• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.110-119
• /
• 1998

Dynamic cutting force variations in milling process were measured indirectly using spindle motor current. Magnitude of the spindle motor current is independent of cutting direction. Quasi-static sensitivity of the spindle motor current is higher than that of the feed motor current. Dynamic sensitivity of the spindle motor current is lower but cutting force was correctly represented by spindle RMS current in rough milling. In rough milling, chipping and tool fracture were well detected by the proposed tool fracture index using spindle motor current.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.620-624
• /
• 2011

In recent years, the study of self-assembly peptide used in drug delivery system has been attracted great interest from scientists. In the category are self-assembly peptides in the structure either with one hydrophobic surface and another hydrophilic or a hydrophobic head and a hydrophilic tail. Here, we focus on a novel designed peptide EYK with double amphiphilic surfaces, investigating on the capability of peptide as a carrier for hydrophobic compound model pyrene. The fluorescence data presented the dynamic process of the transfer, showing that the pyrene was in the crystalline form in peptide solution, and molecularly migrated from its peptide encapsulations into the membrane bilayers when the peptide-pyrene suspension was mixed with liposome vesicles. The results indicated that the peptide EYK could stabilize hydrophobic pyrene in aqueous solution and delivered it into EPC liposome as a potential carrier.

• 대한전자공학회논문지TE
• /
• 제37권2호
• /
• pp.62-68
• /
• 2000

동적채널할당 방식은 채널 이용 효율을 극대화시킬 수 있다는 장점은 있으나 채널을 최종적으로 가입자에게 할당 해주기 위해서는 여러 단계의 연산 과정을 수행해야 한다. 이로 인해 시스템 제어가 복잡해지고, 채널할당 시까지 필요로 하는 시간이 길어 전체 시스템 성능에 영향을 미치는 단점을 갖는다. 본 논문에서는 동적채널할당 방식을 적용하고자 할 때 가장 문제가 되는 채널할당 시까지 필요로 하는 제어 단계를 단순화시킬 수 있는 트래픽 제어 알고리즘을 제안한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.11-15
• /
• 1999

Monitoring of the cutting force signals in cutting process has been well emphasized in machine tool communities. Although the cutting force can be directly measured by a tool dynamometer, this method is not always feasible because of high cost and limitations in setup. In this paper an indirect cutting force monitoring system is developed so that the cutting force in turning process is estimated based on a AC spindle drive model. This monitoring system considers the cutting force as a disturbance input to the spindle drive and estimates the cutting force based on the inverse dynamic model. The inverse dynamic model represents the dynamic relation between the cutting force, the motor torque and the motor power. The proposed monitoring system is realized on a CNC lathe and its estimation performance is evaluated experimentally.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.13-19
• /
• 2012

There are many dynamic properties in measured end-milling force. So, it is difficult to predict the real static property of end-milling force. Also the behavior of end-milling force is very complex to predict with the measured one. To extract the static property from measured force, it must be filtered and its problem is closely related to a de-noising one. Also this paper presents alternative de-noising method of end-milling force using wavelet filter bank, based on the wavelet transform and its inverse one. In this paper, by comparing the measured force and its wavelet filtered one, the fundamental end-milling force property after wavelet transform is well reviewed and analyzed. This result of wavelet filtering with filter bank shows the static force of end-milling which has severe dynamic properties occurring in entry and exit state of edge emersion into the workpiece.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.138-146
• /
• 2012

This research is to analyze the wave propagation characteristics of anisotropic materials subjected to the low-velocity impact. For this purpose, a higher-order finite element program is used to simulate the dynamic behaviors according to the changes of material property, stacking sequence and dimension etc.. Materials for simulation are composed of $[0^{\circ}]_{10s}$, $[45^{\circ}/-45^{\circ}]_{5s}$ and $[90^{\circ}]_{10s}$ stacking sequences. Finally, the results of this simulation are compared with those of wave propagation theory and then the impact responses and wave propagation phenomena are investigated.

• 소성∙가공
• /
• 제8권3호
• /
• pp.306-312
• /
• 1999

In the recent sheet metal forming simulations, it increases to adopt the dynamic explicit method for an effective computation and the elastoplastic formulation for stress recovery. It is inevitable in the dynamic explicit method that some noises occur, which sometimes partly spoil results of simulations. This phenomenon becomes severer when complicate contact conditions are included in simulations. In commercial dynamic codes, the concept of contact damping is introduced. However, the formulation process of it is not revealed well. In this paper, a contact damping method is formulated in order for effectively suppressing noises occurring due to complicated contact conditions. This is checked by analyzing a simple sheet metal stamping process (U-draw bending). From the computational results, it is shown that the contact damping can effectively control the noises due to contacts, especially when considering the sheet thickness, and help to develop more reliable internal stress states, which result in more realistic shapes after springbank.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.17-22
• /
• 2006

In the manufacturing processes of semiconductor, test process is important for quality of products. In the manufacturing process of dynamic memory, memory test is more important. So, automatic test equipment(ATE) is used necessarily. But, according to increase of speed of dynamic memory operation, the rapid test equipment is needed. Impedance matching between ATE and dynamic memory is expected to be an important problem for making a rapid test equipment over 1Gbps. According to increase of speed, inner impedance of ATE also works on important parameter for test. This paper is about the method that is for impedance matching of inner impedance and coaxial cable occurring in manufacturing of ATE. We proved effects of inner impedance by electric theory and verified the method of impedance matching using computer simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1557-1565
• /
• 2009

According to the GM/RT2141, to assess the safety of vehicle, the validated the vehicle dynamic model should be applied. The validation of the vehicle model is against the static test, some kind of vehicle type test results have been used to determine the suspension characteristics and the vehicle dynamic characteristics. To validate the vehicle model and the test results, first the test results has been analysed as to specified the suspension characteristics and than the parameters to related with the test result has to be adjusted to show the same results of the test. In this process the parameters of vehicle model have been determined to show the coherence of the two results of the simulation and the test by trial & error. In this report, the optimization tool has been introduced in this model validation process and shows the efficient and well validated model.

• 한국통신학회논문지
• /
• 제26권10A호
• /
• pp.1756-1763
• /
• 2001

In this paper, we propose an ATM-LAN IWU(interworking unit) with threshold based dynamic bandwidth allocation scheme. We analyze a discrete-time based finite queueing model with deterministic service times in order to investigate the performance of the proposed scheme. It is known that the arrival process of IP packets is bursty. So we use an MMPP(Markov Modulated Poisson Process) to model the bursty input traffic. As performance measures, we obtain the packet loss probability and the mean packet delay. We present some numerical results to show the effects of the thresholds on the performance of the DBAS(dynamic bandwidth allocation scheme).