• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1672-1677
• /
• 2004

Leading edge extension(LEX) in a highly swept shape applied to a delta wing features the modem air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present 3-D stereo PIV includes the Identification of 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterion and so on. A delta wing model with or without LEX was immersed in a circulating water channel. Two high-resolution, high-speed digital cameras($1280pixel{\times}1024pixel$) were used to allow the time-resolved animation work. The present dynamic stereo PIV represents the complicated vortex behavior, especially, in terms of time-dependent characteristics of the vortices at given measuring sections. Quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing to make the easy understanding of the LEX effect or vortex emerging and collapse which are important phenomena occurring in the field of delta wing aerodynamics.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.305-312
• /
• 2011

A primary interest of this work is to develop an efficient and powerful repetitive pulser system for the application of ultra wide band generation. The important component of the pulser system is a small-sized coaxial type spark gap with planar electrodes filled with SF6 gas. A repetitive switching action by the coaxial spark gap generates two consecutive pulses in less than a microsecond with rise times of a few hundred picoseconds (ps). A set of several parameters for the repetitive switching of the spark gap is required to be optimized in charging and discharging systems of the pulser. The parameters in the charging system include a circuit scheme, circuit elements, the applied voltage and current ratings from power supplies. The parameters in the discharging system include the spark gap geometry, electrode gap distance, gas type, gas pressure and the load. The characteristics of the spark gap discharge, such as breakdown voltage, output current pulse and recovery rate are too dynamic to control by switching continuously at a high pulse repetition rate (PRR). This leads to a low charging efficiency of the spark gap system. The breakthrough of the low charging efficiency is achieved by a parallel operation of two spark gaps system. The operational behavior of the two spark gaps system is presented in this paper. The work has focused on improvement of the charging efficiency by scaling the PRR of each spark gap in the two spark gaps system.

• 경영과정보연구
• /
• 제4권
• /
• pp.349-374
• /
• 2000

With rapid advances on Interactive technology, and the growing popularity of the Internet, Internet shopping receives considerable attention in both the popular-press and academic journals. The Internet has enormous commercial possibilities. But it is a new and dynamic medium that poses special challenges for marketers. The revolutionary nature of the Internet mandates that established wisdom on consumer marketing along with marketing-mix strategies has to be reexamined and perhaps radically revised. In order to assist marketers in this endeavor it is critical to understand consumers' buying behaviors of Internet shopping. But research in this area still very much its infancy. This study examined previous researches of Internet shopping and developed conceptual framework of Internet shopping modes. Additionally, this study examined empirical investigation of Internet shopping. Preliminary results suggests that there are significant differences in individuals' perceptions of Internet shopping and traditional shopping modes. Various factors influences on consumers' buying behavior on Internet shopping. There are Individuals' factors(personality, lifestyle, prior experience, perceived risk etc), shopping mall factors(trust, vividness, security, promotion, etc), product characteristics(product category, brand, etc), situational factors(time pressure, locational constraints etc), social/cultural factors(Norms, importance of other peoples etc). Additionally, We conducted empirical study of the impact of the Internet on consumer shopping behavior. We gathered consumers' reactions via an open-ended survey using a sample of 90 shoppers. We related the reactions to the factors of consumers' satisfaction or dissatisfaction of the Internet shopping. Consequently, there are many questions regarding factors that might influence Internet shopping. From theoretical and practical perspectives, studies that examine these factors would seem to offer much to the discipline. This paper has attempted th provide insights and direction of future empirical examination of Internet shopping.

• 천문학회보
• /
• 제37권2호
• /
• pp.116.1-116.1
• /
• 2012

When an interplanetary (IP) shock passes over the Earth's magnetosphere, the geosynchronous magnetic field strength near the noon is always enhanced, while the geosynchronous magnetic field near the midnight decreases or increases. In order to understand what determines the positive or negative magnetic field response at nightside geosynchronous orbit to sudden increases in the solar wind dynamic pressure, we have examined 120 IP shock-associated sudden commencements (SC) using magnetic field data from the GOES spacecraft near the midnight (MLT = 2200~0200) and found the following magnetic field perturbation characteristics. (1) There is a strong seasonal dependence of geosynchronous magnetic field perturbations during the passage of IP shocks. That is, the SC-associated geosynchronous magnetic field near the midnight increases (a positive response) in summer and decreases (a negative response) in winter. (2) These field perturbations are dominated by the radial magnetic field component rather than the north-south magnetic field component at nightside geosynchronous orbit. (3) The magnetic elevation angles corresponding to positive and negative responses decrease and increase, respectively. These field perturbation properties can be explained by the location of the cross-tail current enhancement during SC interval with respect to geosynchronous spacecraft position.

• 항공우주기술
• /
• 제1권1호
• /
• pp.163-172
• /
• 2002

액체로켓용 터보펌프시스템의 주요한 구성품의 하나로서 고압 터보펌프의 구동에 사용되는 터빈시스템 설계에 대한 연구가 수행되었다. 터빈시스템은 가스발생기에서 발생된 고온/ 고압의 연소가스의 운동에너지를 펌프를 구동시킬 수 있는 기계적 에너지로 전환하는데, 노즐을 통해 연소가스의 운동 에너지를 증가시켜 펌프와 동일 축으로 연결된 동익을 회전시킨다. 액체로켓엔진의 시스템설계의 결과로 주어지는 압력비, 일량, 입구온도, 입구압력 등의 요구조건하에, 이를 만족시키는 터빈 시스템(노즐 및 동익)의 설계연구가 수행되었다. 터빈시스템은 입/ 출구 압력비에 따라서 개방형(Open Type)과 밀폐형(Closed Type)으로 나눌 수 있는데, 개방형의 경우 높은 압력비와 소량의 유량을 필요로 하며 충격형(Impulse Type)의 동익이 사용되며, 낮은 압력비와 다량의 유량을 필요로 하는 밀폐형의 경우 반동형(Reaction Type)의 동익이 사용된다. 시스템의 단순화 및 효율화를 위해서 본 연구에서는 개방형 터빈시스템이 채택되었으며, 특히 개방형 터빈의 특징인 소량의 유량이 터빈을 구동하므로 효율을 증가시키기 위해서 부분분사노즐(Partial Admission Nozzle)이 채택되었으며, 이의 효율에 미치는 영향이 연구되었다. 공기역학적 이론과 실험에 근거한 이론이 사용되었으며, 차후에 항공우주연구원에서 터빈 상사시험을 통하여 본 연구에 적용된 설계를 검증하고자 한다.

• 한국추진공학회지
• /
• 제24권1호
• /
• pp.34-46
• /
• 2020

직사각형 초음속 노즐의 3차원 역유동 추력벡터 제어 시스템에 대한 공기역학적 특성을 조사하기 위하여 수치해석을 수행하였다. 이 초음속 노즐은 특성곡선법에 의하여 설계되었으며, 그 설계 마하수는 2.5이다. 2차 유동 덕트의 갭 높이를 변수로 하여 역유동 추력벡터 제어 시스템의 성능을 조사하였다. 상부 흡입 칼라의 중심선을 따르는 정압 분포, 편향각, 2차 질량유량비 및 합성 추력계수와 같은 주요 매개변수가 정량적으로 분석되었다. 또한 전체 유동장의 특성을 알아보기 위하여 대칭 평면에서의 유선, 3차원 등마하수분포 및 3차원 난류에너지분포를 조사하였다.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.246-258
• /
• 2016

The shield building of AP1000 was designed to protect the steel containment vessel of the nuclear reactor. Therefore, the safety and integrity must be ensured during the plant life in any conditions such as an earthquake. The aim of this paper is to study the effect of water in the water tank on the response of the AP1000 shield building when subjected to three-dimensional seismic ground acceleration. The smoothed particle hydrodynamics method (SPH) and finite element method (FEM) coupling method is used to numerically simulate the fluid and structure interaction (FSI) between water in the water tank and the AP1000 shield building. Then the grid convergence of FEM and SPH for the AP1000 shield building is analyzed. Next the modal analysis of the AP1000 shield building with various water levels (WLs) in the water tank is taken. Meanwhile, the pressure due to sloshing and oscillation of the water in the gravity drain water tank is studied. The influences of the height of water in the water tank on the time history of acceleration of the AP1000 shield building are discussed, as well as the distributions of amplification, acceleration, displacement, and stresses of the AP1000 shield building. Research on the relationship between the WLs in the water tank and the response spectrums of the structure are also taken. The results show that the high WL in the water tank can limit the vibration of the AP1000 shield building and can more efficiently dissipate the kinetic energy of the AP1000 shield building by fluid-structure interaction.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.515-522
• /
• 2019

Since Liquefied Natural Gas (LNG) is normally carried at 1.1 bar pressure and at -163℃, special Cargo Containment System (CCS) are used. As LNG carrier is becoming larger, typical LNG insulation systems adopt a method to increase the thickness of insulation panel to reduce sloshing load and Boil-off Rate (BOR). However, this will decrease LNG cargo volume and increase insulation material costs. In this paper, silica aerogel, glass bubble were synthesized in polyurethane foam to increase volumetric efficiency by improving mechanical and thermal performance of insulation. In order to increase dispersibility of particles, ultrasonic dispersion was used. Dynamic impact test, quasi-static compression test at room temperature (20℃) and cryogenic temperature (-163℃) was evaluated. To evaluate the thermal performance, the thermal conductivity at room temperature (20℃) was measured. As a result, specimens without ultrasonic dispersion have a little effect on strength under the compressive load, although they show high mechanical performance under the impact load. In contrast, specimens with ultrasonic dispersion have significantly increased impact strength and compressive strength. Recently, as the density of Polyurethane foam (PUF) has been increasing, these results can be a method for improving the mechanical and thermal performance of insulation panel.

• 한국항해항만학회지
• /
• 제33권3호
• /
• pp.215-220
• /
• 2009

컨테이너 크레인은 강풍으로부터 보호를 받기 위한 차폐물이 없는 곳에 존재하기 때문에 이상 기후 조건에 취약성이 있는 구조물이다. 본 연구에서는 붐 각도의 변화에 따라 풍동실험과 전산유동 해석을 사용하여 컨테이너 크레인의 구조물에 대한 풍하중의 영향을 수행하였다. 그리고 75m/s의 풍속을 컨테이너 크레인에 적용하였다고 가정하였을 때 컨테이너 크레인의 풍력 내구성 설계에 사용되는 데이터를 컨테이너 크레인 설계자에게 제공하고자 한다. 본 연구에서는 건축물 하중기준의 풍하중 설계기준에 따라 풍하중을 적용하였으며 풍향에 따른 영향을 분석하기 위해서 유동장을 $10^{\circ}$ 간격으로 분할하였다. 이를 바탕으로 풍동실험과 전산 유동해석을 수행하였으며 얻어진 결과들을 비교 연구함으로써 컨테이너 크레인의 구조설계에 필요한 풍하중을 분석하였다.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.19-33
• /
• 2002

경사식 방파제의 설계에 필요한 정보를 제공할 목적으로 수리특성들의 계산을 비교적 쉽게 수행하기 위한 수치해석기법의 수립을 시도하였다. 수치해석은 방파제 외부의 파동장과 내부 공극매체에서의 파동장을 결합시킴으로써 반사율, 전달율(월파전달율과 투과전달율) 그리고 개체내부의 간극수압을 계산하는 것이다. 외부 파동장은 장파가정의 근사 이론을, 내부 파동장은 경계요소법을 이용하여 해석하였다. 수치해석결과를 수리실험결과와 비교한 결과, 반사율과 전달율은 허용오차 범위내에서 비교적 잘 일치하는 것으로 나타났다. 또한, 간극수압은 정량적으로는 다소의 차이를 보이나 정성적으로는 대체적으로 유사한 성향을 보이는 것으로 나타났다. 정량적 차이를 극복하기 위하여 전사면에서의 비선형 파동장에 의한 동수압을 직접 계측하여 수치해석에 입력하는 방안을 제시하였다