• Transactions on Control, Automation and Systems Engineering
• /
• 제2권1호
• /
• pp.24-30
• /
• 2000

The aim of this paper is to describe an advanced method of the fault diagnosis using Control Theory with reference to a crack detection, a new way to localize the crack position under influence of the plant disturbance and white measurement noise on a rotating shaft. As the first step, the shaft is physically modelled with a finite element method as usual and the dynamic mathematical model is derived from it using the Hamilton-principle and in this way the system is modelled by various subsystems. The equations of motions with a crack are established by the adaption of the local stiffness change through breathing and gaping[1] from the crack to the equation of motion with an undamaged shaft. This is supposed to be regarded as a reference system for the given system. Based on the fictitious model of the time behaviour induced from vibration phenomena measured at the bearings, a nonlinear state observer is designed in order to detect the crack on the shaft. This is the elementary NL-observer(EOB). Using the elementary observer, an Estimator(Observer Bank) is established and arranged at the certain position on the shaft. In case, a crack is found and its position is known, the procedure, fro the estimation of the depth is going to begin.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.399-402
• /
• 2005

For efficient and accurate diagnosis of ultrasound images, the time gain compensation (TGC) and dynamic range (DR) control of the ultrasound echo signal are important. TGC is for compensating the attenuation of the ultrasound echo signal along the depth, and DR is used to control the image contrast. In this paper, we propose an algorithm for finding the optimized values of TGC and DR automatically. For TGC, the degree of compensation is determined along the depth based on the effective attenuation estimation of ultrasound signal. For DR optimization, we introduce a novel cost function on the basis of the characteristics of ultrasound image, which provides the minimum value at the optimal DR. Experiments have been performed by applying the proposed algorithm to a real US imaging system. The results show that the algorithm automatically can determine the values of TGC and DR in realtime so that the subjective quality of the corresponding US image may be good enough for diagnosis.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.535-550
• /
• 2016

Securing the safety and the reliability of liquid-propellant rocket engines (LREs) for space vehicles is indispensable as engines consist of many complex components and operate under extremely high energy-dense conditions. Thus, health monitoring has become a mandatory requirement, especially for the reusable LREs that are currently being developed. In this context, a dynamic simulation program based on MATLAB/Simulink was developed in the current research on the Space Shuttle Main Engine (SSME), a partly reusable engine. Then, a series of fault simulations using this program was conducted: at a steady state operating condition (104% Rated Propulsion Level), various simulated fault conditions were artificially injected into the simulation models for the five major valves, the pumps, and the turbines of the SSME. The consequent effects due to each fault were analyzed based on the time responses of the major parameters of the engine. It is believed that this research topic is an essential pre-step for the development of fault detection and diagnosis algorithms for reusable engines in the future.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2006년도 춘계학술대회
• /
• pp.327-335
• /
• 2006

Case Based Reasoning (CBR) has come to be considered as an appropriate technique for diagnosis, prognosis and prescription in medicine. However, canventional CBR has a limitation in that it cannot incorporate asymmetric misclassification cast. It assumes that the cast of type1 error and type2 error are the same, so it cannot be modified according ta the error cast of each type. This problem provides major disincentive to apply conventional CBR ta many real world cases that have different casts associated with different types of error. Medical diagnosis is an important example. In this paper we suggest the new knowledge extraction technique called Cast-Sensitive Case Based Reasoning (CSCBR) that can incorporate unequal misclassification cast. The main idea involves a dynamic adaptation of the optimal classification boundary paint and the number of neighbors that minimize the tatol misclassification cast according ta the error casts. Our technique uses a genetic algorithm (GA) for finding these two feature vectors of CSCBR. We apply this new method ta diabetes datasets and compare the results with those of the cast-sensitive methods, C5.0 and CART. The results of this paper shaw that the proposed technique outperforms other methods and overcomes the limitation of conventional CBR.

• 대한정형외과 초음파학회지
• /
• 제1권2호
• /
• pp.94-111
• /
• 2008

전통적으로 슬관절 질병은 주로 방사선 촬영과 자기 공명 영상에 근거하여 진단과 치료를 하고 있다. 그러나 방사선 진단은 골 내부의 변화에는 좋은 영상을 가져다 주지만 연부 조직의 영상은 잘 볼 수 없는 단점이 있고 외래 진료실에서 실시간으로 할 수 없는 단점이 있다. 또 자기 공명 영상은 고가이고 역시 실시간으로 볼 수 없으며 정적인 정보만 제공한다. 초음파는 동적인 영상을 실시간으로 외래 진료실에서 즉시 볼 수 있고 비용이 저렴하며 동적 영상을 제공하고 연조직 영상을 잘 보여준다. 슬관절에서는 연조직 및 골 표면의 변화까지 관찰이 가능하므로 진단에 중요한 역할을 한다. 이 글에서는 정상적인 구조물의 초음파 영상과 병적 소견을 방사선 또는 자기 공명 영상 소견과 연계하여 소개하고 그 용도의 개략적인 것들을 설명하였다.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.683-690
• /
• 2017

In the stability and sensitivity design and diagnosis approaches, there are various methodologies available. Bond graph modeling by lumping technique is one of the universal methodologies in methodical analysis used by many researchers in all over the world. The accuracy of the method is validated in different arenas. Bond graphs are a concise, pictorial representation of the energy storage, dissipation and exchange mechanisms of interacting dynamic systems, subsystems and components. This paper proposes a bond graph modeling for distributed parameter systems using lumping techniques. Therefore, a steel frame structure was modeled to analyze employing bond graph modeling of distributed system using lumping technique. In the analytical part, the effectiveness of bond graphs to model this system is demonstrated. The dynamic responses of the system were computed and compared with those computed from the finite element analysis. The calculated maximum deflection time histories were found to be comparable. The sensitivity and the stability of the steel frame structure was also studied in different aspects. Thus, the proposed methodology, with its simplicity, can be used for stability and sensitivity analyses as alternative to finite element method for steel structures. The major value brought in the practical design is the simplicity of the proposed method for steel structures.

• Steel and Composite Structures
• /
• 제49권6호
• /
• pp.701-711
• /
• 2023

In order to fully reflect variation characteristics of composite concrete dam health state, the monitoring data is applied to diagnose composite concrete dam health state. Composite concrete dam lesion development to wreckage is a precursor, and its health status can be judged. The monitoring data are generally non-linear and unsteady time series, which contain chaotic information that cannot be characterized. Thus, it could generate huge influence for the construction of monitoring models and the formulation of corresponding health diagnostic indicators. This multi-scale diagnosis process is from point to whole. Chaotic characteristics are often contained in the monitoring data. If chaotic characteristics could be extracted for reflecting concrete dam health state and the corresponding diagnostic indicators will be formulated, the theory and method of diagnosing concrete dam health state can be huge improved. Therefore, the chaotic characteristics of monitoring data are considered. And, the extracting method of the chaotic components is studied from monitoring data based on fuzzy dynamic cross-correlation factor method. Finally, a method is proposed for formulating composite concrete dam health state indicators. This method can effectively distinguish chaotic systems from deterministic systems and reflect the health state of concrete dam in service.

• 대한족부족관절학회지
• /
• 제28권2호
• /
• pp.71-74
• /
• 2024

This report presents a unique case of checkrein deformities in both halluces following isolated intramuscular sarcoidosis, a rare occurrence given the infrequent musculoskeletal involvement in sarcoidosis. Typically resulting from flexor hallucis longus tendon entrapment by scar tissue post-trauma, the checkrein deformity reported in this paper presented with unusual metatarsophalangeal joint flexion and interphalangeal joint extension during ankle dorsiflexion. A 49-year-old woman with a history of intramuscular sarcoidosis presented with a great toe deformity and discomfort while wearing shoes, leading to a diagnosis of dynamic deformity, possibly attributed to tendon tethering by sarcoidosis. Surgical treatments, including abductor hallucis muscle intratendinous tenotomy, flexor hallucis longus Z-plasty lengthening, Weil osteotomy, and Kirschner wire fixation, significantly improved the functional scores and patient discomfort. This report underscores the importance of recognizing dynamic deformities and the potential for rare diseases, such as sarcoidosis, to cause such conditions, highlighting the need for careful diagnosis and tailored surgical intervention for atypical checkrein deformities.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2509-2522
• /
• 2021

A valve assembly used in nuclear power plants must be qualified and supervised. New technical standards such as ASME QME-1 2007 particularly require detailed qualification using experiment and analysis. Particularly, diagnostic tests and engineering studies are required for qualification of ASME QME-1 2007. Among these studies, the research on the measurement of friction coefficient and packing stress is important. The irregular change of packing stress along the stroke distance occurs because of the abnormal phenomenon, which must be found and studied with quantitative methods. Packing stress should be analyzed conservatively through experimentation and analysis. In this study, various formulas were applied to measure and calculate coefficient of friction and packing stress. This study can be used in relation to qualification and supervision of packing materials. And the calculation using static diagnosis test can be used to find the packing frictional force in dynamic diagnosis test with flow pressure in a pipe. This study has made it possible to reliably consider packing frictional force generated in a valve body. And so, it is believed that more margin can be secured when evaluating the capacity of valve actuator by applying the accurate frictional force generated in the valve assembly.

• Investigative Magnetic Resonance Imaging
• /
• 제24권1호
• /
• pp.55-60
• /
• 2020

Tietze's syndrome is an inflammatory condition associated with painful swelling of the costochondral, costosternal, and sternoclavicular joints. Tietze's syndrome has been mostly attributed to microtrauma until now; however, this etiology is currently disputed. The diagnosis is based on clinical findings, although a few studies suggest the advantages of imaging. We report a case of Tietze's syndrome with a review of radiological findings, especially magnetic resonance imaging (MRI) with dynamic contrast enhancement.