• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.95-109
• /
• 2020

본 연구에서는 휴대형 동적콘관입시험(DCPT)을 활용하여 손상된 보강토옹벽의 피해원인을 규명하고 대책방안을 마련한 총 6곳의 현장사례를 검토하여 휴대형 동적콘관입시험의 현장 적용성을 평가하였다. 현장에서는 하부 로트의 결합 연장을 통하여 6m 이상의 지반조사가 가능하도록 개량된 동적콘관입시험기를 사용하였으며, 그 결과를 표준관입시험 결과와 비교하여 상관 관계를 분석하였다. 다양한 현장 적용사례 분석을 통하여, 휴대형 동적콘관입시험이 손상된 보강토옹벽 현장에서의 적용이 매우 편리하며, 연속적으로 개략적인 지반강성을 파악하여 옹벽의 피해원인을 규명하고 안정성을 확인하는데 큰 역할을 할 수 있음을 알 수 있었다. 또한, 동적콘관입시험 및 표준관입시험 결과를 비교, 분석해 본 결과, 사질토 지반에서는 N≒(1/3~2/3)·Nd 정도의 상관관계가 나타남을 알 수 있었다.

• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.363-370
• /
• 2020

In this study, pitching stability derivatives of the conical shell configuration is predicted using commercial CFD code. Unsteady flow analysis with forced harmonic motion of the model is performed using overset mesh. The test is conducted about Basic finner missile configuration. The static and dynamic stability derivatives are good agreement with available experimental data. As the same way, a conical shell is analyzed in Mach number 1.6 and various reduced frequency. The static and dynamic derivatives are obtained from the time-pitching moment coefficient histories in each of four cases of mean angle of attack. The variation of reduced frequency is not affected static and dynamic derivatives. Increasing the mean angle of attack, static derivatives are increased slowly. Comparison of the Cm curves at the steady and unsteady state results shows that the Cm curve including the damping effect is lower than otherwise case, approximately 9-18 %.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.53-58
• /
• 2018

The modern industry requires the precision machining as well as the high productivity. The machine tool structure should be evaluated in aspects such as durability, static stability, precision rate and the dynamic stability which is one of the most critical characteristics in determining the magnitude of vibrations. In this study, the dynamic properties of a pipe cutting machine were investigated to analyze the structural vibrations of the machine, and further to improve the structural stability and precision machining. Frequency response test and computer simulation have been utilized for the analysis and the design alterations. And the result shows that proposed design alterations can reduce the vibrations of the machine substantially.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.402-410
• /
• 2013

In this paper, a novel and robust Power System Stabilizer (PSS) is proposed as an effective approach to improve stability in electric power systems. The dynamic performance of proposed PSS has been thoroughly compared with Conventional PSS (CPSS). Both the Real Coded Genetic Algorithm (RCGA) and Particle Swarm Optimization (PSO) techniques are applied to optimum tune the parameter of both the proposed PSS and CPSS in order to damp-out power system oscillations. Due to the high sufficiency of both the RCGA and PSO techniques to solve the very non-linear objective, they have been employed for solution of the optimization problem. In order to verify the dynamic performance of these devices, different conditions of disturbance are taken into account in Single Machine Infinite Bus (SMIB) power system. Moreover, to ensure the robustness of proposed PSS in damping the power system multi-mode oscillations, a Multi Machine (MM) power system under various disturbances are considered as a test system. The results of nonlinear simulation strongly suggest that the proposed PSS significantly enhances the power system dynamic stability in both of the SMIB and MM power system as compared to CPSS.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.141-145
• /
• 2004

The objective of the present study is to conduct model combustion tests for various injectors to identify their combustion stability characteristics. Three different double swirl coaxial injectors with variation of a recess length have been tested for the comparative study of CH flame structure and dynamic characteristics. Gaseous oxygen and mixture of gaseous methane and propane have been employed for simulating actual propellants used for a full-scale thrust chamber. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1550-1556
• /
• 2009

The sophisticated technologies, ensuring both stability and curving performance, are required for the medium high speed train running on conventional railway line where tangent and curved section mixed together. We can hardly meet the both requirements conflicting each other with the conventional type of bogie. Effective solution is to apply stabilizing mechanism for the bogie design, which increase hunting stability or dynamically critical speed while maintaining curving performance. In this research the numerical analysis by means of multi-body dynamic simulation S/W, experiments by using roller test rig and main line running test have been comprehensively performed for the 200km/h Korean Tilting Train with newly developed stabilizer. The paper proposes the effectiveness of stabilizer and its usefulness based on the results of analyses.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.22-29
• /
• 2015

Quadrotor is widely used in variable application nowadays. Due to its inherent unstable characteristics, control system to augment the stability is essential for quadrotor operation. To design control system and verify its performance through simulation, accurate dynamic model is required. Quadrotor dynamic model is simply compared with conventional rotorcraft such as helicopter. However, the accurate dynamic model of quadrotor is not easy to develop because of the highly correlated aerodynamic effect of each rotor. In this paper, quadrotor dynamic model is identified from the flight data using frequency domain approach. Flight test of quadrotor is performed in closed loop configuration with stability augmentation system included. Frequency sweep input is applied in each of lateral, longitudinal, yaw and heave axis separately. The bare dynamic model is identified from the flight data of quadrotor responses and thrust measurement through Pulse Width Modulation(PWM) data. The frequency responses of identified model match well with those of flight data, and time responses of identified model for doublet input in each axis are also shown to agree with flight data.

• 한국전문물리치료학회지
• /
• 제28권1호
• /
• pp.47-52
• /
• 2021

Background: Compared with normal people, stroke patients have decreased voluntary craniocervical motion, which affects their balance. Objects: This study was conducted in order to examine the effects of active craniocervical movement training using a cognitive game on stroke patient's cervical movement control ability, balance, and functional mobility. Methods: The subject of this study were 29chronic stroke patients who were randomly allocated to either an experimental, cognitive game group (n = 15), or control group (n = 14), to which only neuro-developmental treatment (NDT) was applied. The intervention was conducted 5 times per week, 30 minutes per each time, for a total of 4 weeks. Active angle reproduction test, static stability test, limits of stability test, and Time up and Go (TUG) test, respectively, were carried out in order to evaluate cervical movement control ability, static balance, dynamic balance, and functional mobility. Paired t-test was used in order to compare differences between prior to after the intervention, along with an independent-test in order to compare prior to and after-intervention differences between the two groups. Results: After the craniocervical training with a body-driven cognitive game, the experimental group showed significant differences in flexion, extension, and lateral flexion on the affected side, and rotation on the affected side in the active angle reproduction test. The experimental group indicated significant differences in sway length both with eyes-open and with eyesclosed in the static stability test and in limits of stability test and TUG test. The control group to which NDT was applied had significant differences in flexion in the active angle reproduction test and in limits of stability test and TUG test. Conclusion: The above results mean that craniocervical training using a body-driven cognitive game positively influences stroke patient's cervical movement control ability and as a result their balance and functional mobility.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.700-705
• /
• 2003

The object of this study is to ensure the stability of flat freight cars using vibration performance test and static load test of body structures. We examined the flat car though static load test and dynamic characteristics analysis related traveling stability and vibration performance. In the results of static load test of body structures for flat car, all structures satisfied allowable stress of materials. The vibration performance test was satisfied with allowable standards. Although flat car exceed speed a little at some speed interval, it was estimated that the cause was not cars but rail.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1389-1397
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced nitration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been increased recently in order to analyze the effect of the blast-Induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure corves estimated tv theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a dynamic distinct element analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast. Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced nitration and the stability of rock slope.