• 한국음향학회지
• /
• 제10권1호
• /
• pp.52-60
• /
• 1991

본 연구는 스펙트럼의 동적 특징을 한 파라메타로 하는 DHMM(Dynamic Hidden Markov Model)을 이용한 단독어인식에 관한 것으로 정적 스펙트럼 특징뿐 아니라 동적 스펙트럼 특징을 평가할 수 있는 DHMM에 근거한 음성 인식 실험을 논의 한다. 정적특징으로는 LPC cepstrum 계수를 이용하였고, 동적특징으로는 LPC cepstrum 의 회귀계수를 사용하였다. 이들 두 개의 특징 벡터들을 각각 집단화하여 만든 두 VQ codebook과 입력으로 받아들인 정적 벡터및 동적벡터로 단어들을 DHMM(Dynamic Hidden Markov Model)으로 모델링 하였다. 전체적인 실험에서 기존의 HMM을 이용한 인식실험에서는 88.8%의 인식율을 얻었는데 반해, DHMM을 이용한 인식실험에서는 92.7%의 인식율을 보였다.

• 대한정형도수물리치료학회지
• /
• 제14권1호
• /
• pp.15-23
• /
• 2008

Purpose : To evaluate the effects of elastic resistance exercise of lumbo-pelvic region and upper limbs muscle on equilibrium ability and shoulder pain of the elderly. Methods : The subject consisted of sixteen healthy elderly people(14 females. 2 males). They were from 61 to 83 years old and the mean age was 68.06. All subjects were assigned only the elastic resistance exercise group. The subject group received elastic resistance exercise for about 60 minutes per day, two times per weeks, during 8 weeks period. A Stop watch was used to measure static equilibrium ability and dynamic equilibrium ability and then pressure algometer was used to measure shoulder press pain threshold. All measurements of each subjects were measured at pre-experiment and post-experiment stage. SPSS 12.0 program was used to compile results. A Paired samples t-test was conducted to examine changes of static equilibrium, dynamic equilibrium and shoulder press pain threshold between pre-experiment and post-experiment. Results : The static equilibrium ability, dynamic equilibrium ability and shoulder press pain threshold were significantly differences between pre-experiment and post-experiment(p<.05). Conclusion : This data suggests that an eight week elastic resistance exercise improved static equilibrium ability and dynamic equilibrium ability and then reduced shoulder pain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1153-1155
• /
• 2005

This paper deals with dynamic characteristics of LSRM according to drive condition. First, in experiment of LSRM, position of LSRM detected approximation sensor. Position choose mover of LSRM and inductance. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off. Second, in dynamic characteristic of LSRM, through an experiment, we decided turn-on position of inductance profile. Also, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed current and voltage waveform.

• 소성∙가공
• /
• 제26권5호
• /
• pp.314-322
• /
• 2017

In the high-speed forming analysis, dynamic material properties considering a high strain rate are required. The split Hopkinson pressure bar (SHPB) experiment was performed for measuring dynamic material properties under high strain rate. The pulse shaping method was used to improve the accuracy of the SHPB experiment. A pulse shaper attached to the front of the incident bar was used for specimen dynamic stress equilibrium through stress wave control. Numerical analysis and SHPB test were performed to verify whether the pulse shaper affects the dynamic stress equilibrium in copper and Al6061 specimens. The results of SHPB test and numerical analysis show that the pulse shaper contributes to the dynamic stress equilibrium. Based on the improved stress equilibrium using a pulse shaper, the flow stress curves for copper and Al6061 materials were obtained at strain rates of 1344.4/sec and 1291.6/sec, respectively.

• 한국지진공학회논문집
• /
• 제25권6호
• /
• pp.305-314
• /
• 2021

The Gyeongju and Pohang earthquakes caused damages to many cultural properties; particularly, stone pagoda structures were significantly damaged among masonry cultural properties. To preserve these structures, it is necessary to understand their dynamic behavior characteristics under earthquakes. Analyses on such areas as deformation, frequency, maximum acceleration, permanent displacement, sliding, and rocking have to be performed. Although many analytical studies have already been conducted, dynamic behavior studies based on experiments are insufficient. Therefore, this study analyzed dynamic behavior characteristics by performing a shaking table experiment on a three-story stone pagoda structure at the Cheollongsa temple site damaged by the Gyeongju earthquake. As a result of the experiment, the displacements of stylobates did not occur significantly, but the tower body parts rotated. In particular, the rotation of the 1F main body stone was relatively larger than that of the other chief body stones because the 1F main body stone is relatively more slender than the other parts. In addition, the decorative top was identified as the component most vulnerable to sliding. This study found that the 1F main body stone is vulnerable to rocking, and the parts located on the upper part are more vulnerable to sliding.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.38-41
• /
• 2000

High temperature cure characteristics of polyester resin systems were investigated by isothermal and dynamic differential scanning calorimetries. During isothermal scanning, the experimental procedure was modified to reduce the initial Boss of heat. no kinetic equation from the isothermal experiment was compared with that from the dynamic experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.83-85
• /
• 2006

In this paper, the dynamic characteristic according to variable load of Permanent magnet Linear Synchronous Motor(PMLSM) is dealt with carefully. And the experiment machine is manufactured for analysis of dynamic characteristic. The results of both simulation and experiment are discussed.

• 한국군사과학기술학회지
• /
• 제7권4호
• /
• pp.107-113
• /
• 2004

In order to model a connection part between a control fin and actuator, the related characteristics of a dynamic stiffness were extracted from experiments. These characteristics include the static stiffness of a control fin and the dynamic stiffness of an actuator, so they are called the mixed dynamic stiffness here. This mixed dynamic stiffness is used as the boundary condition of a control fin connected to an actuator when the flutter characteristics are analyzed. The simulated stiffness of an actuator is corrected from the experiment results and the mixed dynamic is finally formulated in the domain of frequencies.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.913-919
• /
• 2008

Dynamic characteristics of a wrist power transmission of an industrial robot are studied. The wrist power transmission has complex structure characteristics, because it is composed with several shafts and gear system. We used an analytical method to investigate the dynamic characteristics. An analytical model is a rigid model which is composed with masses and springs. Both bearing and gear contact model represent equivalent stiffness springs which are determined by the experiment. In order to investigate the dynamic tendency of the robot wrist power transmission, we simulate the analytical model. There is a dynamic analysis tool which is called the RecurDyn. To verify the analytic results, we experiment a signal analysis which is an overall noise level of the robot. By the parametric study of the element of the robot, we study an improvement method of dynamic characteristics.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.181-188
• /
• 2007

This paper presents a torque control method of a hydraulic actuation system for measuring the dynamic stiffness of missile fin actuators. We propose a new control technique called Dual Dynamic Torque Feedback Control(DDTFC), which improves the stability of the torque control system and enables fast tracking of torque command. The developed control scheme is derived from the physical understanding based on mathematical modelling and analysis. The dynamics of hydraulic torque control servo-system is unravelled via physics-based modelling and nonparametric system identification. In order to verify the effectiveness of the method, the experiment is carried out with a test equipment for measuring the dynamic stiffness. The experiment and simulation results show that DDTFC gives stability improvement.