistance of the semi-IPNs.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.155-159
• /
• 2009

화약류를 이용한 균열제어공법은 자원 및 석유개발, 토목 등 다양한 분야에서 적용되어 오고 있다. 암반을 대상으로 균열제어설계를 위해서는 다양한 암반의 물성과 가압방식의 변화에 따른 파괴과정을 이해할 필요가 있다. 본 연구에서는 반무한 암반 내 시추된 원형공벽에 임의의 입사파가 작용하여 주변에 균열이 전파하는 동적파괴현상을 수치해석적으로 모사하였다. 탄성정수는 국내의 암반분류에서 적용하는 물성치를 사용하였으며 하중가압속도는 1-100MPa/${\mu}s$의 범위까지 변화시키며 암반 내 균열전파양상을 살펴보았다.

• 화약ㆍ발파
• /
• 제26권1호
• /
• pp.49-55
• /
• 2008

터널 및 지하공동 폐기물 처분시설의 건설에서 여굴을 적게하고 굴착후 잔류암반의 안정성을 높이기 위하여 TBM 및 할암기 등의 기계적 굴착공법의 적용이 제안되고 있다. 그러나 기계적 굴착공법은 경비나 시공성, 현장 적용성에 있어서 많은 제약이 따르고 있다. 이러한 단점을 보안하기 위하여 고도의 정밀제어발파공법이 제안되고 있다. 특히 노치 장약공을 이용하여 예정된 굴착면을 따라 정밀하게 파단면을 형성시키는 방법이 제안되고 있지만 아직까지 균열제어에 관련된 연구가 미흡한 실정이다. 본 연구에서는 동적파괴과정해석코드를 이용하여 암반내 노치를 가진 발파공을 모델링하여 암반의 균열발생 메커니즘과 파괴과정을 수치해석적으로 검토하였다.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1025-1032
• /
• 2010

Gas turbine compressor blades used in a combined cycle power plant are possibly damaged and fractured during their operation. There are two possible causes of the failure of compressor blades; one is a defect of material quality which can be detected through some microscopic inspections for the fracture section, the other is high cycle fatigue problem caused by vibration and can be diagnosed by carrying out dynamic characteristics analysis for the blades. In this paper, in order to determine the cause of the failure of compressor blades in a combined cycle power plant, examination of the fracture section and the propagation mechanism of the crack via stress analysis are performed. Dynamic characteristics analysis via FRF estimation is also performed to identify the cause of failure.

• 화약ㆍ발파
• /
• 제37권3호
• /
• pp.25-33
• /
• 2019

지하광산의 갱내 굴착 과정에서 폭약을 사용하여 발파하는 경우, 최외곽공의 폭력을 조절하여 외부 암반의 손상도 감소와 원활한 파단면을 형성하는 작업은 종업자의 안전 및 작업능률을 향상시키는 결과를 가져올 수 있다. 본 연구는 2차원의 동적파괴과정해석기법인 DFPA-2D 코드를 사용하여 단일 장약공에서 발파 시, 장약공의 직경과 디커플링 지수에 따라 생성되는 균열손상범위를 수치해석적으로 확인하였고 Sweden의 발파손상영역 경험식을 이용하여 암반손상범위를 예측하고 DFPA 해석결과와 비교하였다. 추가로 DFPA코드를 지하채광발파의 최외곽공 발파균열예측에 적용하여 파단면형성 및 발파손상발생 메커니즘에 대하여 검토하였다.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.76-81
• /
• 2000

Analysis on failure of the panel glass under mechanical shock is the main topic of this study. Since the glass for the LCD panel is thin, it needs to be designed to have enough toughness against mechanical shock. In this paper, a process of estimating fracture of the panel glass is proposed to guarantee reliability of the product. The fracture toughness of the panel glass is used as a criterion of the fracture based on an experimental approach. The stress intensity factor was calculated considering a model with the largest initial crack size on a cut surface and with the boundary force obtained from a dynamic finite element analysis. Critical surface roughness on the cut surface of a typical glass panel, to prevent fracture in case of bending mode, is obtained.

• Steel and Composite Structures
• /
• 제31권2호
• /
• pp.113-123
• /
• 2019

In this study, carbon fiber/epoxy (CF/EP) composites were interleaved with aramid nonwoven veils with an areal weight density of $8.5g/m^2$ to improve their Mode-I fracture toughness. The control and aramid interleaved CF/EP composite laminates were manufactured by VARTM in a [0]4 configuration. Tensile, three-point bending, compression, interlaminar shear, Charpy impact and Mode-I (DCB) fracture toughness values were determined to evaluate the effects of aramid nonwoven fabrics on the mechanical performance of the CF/EP composites. Thermomechanical behavior of the specimens was investigated by Dynamic Mechanical Analysis (DMA). The results showed that the propagation Mode-I fracture toughness values of CF/EP composites can be significantly improved (by about 72%) using aramid nonwoven fabrics. It was found that the main extrinsic toughening mechanism is aramid microfiber bridging acting behind the crack-tip. The incorporation of these nonwovens also increased interlaminar shear and Charpy impact strength by 10 and 16.5%, respectively. Moreover, it was revealed that the damping ability of the composites increased with the incorporation of aramid nonwoven fabrics in the interlaminar region of composites. On the other hand, they caused a reduction in in-plane mechanical properties due to the reduced carbon fiber volume fraction, increased thickness and void formation in the composites.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1273-1280
• /
• 2003

In this paper, transparent dynamic photoelastic experimental hybrid method for propagating cracks in orthotropic material was developed. Using transparent dynamic photoelastic experimental hybrid method, we can obtain stress intensity factor and separate the stress components from only isochromatic fringe patterns without using isoclinics. When crack is propagated with constant velocity, the contours of stress components in the vicinity of crack tip in orthotropic material are similar to those of isotropic material or orthotropic material with stationary crack under the static load. Dynamic stress intensity factors are decreased as crack growths. It was certified that the dynamic photoelastic experimental hybrid method was very useful for the analysis of the dynamic fracture mechanics.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.313-330
• /
• 1993

The propagating crack problems under dynamic plane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems in orthortropic material, it is important to know the dynamic stress components and dynamic displacement components around the crack tip. Therefore the dynamic stress components of dynamic stress field and dynamic displacement components of dynamic displacement field in the crack tip of orthotropic material under the dynamic load and the steady state in crack propagation were derived. When the crack propagation speed approachs to zero, the dynamic stress component and dynamic displacement components derived in this study are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determinded by using the concept of crack closure closure energy with the dynamic stresses and represented according to physical properties of the orthotrophic material and crack speeds. The faster the crack velocity, the greater the stress value of stress components in crack tip. The stress value of the stress component of crack tip is greater when fiber direction coincides with the crack propagation than when fider direction is normal to the crack propagation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.826-831
• /
• 2005

In this paper the effect of moving mass on dynamic behavior of cracked cantilever beam on elastic foundations is presented. Based on the Euler-Bernoulli beam theory, the equation of motion can be constructed by using the Lagrange's equation. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. That is, the crack is modelled as a rotational spring. This flexibility matrix defines the relationship between the displacements and forces across the crack section and is derived by applying fundamental fracture mechanics theory. The crack is assumed to be in the first mode of fracture. As the depth of the crack is increased, the tip displacement of the cantilever beam is increased. When the crack depth is constant the frequency of a cracked beam is proportional to the spring stiffness.