• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1041-1050
• /
• 1995

The deformed shape of rod specimen of copper alloys was measured after the high-velocity impact against a rigid anvil and analyzed with one-dimensional theory to determine dynamic yield stress and strain-rate sensitivity which is defined as the ratio of dynamic yield stress to static flow stress. The evvect of two-dimensional deformation on the determination of dynamic yield stress by the one-dimensional theory, was investigated through comparison with the analysis by hydrocode. It showed that the one-dimensional theory is relatively consistent with two-dimensional hydrocode in spite of its simplicity in analysis.

• 소성∙가공
• /
• 제5권4호
• /
• pp.327-336
• /
• 1996

The effect of dynamic strain aging on high temperature deformation behaviour of the A-Mg alloy was investigated by strain rate change tests and stress relaxation tests between 20$0^{\circ}C$and 50$0^{\circ}C$. Yield point, short stress transient and periodic discontinuities on the stress-strain curve were considered as an evidence of the effect of dynamic strain aging. With this criterion two distinct strain rate-temperature regimes could be manifested. Dynamic strain aging was considered to be effective in the high temperature-low strain rate regime, whereas dynamic recovery was a dominant deformation mechanism in the low temperature-high strain rate regime. It was found that dynamic strain aging in the high temperature deformation was governed by the mechcanism of diffusion-controlled, viscous dislocation movement.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.124-131
• /
• 1996

The dynamic material property of Mn-B ally high-strength steel is investigated through the rod impact test which is one of simple test methods for the analysis of the material behavior under high-strain-rate. Rod impact test is performed to produce the deformed shape of rod and analyzed by the one-dimensional theory based on conservation law and the two-dimensional hydrocode AUTODYN-2D. The dynamic yield stress is determined and compared with the static yield stress to investigate the strain-rate sensitivity of Mn-B alloy high-strength steel.

• 한국도로학회논문집
• /
• 제19권4호
• /
• pp.19-25
• /
• 2017

PURPOSES : In this paper, the flow of construction material was simulated using computational fluid dynamics in a 2D axisymmetric condition to evaluate the effect of initial or varying material properties on the final shape of a specimen. METHODS : The CFD model was verified by using a well-known analytical solution for a given test condition followed by performing a sensitivity analysis to evaluate the effect of material properties on the final shape of material. Varying dynamic viscosity and yield stress were also considered. RESULTS : The CFD model in a 2D axisymmetric condition agreed with the analytical solution for most yield stress conditions. Minor disagreements observed at high yield stress conditions indicate improper application of the pure shear assumption for the given material behavior. It was also observed that the variation of yield stress and dynamic viscosity during curing had a meaningful effect on the final shape of the specimen. CONCLUSIONS : It is concluded that CFD modeling in a 2D axisymmetric condition is good enough to evaluate fluidal characteristics of material. The model is able to consider varying yield stress and viscosity during curing. The 3D CFD-DEM coupled model may be required to consider the interaction of aggregates in fluid.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.78-89
• /
• 1993

본 연구에서는 Gillis 이론의 이와같은 단점을 보완하기 위하여 Gillis에 의 하여 제시된 수정운동량 보존법칙과 Hawkyard에 의하여 제시된 에너지보존법칙을 일반 화한 수정에너지보존법칙을 동시에 고려하여 재료의 동적항복응력을 결정할 수 있으며, 봉충격시험편의 충돌완료 후의 변형형상간의 관계를 고려할 수 있는 이론을 제시하였 다. 또한 기존의 실험결과로부터 제시된 이론의 타당성을 분석하였으며, 시험편의 변형형상의 측정오차가 동적항복응력의 결정에 미치는 영향을 분석하였다. 한편 압 축공기를 이용한 시험편 가속정치에 의하여 봉충격시험을 수행하여 괘삭황동(free -cutting brass)의 고변형률속도하에서의 변형특성과 동적항복응력을 결정하였다.

• Nuclear Engineering and Technology
• /
• 제21권2호
• /
• pp.89-98
• /
• 1989

지르칼로이 -4 피복관에 대해서 3가지 변형 속도로(1.2$\times$10E-7/s, 2.0$\times$10E-6/s, 3.2$\times$10E -5/s), 553-873K의 온도 구간에서 구리 맨드렐 팽창 시험법을 공기와 진공(5$\times$10E-5 torr) 분위기에서 수행했고, 변형 속도의 변화는 시편의 가열 속도를 조절함으로써 얻을 수 있었다. 각각의 변형 속도에서 항복 응력 피크와 변형 속도 감도 최저값 그리고 활성화 부피 극대값이 나타나는 이유는 동적변형시효 현상 때문이라고 설명된다. 항복 응력 피크가 나타나는 온도와 변형속도로부터 얻어진 동적변형시효의 활성화 에너지는 196(KJ/mol)이었고 이 값은 $\alpha$-지르코니움과 지르칼로이-2에서 활성화 에너지(207-220 KJ/mol)값과 잘 일치한다. 그러므로 573-673K의 온도 구간에서 나타나는 동적변형시효 현상은 산소원자 때문이라고 생각된다. 산화에 의한 항복 응력의 증가는 공기중 실험과 진공 실험으로 얻어진 항복 응력값을 비교함으로서 얻었고, 그것은 항복 응력의 증가 분율로 표시했다. 결과는 변형속도가 느릴 수록 증가 분율은 더욱 더 커짐을 알 수 있었다. 그리고 산소 침투량과 항복 응력 증가 사이의 관계가 직선적이라는 가정하에 공기와 수중에서의 산화 속도를 비교하여 수중에서의 항복 응력 값을 계산해 보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.849-853
• /
• 2002

A specific experimental method, the split Hopkinson pressure bar (SHPB) technique has been widely used to determine the dynamic material properties under the impact compressive loading conditions with strain-rate of the order of 103/s~104/s. In this paper, dynamic deformation behaviors of rubber materials widely used for the isolation of vibration from varying structures under dynamic loading are determined using a Split Hopkinson Pressure Bar technique.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.297-310
• /
• 2017

A CFD software was used to simulate free surface flow of SCC in the T-Box test. In total, seven simulations were developed to study the effect of rheological parameters on the non-restricted flow performance of SCC in both horizontal and vertical directions. Different suspending fluids having five plastic viscosity values between 10 and 50 Pa.s, three yield stress values between 14 and 75 Pa, one density of $2500kg/m^3$, and one shear elasticity modulus of 100 Pa were considered for suspension of 178 spherical particles of 20-mm diameter and $2500kg/m^3$ density. The results of the simulations are found to correlate well to changes in rheological parameters of the suspending fluid. Plastic viscosity was shown to be the most dominant parameter affecting flowability and dynamic stability compared to the yield stress. A new approach was proposed to evaluate performability of SCC based on a trade-off between flowability and dynamic stability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.248-253
• /
• 2000

This paper presents parametric study of long-rod penetration. Influences of yield stress of penetrator and target material on the penetration results such as crater size and penetrator residual length are contemplated. Numerical experiments are carried out with varying the value of static yield stress of materials. Lagrangian explicit code NET2D was used to perform parametric study. Element eroding algorithm was used to properly simulate long-rod penetration. Analytic and empirical model of long-rod penetration and Taylor test are used to explain the relationships of parameter and simulation results.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.757-764
• /
• 2006

Isothermal cyclic stress-strain deformation and thermomechanical deformation (TMD) of 429EM stainless steel were analyzed using a rheological model employing a bi-linear model. The proposed model was composed of three parameters: elastic modulus, yield stress and tangent modulus. Monotonic stress-strain curves at various temperatures were used to construct the model. The yield stress in the model was nearly same as 0.2% offset yield stress. Hardening relation factor, m, was proposed to relate cyclic hardening to kinematic hardening. Isothermal cyclic stress-strain deformation could be described well by the proposed model. The model was extended to describe TMD. The results revealed that the hi-linear thermomechanical model overestimates the experimental data under both in-phase and out-of-phase conditions in the temperature range of $350-500^{\circ}C$ and it was due to the enhanced dynamic recovery effect.