• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.433-455
• /
• 2005

Fritz John, and Karush-Kuhn-Tucker type optimality conditions for a constrained variational problem involving higher order derivatives are obtained. As an application of these Karush-Kuhn-Tucker type optimality conditions, Wolfe and Mond-Weir type duals are formulated, and various duality relationships between the primal problem and each of the duals are established under invexity and generalized invexity. It is also shown that our results can be viewed as dynamic generalizations of those of the mathematical programming already reported in the literature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.160-163
• /
• 1996

This paper deals with MCMBPC(Multivariable Constrained Model Based Predictive Controller) for nonlinear boiler system with noise and disturbance. MCMBPC is designed by linear state space model obtained from some operating point of nonlinear boiler system and Kalman filter is used to estimate the state with noise and disturbance. The solution of optimization of the cost function constrained on input and/or output variables is achieved using quadratic programming, viz. singular value decomposition (SVD). The controller designed is shown to have excellent tracking performance via simulation applied to nonlinear dynamic drum boiler turbine model for 16OMW unit.

• 대한전기학회논문지
• /
• 제35권12호
• /
• pp.594-602
• /
• 1986

This paper proposes an effective algorithm for short-term generation scheduling for the purpose of economic and secure operation of thermal power systems. Especially, in the procedure of solution by Dynamic Programming, Linear Programming is introduced to promote the possibility of optimal solution and the security of power systems, and evaluation of security function is improved by the application of seven step approximation of normal distribution. Several necessary considerations, that is, time dependent start-up and constant down cost of generating units, demand and spinning reserve constraints, minimum up and sown time constraints, the number of possible start-up of a generating unit in a d and the number of generating units which can be started up at the same time at the same bus, are also incoporated to elevate the usability and flexibility of the algorithm. Finally, the effectiveness of the proposed algorithm has been demonstrated by applying to the 6-gen. 21-bus model power system.

• Journal of applied mathematics & informatics
• /
• 제27권1_2호
• /
• pp.123-137
• /
• 2009

A multiobjective variational problem involving higher order derivatives is considered and Fritz-John and Karush-Kuhn-Tucker type optimality conditions for this problem are derived. As an application of Karush-Kuhn-Tucker optimality conditions, Wolfe type dual to this variational problem is constructed and various duality results are validated under generalized invexity. Some special cases are mentioned and it is also pointed out that our results can be considered as a dynamic generalization of the already existing results in nonlinear programming.

• Industrial Engineering and Management Systems
• /
• 제13권1호
• /
• pp.29-42
• /
• 2014

Extensive research has been conducted on supplier evaluation and selection as a strategic and crucial component of supply chain management in recent years. However, few articles in the previous literature have been dedicated to the use of fuzzy inference systems as an aid in decision-making. Therefore, this essay attempts to demonstrate the application of this method in evaluating suppliers, based on a comprehensive framework of qualitative and quantitative factors besides the effect of gradual coverage distance. The purpose of this study is to investigate the applicability of the numerous measures and metrics in a multi-objective optimization problem of the supply chain network design with the aim of managing the allocation of orders by coordinating the production lines to satisfy customers' demand. This work presents a dynamic non-linear programming model that examines the important aspects of the strategic planning of the manufacturing in supply chain. The effectiveness of the configured network is illustrated using a sample, following which an exact method is used to solve this multi-objective problem and confirm the validity of the model, and finally the results will be discussed and analyzed.

• 한국국방경영분석학회지
• /
• 제18권2호
• /
• pp.66-95
• /
• 1992

Shortest paths are one of the simplest and most widely used concepts in deterministic networks. A decison of troops movement route can be analyzed in the network with a shortest path algorithm. But in reality, the value of arcs can not be determined in the network by crisp numbers due to imprecision or fuzziness in parameters. To account for this reason, a fuzzy network should be considered. A fuzzy shortest path can be modeled by general fuzzy mathematical programming and solved by fuzzy dynamic programming. It can be formulated by the fuzzy network with lingustic variables and solved by the Klein algorithm. This paper focuses on a revised fuzzy shortest path algorithm and an application is discussed.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.582-587
• /
• 1997

This paper deals with the control problem under nonlinear boiler systems with noise, and input constraints. MCMBPC(Multivariable Constrained Model-Based Predictive Controller) proposed by Wilkinson et al.[10,11] is used and nominal model is modified in this paper in order to applied to nonlinear boiler systems with feed-forward terms. The solution of the cost function optimization constrained on input and/or output variables is achieved using quadratic programming, via singular value decomposition(SVD). The controller designed is shown to satisfy the constraints and to have excellent tracking performance via simulation applied to nonlinear dynamic drum boiler turbine model for 16OMW unit.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제10권2호
• /
• pp.11-25
• /
• 2006

현재 RFID 미들웨어의 표준은 RFID 표준을 주도하고 있는 EPCglobal의 ALE(Application Level Event) 이며 시스템 인프라스트럭처에 독립적으로 운영 될 수 있도록 최소한의 인터페이스와 확장점 만을 제시하고 있다. 그러나 확장점을 통한 기능의 확장에 대한 부분은 표준화 되어 있지 않으며 운영중에 있는 시스템에 적용하기 위해서는 새로운 코드를 추가 하거나 변경해야 하는 문제점이 있다. 본 논문에서는 이러한 문제점 해결을 위해 AOP(Aspect Oriented Programming) 기법을 도입한 동적 ALE 미들웨어 프레임워크를 제시하고 이를 구현하기 위한 애스펙트를 설계했다. 설계된 미들웨어 프레임워크 및 애스펙트는 동적인 기능의 확장을 제공해 기존 ALE 기반 미들웨어의 기능확장에 따르는 유지보수의 어려움을 해결하고 표준화된 방법으로 새로운 기능을 추가할 수 있다.

• ETRI Journal
• /
• 제18권4호
• /
• pp.265-286
• /
• 1997

This paper presents a new software development environment that supports an integrated methodology for covering all phases of software development and gives integrated methods with tools for ITUT (Telecommunication Standardization Section of the International Telecommunication Union) languages. The design of the environment to improve software productivity and quality is based on five main concepts: 1) formal specifications based on SDL (Specification and Description Language) and MSC (Message Sequence Charts) in the design phase, 2) verification and validation of those designs by tools, 3) automatic code generation and a safe separate compilation scheme based on CHILL (CCITT High-Level Language) to facilitate programming-in-the-many and programming-in-the-large. 4) debugging of distributed real-time concurrent CHILL programs, and 5) simulation of application software for integrated testing on the host machine based on CHILL. The application results of the environment compared with other approaches show that the productivity is increased by 19 % because of decreasing implementation and testing cost, and the quality is increased by 83 % because of the formal specifications with its static and dynamic checking facilities.

• 한국정보처리학회논문지
• /
• 제4권5호
• /
• pp.1182-1195
• /
• 1997

멀티미디어 저작도구를 이용한 응용 프로그램 개발에 있어서, 기존의 저작도구를 멀티미디어 툴북의 경우 객체들이 사건을 기반으로 하는 상태 변환 방식을 사용하므로 프리젠테이션 을 자동으로 가능하게 할 수 있는 기능을 제공하지 못한다. 본 연구에서는 객체의 자동 변환 기법을 통하여 자동 프리젠테이션 기능을 멀티미디어 저작도구가 시스템 DLL(Dynamic Link Library) 형태로 제공하도록 하기 위한 객체 자동 변환기법을 개발하고자 이를 멀티미디어 툴복의 페이지 전환 및 미디어 제어 인터 페이스를 이용하여 오디오 자원의 상태 변환 기능을 추가하여 멀티미디어 저작도구의 기능 확정이 가능하게 하였다.