• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.85-97
• /
• 2000

In this paper, static and dynamic shift control stategies of CVT speed ratio are suggested. For the static shift control, in order to operate engine on the optimal operating region, a fuzzy control logic is used. In the fuzzy logic, S- factor that is defined as a degree of sportiness is introduced. Simulation results show that the static shift control strategy based on the fuzzy logic selects the optimal operating point automatically between the economy and the sporty mode corresponding to the driver's desire and the driving condition. For the dynamic shift control strategy, a shift speed map is suggested which determines the shift sped as fast or slow based on Δi, the difference between the desired speed ratio id and the actual speed ratio i, and throttle opening. It is seen from the simulation results that the CVT shift speed is determined by the dynamic shift control strategy to provide appropriate performance and comfort for the driver's demand and driving condition. Additionally, experiments are performed to investigate the dynamic performance of the shift speed for the lift foot up. From the experimental results, it is found that improved shift feeling can be obtained by the dynamic shift control strategy when lift foot up occurs.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.34-44
• /
• 2018

This paper presents a pulse-width adjustment (PWA) strategy for a novel bidirectional DC-DC boost converter to improve the performance of the dynamic inductor current response. This novel converter consists of three main components: a full-bridge converter (FBC), a high-frequency isolated transformer with large leakage inductance, and a three-level voltage-doubler rectifier (VDR). A number of scholars have analyzed the principles, such as the soft-switching performance and high-efficiency characteristic, of this converter based on pulse-width modulation plus phase-shift (PPS) control. It turns out that this converter is suitable for energy storage applications and exhibits good performance. However, the dynamic inductor current response processes of control variable adjustment is not analyzed in this converter. In fact, dc component may occur in the inductor current during its dynamic response process, which can influence the stability and reliability of the converter system. The dynamic responses under different operating modes of a conventional feedforward control are discussed in this paper. And a PWA strategy is proposed to enhance the dynamic inductor current response performance of the converter. This paper gives a detailed design and implementation of the PWA strategy. The proposed strategy is verified through a series of simulation and experimental results.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.1
• /
• pp.259-268
• /
• 2020

The purpose of this study is to examine the predictive effects of intuition, business analytic, networking capabilities on innovation performance. The data was collected using a cross-sectional quantitative survey. A total of 292 useable responses were collected from Thai Processed Food Exporters (TPFE). The findings also indicated that the hypothesized relationships between the independent and dependent variables fit the empirical data. Specifically, it is revealed that strategic intuition, business analytic capabilities, network-based capabilities and dynamic capabilities had a direct effect on dynamic strategy. They also had statistically significant direct and indirect effects on dynamic performance. Based on the results of the correlation test, the researchers developed a dynamic capability model for the development of the dynamic performance of the operators, which included concepts, principles, methods, tools and guidelines. Furthermore, the impacts of intuition, business analytic, networking capabilities on dynamic strategy are also examined in this study. It makes a considerable contribution to the existing literature on dynamic strategy of TPFE, particularly in regards to explaining the performance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.4
• /
• pp.202-208
• /
• 2002

In a dynamic game where the players move in a periodical sequence, each player observes the strategy of the others. So the players who move later in a game get to know the moves of others having made before them. Those who move earlier must take this into account in devising their optimal strategy. In the Poolco model, the bidding game is executed periodically. The player participating in the bidding game accumulates the information of its own and others'strategies, and payoffs through the repeated bidding process. Thereby, the players in this game would be able to map out how get the maximum profit, and get closer to the optimal strategy. This paper presents a mathematical modeling for a player to determine his or her optimal strategy at period T, based on the information acquired from the previous rounds for the periods, T-1, T-2, and so on. The proposed modeling is demonstrated with a dynamic fame theory.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.155-164
• /
• 2018

Design of structures subjected to blast loads are usually carried out through nonlinear inelastic dynamic analysis followed by imposing acceptance criteria specified in design codes. In addition to comprehensive aspects of inelastic dynamic analyses, particularly in analysis and design of structures subjected to transient loads, they inherently suffer from convergence and computational cost problems. In this research, a strategy is proposed for design of steel moment resisting frames under far range blast loads. This strategy is inspired from performance based seismic design concepts, which is here developed to blast design. For this purpose, an algorithm is presented to calculate the capacity modification factors of frame members in order to simplify design of these structures subjected to blast loading. The present method provides a simplified design procedure in which the linear dynamic analysis is preformed, instead of the time-consuming nonlinear dynamic analysis. Nonlinear and linear analyses are accomplished in order to establish this design procedure, and consequently the final design procedure is proposed as a strategy requiring only linear structural analysis, while acceptance criteria of nonlinear analysis is implicitly satisfied.

• East Asian Economic Review
• /
• v.25 no.3
• /
• pp.310-336
• /
• 2021

We use iterative numerical procedures combined with analytical methods due to Rapach and Wohar (2009) to solve for the dynamic asset allocation strategy for optimal portfolio demand. We compare different optimal portfolio demands when investors in each country have different access to overseas and domestic investment opportunities. The optimal dynamic asset allocation strategy without foreign investment opportunities leads domestic investors in Korea, Hong Kong, and Singapore to allocate more funds to domestic bonds than to domestic stocks. However, the U.S. investors allocate more wealth to domestic stocks than to domestic bonds. Investors in all countries short bills at a low level of risk aversion. Next, we investigate dynamic asset allocation strategy when domestic investors in Korea have access to foreign markets. The optimal portfolio demand leads investors in Korea to allocate most resources to domestic bonds and foreign stocks. On the other hand, the portfolio weights on foreign bonds and domestic stocks are relatively low. We also analyze dynamic asset allocation strategy for the investors in the U.S., Hong Kong, and Singapore when they have access to the Korean markets as overseas investment opportunities. Compared to the results when the investors only have access to domestic markets, the investors in the U.S. and Singapore increase the portfolio weights on domestic stocks in spite of the overseas investment opportunities in the Korean markets. The investors in the U.S., Hong Kong, and Singapore short domestic bills to invest more than initial funds in risky assets with a varying degree of relative risk aversion coefficients without exception.

• The Journal of Information Technology
• /
• v.8 no.2
• /
• pp.59-76
• /
• 2005

The purpose of this study is to identify types of dynamic manufacturing strategies and their effects on business performance. Three characteristics of Korean manufacturing should be noted. First, it is found that there are six types of dynamic manufacturing strategies in Korea. Second, the roles of the infrastructural and structural action programs become different according to different types of dynamic manufacturing strategies. Third, the strategy of continuously fostering both cost leadership and differentiation capabilities has turned out to be very effective in Korea.

• Wind and Structures
• /
• v.8 no.1
• /
• pp.35-48
• /
• 2005

Wind loading is very important in structural design of large-span single-layer reticulated shell structures. In this paper, a geometrically nonlinear wind-induced vibration analysis strategy for large-span single-layer reticulated shell structures based on the nonlinear finite element method is introduced. According to this strategy, a computation program has been developed. With the information of the wind pressure distribution measured simultaneously in the wind tunnel, nonlinear dynamic analysis, including dynamic instability analysis, for the wind-induced vibration of a single-layer reticulated shell is conducted as an example to investigate the efficiency of the strategy. Finally, suggestions are given for dynamic wind-resistant analysis of single-layer reticulated shells.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1302-1310
• /
• 1997

In this paper, we propose a dynamic code allocation strategy using voice activity detection and evaluate the performance of a dynamic code allocation strategy using voice activeity detection in DS-CDMA system. Proposed method allocates code to mobile terminal according to the residual capacity computed by SIR in the base station. In hot spot traffic loading cell, we find that the performance of proposed method is better than that of a fixed code assignment strategy using voice activity detection. Also, we find that the proposed method provide much improvement in blocking probability against the dynamic code assignment strategy withoug voice activity detection.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.297-309
• /
• 1999

Resource Constrained Dynamic Multi-Projects Scheduling(RCDMPS) is intended to minimize the total processing time(makespan) of two or more projects sequentially arriving at the shop under restricted resources. The aim of this paper is to develop the new Tabu Search heuristic for RCDMPS to minimize makespan. We propose the insertion method to generate the neighborhood solutions in applying the Tabu Search for the RCDMPS and the diversification strategy to search the solution space diversely. The proposed diversification strategy apply the dynamic tabu list that the tabu list size is generated and renewed at each iteration by the complexity of the project, and change the proposed tabu attribute. In this paper, We use the dynamic tabu list for the diversification strategy and intensification strategy in the tabu search, and compare with other dispatching heuristic method to verify that the new heuristic method minimize the makespan of the problem.