• 한국콘텐츠학회논문지
• /
• 제22권6호
• /
• pp.56-68
• /
• 2022

최근 실시간 처리의 요구가 증가하면서 시간에 따라서 변화하는 동적 그래프에 관한 연구가 활발하게 진행되고 있다. 동적 그래프를 분석하기 위한 알고리즘의 하나로 연결 요소가 있다. GPU는 높은 메모리 대역폭, 연산 성능으로 대규모의 그래프 계산에 적합하다. 그러나 동적 그래프의 연결 요소를 GPU를 이용하여 처리할 때, GPU의 제한된 메모리로 인해 실제 그래프 처리 시 CPU와 GPU 간에 잦은 데이터 교환이 발생한다. 본 논문에서는 동적 그래프에서 GPU 기반의 효율적인 점진적 연결 요소 처리 기법을 제안한다. 제안하는 기법은 Weighted-Quick-Union 알고리즘을 기반으로 연결 요소 레이블에 구성 요소의 개수를 이용하여 연결 요소를 빠르게 계산한다. 또한, 재계산할 부분을 판별하여 GPU로 전송할 데이터를 최소화하여 대규모 그래프에 대하여 CPU와 GPU 간의 데이터 교환 횟수를 감소시킨다. 뿐만 아니라 GPU와 CPU 간에 데이터 전송 시간 낭비를 줄이기 위해 GPU와 CPU가 비동기로 실행하는 처리 구조를 제안한다. 실제 데이터 집합을 사용한 성능 평가를 통해 제안하는 기법의 우수성을 입증한다.

• 한국정밀공학회지
• /
• 제5권4호
• /
• pp.39-47
• /
• 1988

There are many methods in measuring the signal of cutting, but by measuring the multi-signal, we can pick up the wear and chipping of the tool more accurately. Hence, the present study is concerned with analysing the dynamic component as well as the static component measured by the tool dynamometer, finding out which signal is involved in each component, comparing the capability of the cemented carbide drill and the HSS drill, and discussing the chipping of the cemented carbide drill. In addition, discussion is made about the characteristics of the frequency of the torque and thrust in connection with the dynamic component.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.416-421
• /
• 2005

컴포넌트를 다양한 영역에 사용하기 위해 코드를 추가적으로 요구할 경우, 추가되는 코드가 뒤엉켜져서 컴포넌트 재사용을 방해하게 된다. AOP는 이러한 컴포넌트의 다양성 문제를 해결하기 위해 나온 방법이다. 본 논문에서는 Fractal 컴포넌트 모델에 제어 객체와 인터셉터 객체를 합성하기위해 혼합클래스(mixin class)를 사용하여 joinpoint controller interface를 생성하였으며, 이러한 인터페이스에 합성된 aspect을 적용하였다. 그리고, Aspect의 재사용성을 높이기 위하여, Decorator 디자인 패턴을 사용하여 동적으로 위빙하는 위버를 설계하였다.

• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.837-842
• /
• 2009

구성 모드(Component mode) 합성법을 이용하여, 태양전지판의 유연구조 진동특성을 고려한 위성의 축약된 동적 모델링 기법을 수립하였다. 유연구조 위성의 본체와 태양전지판을 서로 다른 두 개의 부구조물로 나누고, 각각의 국부좌표계에 대하여 유도된 부구조물 표현식들을 위성 전체의 기준좌표계에 대해서 합성하였다. 수립된 부구조물 합성법은 단일 태양전지판을 갖는 유연구조 위성의 수치적 예제에 적용되었으며, 태양전지판의 회전을 고려한 전달함수 결과의 고찰을 통하여 동적 모델링 기법의 타당성을 확인하였다.

• 대한전기학회논문지
• /
• 제39권11호
• /
• pp.1174-1182
• /
• 1990

A hgih efficiency and good dynamic performance drive system of an induction motor is presented in this paper using vector control technique. If the induction motor is driven under light loads with rated flux, the iron loss is excessively large compared with the copper loss, resulting in poor motor efficiency. High efficiency drive of an induction motor can be achieved by adjusting the flux level which leads the total motor loss to be a minimum value. Generally reducing the flux degrades the dynamic performance, but the dynamic performance of the proposed system is also maintained high. If the d-axis is coincident with rotor flux phasor in synchronous rotating reference frame, the stator current can be decoupled as flux component and torque component. At steady state, the developed motor torque is proportional to the product of the flux and torque component. The combination of the two components minimizing the motor loss could be found with numerical method. As the procedure to obtain the optimal combination is too hard, it is found experimentally. The system block diagram is suggested for maximum efficiency control. The proposed system is studied through digital simulation and verified with experiment. The experimental results show the possiblity of a high efficiency drive with good dynamic performance of maximum efficiency control.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.331-341
• /
• 1993

The propagating crack problems under dynamic antiplane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems by theoretical method or experimental method in orthotropic material, it is important to know the dynamic stress intensity factor in the vicinity of crack tip. Therefore the dynamic stress field and dynamic displacement field with dynamic stress intensity factor of orthotropic material in mode III were derived. When the crack propagation speed approachs to zero, the dynamic stress components and dynamic displacement components derived in this paper are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determined by using the concept of crack closure energy with the dynamic stresses and dynamic displacements derived in this paper. Finally, the characteristics of crack propagation are studied with the properties of orthotropic material and crack speed. The variation of angle .alpha. between fiber direction and crack propagating direction and crack propagation speed fairly effect on stress component and displacement component in crack tip. The influence of crack propagation speed on the speed on the stress and displacement is greater in the case of .alpha.=90.deg. than in the case of .alpha.=0.deg. and the faster the crack propagation speed, the greater the stress value and displacement value.

• Structural Engineering and Mechanics
• /
• 제75권3호
• /
• pp.327-337
• /
• 2020

The stability and dynamic performance of a flapper-nozzle servo valve depend on several factors, such as the motion of the armature component and the deformation of the spring tube. As the only connection between the armature component and the fixed end, the spring tube plays a decisive role in the dynamic response of the entire system. Aiming at predicting the vibration characteristics of the servo valves to combine them with the control algorithm, an innovative dynamic stiffness based on a distributed parameter model (DPM) is proposed that can reflect the dynamic deformation of the spring tube and a suitable discrete method is applied according to the working condition of the spring tube. With the motion equation derived by DPM, which includes the impact of inertia, damping, and stiffness force, the mathematical model of the spring tube dynamic stiffness is established. Subsequently, a suitable program for this model is confirmed that guarantees the simulation accuracy while controlling the time consumption. Ultimately, the transient response of the spring tube is also evaluated by a finite element method (FEM). The agreement between the simulation results of the two methods shows that dynamic stiffness based on DPM is suitable for predicting the transient response of the spring tube.

• 한국주거학회논문집
• /
• 제13권3호
• /
• pp.11-20
• /
• 2002

The purpose of this study is to find out the meanings of water and water spaces in the Western architecture. The meaning of water is investigated by means of mythology and literature studies. It is found that water has ambivalent meanings, i.e. life and death, creation and destruction, chastity and sensuality. The meanings of water spaces in the Western architecture are dramatic, secret and dynamic, and represent publicity, verticality, formality in addition to desire for authority and realization(embodiment) of paradise. Water space is an essential component of beautiful and dynamic spaces and is used to revitalize dreary spaces.

• 소음진동
• /
• 제3권1호
• /
• pp.77-82
• /
• 1993

In general, the dynamic analysis with FEM(Finite Element Method) of large structures requires large computer memory space and long computational time. For the purpose of economical dynamic analysis of large structures, most of engineers want to use an efficient solution algorithm. This paper reports the modified CMS(Component Mode Synthesis) method which uses more efficient algorithm than the classical CMS method. In this paper, it is shown that Ritz vector sets can play the role of normal mode vector sets of substurctures in the CMS algorithm. The modified CMS method has good convergence performance compared with that of the classical CMS method.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.97-100
• /
• 2005

Dynamic response of organic light-emitting diodes were analyzed in $ITO/Alq_3$(100 nm)/Al device structure with a variation of voltage an frequency. At low frequency region, complex impedance is mostly governed by resistive component, and at high frequency region by capacitive component. Also, we have evaluated resistance, capacitance and permittivity of devices.