• 대한인간공학회지
• /
• 제26권2호
• /
• pp.35-44
• /
• 2007

Work-related musculoskeletal disorders (WMSDs) are a major problem in industries in which manual materials handling is performed by workers. To prevent these WMSDs, it is necessary to understand the muscular strength capability and use this knowledge to design job and selection and assignment of workers. Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. However, a few researches have been done for one-hand lifting activity of manual materials handling tasks. The objective of this study is to compare one-hand and two-hands lifting strength in terms of static and dynamic strength of the lifting activity for the ranging from the height of knuckle to elbow. It is shown in this study that the isometric lifting strength of one-hand is ranging from 54.7 to 63.3% of the one of two-hands. However, it is found that there is no significant difference between a person's isometric lifting strength for left-hand and right-hand. It is also shown that there is no significant difference between the peak force under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Similar results were obtained for the peak acceleration and peak velocity under the dynamic sub-maximal loading with one-hand and two-hands lifting activity. Isometric lifting strength at the height of knuckle was ranging from 2 to 3 times of the dynamic peak force during sub-maximal lifting. It is concluded that the dynamic peak forces under the sub-maximal loading are not highly correlated with the isometric lifting strength in similar postures.

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.414-420
• /
• 2021

Objective: The purpose of this study was to investigate the effects of coordinative locomotor training(CLT) using elastic bands on dynamic balance and grip strength for Elementary school baseball players and to provide correct posture guidance and reference on the prevention and rehabilitation program of sports damage and injury in the future. Design: Two groups pre-post randomized controlled design. Methods: Forty-six subjects were randomly divided in two groups;1) CLT using Elastic Band group(Experimental group, n=23), 2) Routine baseball training group(Control group, n=23). The intervention was conducted total 16 times for sixty minutes a day, 2 times a week, for 8 weeks. Evaluations of dynamic balance ability and grip strength were performed with all subjects before the commencement of training and 8 weeks after training. Results: Compared to the control group after training, the dynamic balance ability and dominant handgrip strength of the experimental group were significantly more improved(p<0.05). Conclusions: We confirmed that the effects of CLT using elastic bands on dynamic balance ability and grip strength in Elementary school baseball player. This study should be used for improving the quality of the Elementary school baseball player's training and would be contributed prevention and rehabilitation program of sports damage and injury.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.504-513
• /
• 2021

In this study, cross-laminated wood panels were manufactured with four softwoods and three hardwoods with the goal of efficiently predicting the static strength performance using dynamic modulus of elasticity (MOE) and simultaneously revealing the dynamic performance of cross-laminated wood panels. The effect of the density of the species on the dynamic MOE of the laminated wood panels was investigated. Moreover, the static bending strength performance was predicted nondestructively through the correlation regression between the dynamic MOE and static bending strength performance. For the dynamic MOE, the parallel- and cross-laminated wood panels composed of oriental oak showed the highest value, whereas the laminated wood panels composed of Japanese cedar showed the lowest value. In all types of parallel- and cross-laminated wood panels, the density dependence was confirmed, and the extent of the density dependence was found to be greater in the P_⊥ and C_⊥ types with perpendicular-direction laminae in the faces than in the P_∥ and C_∥ types with longitudinal-direction laminae in the faces. Our findings confirmed that a high correlation exists at a significance level of 1% between the dynamic modulus and static bending modulus or bending strength in all types of laminated wood panels, and that the static bending strength performance can be predicted through the dynamic MOE.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.850-856
• /
• 1998

The dynaamic fatigue behavior of alumina ceramics was observed at room temperature using four-point bending method. Dynamic fatigue fracture strength was observed as function of down speed and notch length. The crack growth exponent of the specimens was calculated from the fracture strength and lifetime in dynamic fatigue test. After loading the stresses in the range of 0% to 105% compared with the average in-ert strength the value of residual fracture strength was measured for unnotched and 0.5mm notched speci-mens at the 0.001 and 0.0005 mm/min down speed respectively. After the 95% stress of the average inert strength was applied repeatedly the value of rsidual fracture strength was measured for 0.5mm notched specimens at the 0.001 and 0.0005 mm/min down speed respectively. The material constant A was found to be almost the same and not to depend on the loading mode or the down speed for unnotched and notched specimen. The value of fracture strength with time calculated from the constants n and A was in good agreement with the measured value.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.445-450
• /
• 2001

The paper investigates the relationships between dynamic elastic modulus and static elastic modulus or compressive strength according to curing temperature, aging, and cement type. Based on this investigation, the new model equations are proposed. Impact echo method estimates the resonant frequency of specimens and uniaxial compression test measures the static elastic modulus and compressive strength. Type I and V cement concretes, which have the water-cement ratios of 0.40 and 0.50, are cured under the isothermal curing temperature of 10, 23, and 50 $^{\circ}C$. Cement type and aging have no large influence on the relationship between dynamic and static elastic modulus, but the ratio of dynamic and static elastic modulus comes close to 1 as temperature increases. Initial chord elastic modulus, which is calculated at lower strain level of stress-strain curve, has the similar value to dynamic elastic modulus. The relationship between dynamic elastic modulus and compressive strength has the same tendency as the relationship between dynamic and static elastic modulus. The proposed relationship equations between dynamic elastic modulus and static elastic modulus or compressive strength properly estimates the variation of relationships according to cement type, temperature, and aging.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.13-20
• /
• 2005

This paper deals with flexural vibration techniques as a means of predicting bending strength properties for quarter-sawn and flat-sawn planes of red pine containing knots. Dynamic modulus of elasticity $(MOE_d)$ was calculated from resonance frequency obtained from the flexural vibration induced by a magnetic driver in quarter-sawn and flat-sawn planes of red pine containing knots. The dynamic MOE were well correlated to bending strength properties. Their correlation coefficients ranged from 0.866 to 0.800 for the regression between dynamic MOE and static bending MOE or MOR. The difference of the values between quarter-sawn and flat-sawn was very small. These values were higher than correlation between percentage of total knot diameter to total width of red pine specimen $(K_T(%))$ as well as $K_O(%)$ base upon ASTM D 3737 and static bending strength properties (correlation coefficient r = 0.448~0.704), and were similar to those between static bending MOE and bending MOR (r = 0.850). These results indicate that dynamic MOE obtained from resonance frequency induced by flexural vibration of magnetic driver is able to effectively use for predicting of static bending strength of red pine containing knots as well as static MOE.

• 화약ㆍ발파
• /
• 제37권1호
• /
• pp.14-23
• /
• 2019

암석이나 콘크리트와 같은 취성재료의 경우에는 역학적 강도의 하중속도 의존성을 보임에 따라 발파 및 충격해석에 있어 이를 반영코자 하는 노력이 증가하고 있다. 이와 같은 암석의 동적강도의 경우에는 순간적으로 높은 하중이 작용하는 동적하중의 가압특성에 따라 시험편 내의 응력평형상태를 고려한 평가가 수행되어야함이 제안된 바 있다. 본 연구에서는 스플릿 홉킨슨 압력봉 장비를 이용한 포천 화강암의 동적일축압축강도 실험을 통해 응력평형조건의 충족 유무에 따른 암석의 동적파괴과정 및 역학적 강도특성에 대해 고찰하였다. 연구결과 적절한 응력평형상태가 이루어지진 않은 상태에서 평가된 암석의 동적일축압축강도는 상대적으로 과소평가되는 것으로 나타났으며, 이는 하중의 가압면에서 발생하는 조기파괴에 따른 에너지 파괴에너지 손실 및 변형률속도 과대평가에 의한 것으로 판단되었다. 결론적으로 합리적인 동적강도 평가를 위해서는 암석의 변형거동특성에 대한 분석 및 파괴패턴에 대한 검토를 통한 응력평형조건의 세밀한 검증이 수반되어야 할 것으로 판단하였다.

• 항공우주시스템공학회지
• /
• 제4권3호
• /
• pp.1-5
• /
• 2010

Understanding the crushing behaviour of aluminum honeycombs under dynamic loading is useful for crash simulations of vehicles and for design of impacting energy absorbers. In the study of honeycomb crushing under quasi-static, dynamic loading, the most important parameter is crush strength. Crush strength is indicated to energy absorption characteristic of aluminum honeycomb. In this study, Using Finite Element Analysis carried out crush strength of hexagonal aluminum honeycomb then the results was compared with Quasi-static test. Consequently, Crush strength is different in quasi-static loading and dynamic loading about 16%.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.31-37
• /
• 2018

이 논문은 압축강도 수준(100, 140, 180 MPa급)에 따른 HPFRCC의 동적충격 인장강도를 평가하였다. 먼저 100, 140, 180 MPa급 HPFRCC의 압축응력-변형률 관계를 분석한 결과 압축강도는 각각 112, 150, 202 MPa로 나타났으며, 압축강도가 높아짐에 따라 탄성계수도 증가하는 경향을 나타내었다. 100, 140, 180 MPa급 HPFRCC의 정적 인장강도는 각각 10.7, 11.5, 16.5 MPa로 나타났으며, 압축강도가 높아질수록 인장강도도 증가하는 경향을 나타내었다. 반면 100 및 140 MPa급 HPFRCC에서의 인장강도 및 에너지 흡수능력은 압축강도 수준에 따라 큰 차이를 보이지 않았다. 이는 시험체의 규격 및 강섬유의 배열에 영향을 받은 것으로 판단된다. HPFRCC의 동적충격 인장강도를 평가한 결과, 변형률 속도가 10-1/s에서 150/s로 증가할수록 모든 HPFRCC의 인장강도와 동적증가계수는 증가하는 경향을 보였다. 한편 동일한 범위의 변형률 속도에서 HPFRCC의 압축강도가 낮을수록 인장강도에 대한 DIF가 높게 측정되어 효율적인 측면에서는 100 MPa급 HPFRCC가 가장 우수한 것으로 나타났다. 따라서 높은 수준의 인장성능이 요구되는 경우 높은 압축강도를 가지는 HPFRCC를 사용하는 것이 유리하며, 폭발과 같은 고속변형률 속도에서 보다 효율적인 접근을 위해서는 목표 압축강도에 근접한 HPFRCC를 사용하는 것이 바람직한 것으로 판단된다.

• 대한임상전기생리학회지
• /
• 제10권1호
• /
• pp.39-44
• /
• 2012

Purpose : This study purposed to analyze how dynamic stabilization exercise on an unstable surface, and static stabilization exercise on muscle strength and endurance. Methods : For this study we sampled 9 people for the unstable surface dynamic stabilization exercise group, 9 for the stable surface static stabilization exercise group, and 9 for the control group. In order to examine muscle strength and endurance, we measured changes in the maximal voluntary isometric contraction (MVIC) using a dynamometer before, 3 weeks after, and 6 weeks after the experiment. Results : First, with regard to change in muscle strength, flexion strength showed a significant change in interaction by time (p<0.05). Extension strength showed a significant change in interaction by time (p<0.05). Second, with regard to change in endurance, flexion endurance showed a significant change in interaction by time (p<0.05). Extension endurance showed a significant change in interaction by time (p<0.05). Conclusion : In conclusion, this study confirmed significant changes in interaction between the groups and by time with regard to changes in muscle strength and endurance. These results suggest the potential of surface dynamic stabilization exercise as a clinical intervention.