• 한국지반신소재학회논문집
• /
• 제14권4호
• /
• pp.45-58
• /
• 2015

국내에서의 도로 하부지반의 품질 관리는 주로 하중 지지력을 확인하는 평판재하시험과 상대 다짐도를 구하기 위한 현장들밀도시험을 이용하고 있으나, 최근에는 현장 여건에 맞는 적합성과 경제성, 신속성 등을 고려한 동적 콘 관입 시험과 동평판재하시험 등의 이용이 증가하는 상황이다. 이에 본 연구에서는 이러한 여러 다짐평가기법간의 상관성을 분석하기 위하여 실제 도로공사현장 3개소에서 노상두께 20cm, 30cm, 40cm에 대한 평판재하시험, 현장들밀도시험, 동적 콘 관입시험, 동평판재하시험을 이용하여 노상토의 지지력을 평가하였다. 또한, 각각의 다짐평가기법간의 결과를 비교 분석하여, 향후 활용법에 대하여 살펴보았다.

• 대한통합의학회지
• /
• 제3권4호
• /
• pp.43-51
• /
• 2015

Purpose : This study examines the effect of trunk stabilization program on the body balance, lung capacity, and muscular activity of the rectus abdominis and external oblique of healthy adults. Method : A survey was conducted for 20 students of K University located in the city of Y in Gyeongsangbuk-do Province of Korea. The trunk stabilization program consisted of a hollowing exercise, curl-up, bridging exercise, and birddog exercise. This was performed 14 times in total (7 times a week for two weeks). For analysis, good balance was used to measure both static and dynamic balancing ability. A peak flow meter was used to measure the maximum expiratory flow, and MP150 was used to measure muscular activity of the rectus abdominis and external oblique. Result : After the trunk stabilization program, the participants showed a difference in score and time taken to achieve static and dynamic balance, and muscular activity of the rectus abdominis and external oblique at a statistically significant level (p<0.05). However, no significant difference was observed in the left-to-right distance and front-to-back distance in a dynamic balance, and the lung capacity (p>0.05). Conclusion : The results showed that the trunk stabilization program was effective in enhancing both static and dynamic balancing ability and muscular activity. It also increased the lung capacity although the change was not at a statistically significant level.

• 한국시스템다이내믹스연구
• /
• 제12권4호
• /
• pp.93-124
• /
• 2011

The introduction of competition in the generation of electricity has raised the fundamental question of whether markets provide the right incentives for the provision of the capacity needed to maintain system reliability. Capacity mechanisms are adopted around the world to guarantee appropriate level of investment in electricity generation capacity. In this study, we discuss these approaches and analyze the capacity pricing mechanisms from the adequacy perspective. We conclude that the design of capacity mechanism is very important to decrease electricity spot price and increase total electric capacity. Specifically, the constant of capacity pricing mechanism made a difference to the performance of electricity market. However, the slope of capacity price mechanism is better than the constant of that in improving performance of electricity market.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.20-27
• /
• 2004

Reinforced twice than width of foundation with SIC under steel piles drived in cohesion soil and in the coal-limestone which heavily fractured. To analyze behaviour characteristic of steel piles, load transfer test was performed to steel piles attached with strain gauges to axial direction. After it passed 49days, dynamic load test was performed to set-up effect of steel piles bearing capacity. The results of test were compared to each other. According to the results, as the skin friction of steel pile was on the same condition, end bearing capacity of steel piles established on SIC solid of cemented milk in cohesion soil was three times than steel piles established on SIG solid of cemented milk in heavily fractured coal- limestone. After piles were driven and passes 49days, in case of piles on SIG solid of comented milk in cohesion soil the increaes of allowable bearing capacity was 442.9% and allowable bearing capacity of piles on SIG solid of cemented milk in heavily fractured coal-limestone increased 22.4%.

• 에너지공학
• /
• 제5권1호
• /
• pp.87-92
• /
• 1996

본 연구는 전력계통이 3개의 발전기로 구성되었고, 요금적용 시간대가 3개인 경우 동태적 최적화를 이용한 최적 가격 및 투자 정책을 도출하기 위한 것이다. 이를 위하여 최대원리법(Maximum Principle)을 이용하였으며, 종전에는 수요함수에서 고려되지 않았던 교차가격 탄력성을 수요함수에 포함시켰다. 분석 결과 다음과 같은 결론을 얻을 수 있다. 첫째, 설비가 충분한 경우 각 시간대의 최적 가격은 단기한계비용과 일치한다. 그러나 시간이 경과함에 따라 수요증가에 의하여 설비제약이 활성화되면 각 시간대의 가격은 설비비를 포함하는 장기한계비용 형태를 띄게 된다 둘째, 각 시간대에 있어서 발전기의 설비비의 분담은 요금적용 시간대의 길이에 의하여 영향을 받는다. 즉, 해당 시간대의 요금적용 시간대가 길어지면 길어질수록 해당시간대에 대응되는 설비의 설비비 분담은 감소하고, 짧아지면 질수록 설비분담은 높아지게 된다. 셋째, 동태적 분석에서의 설비투자는 기본적으로 각 시간대의 수요증가율과 같은 비율로 증가하며, 또한 신규설비 투자규모는 각 시간대의 투자설비를 서로 분담하게 된다.

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3706-3714
• /
• 2011

본 연구는 주어진 시간 내에 현재의 열차운행계획을 바꾸지 않고 추가적으로 수송할 수 있는 화물의 최대량과 수송 일정을 찾고자 하는 알고리즘에 관한 것이다. 이를 위해 시간전개형 네트워크로 주어진 문제를 표현한 후, 전처리 절차를 통해 불필요한 호들을 제거하는 방법으로 정적네트워크에 반복적인 최대유통문제를 적용하여 기존 열차운행계획을 고려한 화물의 최대량과 수송일정을 제시하는 절차를 예시와 함께 제시하였다.

• 상하수도학회지
• /
• 제10권4호
• /
• pp.103-110
• /
• 1996

Excessive phosphorus (P as orthophosphate) is one of the major pollutants in natural water that are responsible for algal blooms and eutrophication. P removal by slag is an attractive solution if the P sorption capacity of the slag is significant. To design an efficient land treatment facility, basic information on the behaviour of P in the media-water environment is required. In this study, detailed column experiments were conducted to study the P transport under dynamic condition, and mathematical models were developed to describe this process. The column experiments conducted with dust and cake waste products (slag) from BHP steel industry in Australia as adsorbing media indicated that they had higher sorption capacity of P than that of a sandy loam soil from North Sydney, Australia. P transport in the dust and cake columns exhibited characteristics S-shaped or curvilinear breakthrough curves. The simulated results from a dynamic physical non-equilibrium sorption model (DPNSM) and Freundlich isotherm constants satisfactorily matched the corresponding experimental breakthrough data. The mobility of P is restricted proportionally to the adsorbent's sorption capacity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2124-2143
• /
• 2016

In Long Term Evolution-Advanced (LTE-A) systems, Inter-cell Interference (ICI) is a prominent limiting factor that affects the performance of the systems, especially at the cell edges. Based on the literature, Fractional Frequency Reuse (FFR) methods are known as efficient interference management techniques. In this report, the proposed Dynamic Fractional Frequency Reuse (DFFR) technique improved the capacity and cell edge coverage performance by 70% compared to the Fractional Frequency Reuse (FFR) technique. In this study, an improved power allocation method was adopted into the DFFR technique to reach the goal of not only reducing the ICI mitigation at the cell edges, but also improving the overall capacity of the LTE-A systems. Hence, an improved water-filling algorithm was proposed, and its performance was compared with that of other methods that were considered. Through the simulation results and comparisons with other frequency reuse techniques, it was shown that the proposed method significantly improved the performance of the cell edge throughput by 42%, the capacity by 75%, and the coverage by 80%. Based on the analysis and numerical expressions, it was concluded that the proposed DFFR method provides significant performance improvements, especially for cell edge users.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.619-627
• /
• 2020

This study measures the relationship between labor productivity and national competitiveness. Through the shift- share analysis method, the paper has separated labor productivity into three factors: static shift effect, dynamic shift effect and endogeneous effect. Next, in combination with the Granger causality test, the paper examines the relationship between the factors constituting labor productivity and competitiveness during the period from 2005 to 2017. Research data is collected from General Statistics Office and annual global competitiveness reports. The results show that the interaction between labor productivity with global competitiveness index (GCI) in Vietnam has similar variation. Nevertheless, when separating labor productivity into three effects, this relationship shows more clearly that the impact of labor productivity on GCI scores is mainly caused by endogeneous effect, not by static shift effect or dynamic shift effect. Therefore, in order to improve its competitiveness, Vietnam should focus on a number of solutions: reforming the education system towards developing thinking capacity and creative capacity; fostering industrial manners to create dynamic and flexible workers; building the State with sufficient capacity to implement consistent and transparent policies; formulating policies to attract all economic sectors so that they actively participate in the field of human resource training for the country.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.441-445
• /
• 2005

In the resent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. But, no detailed researches between the thermo-dynamic property in Nitinol alloy have been done yet. In this study, the thermal property of high temperature Nitinol shape memory alloy were evaluated using differential scanning calorimeter(DSC). The structure property was investigated using X-ray diffraction(XRD). A dynamic mechanical analyzer(DMA) with three point bending mode was used to study storage and loss modulus of shape memory alloy according to the thirteen frequencies in the temperature range between 30 and $200^{\circ}C$. The effects of the temperature heating/cooling rate, the frequency on the damping capacity have been systematically investigated. Such a frequency and temperature changes also influenced significantly to the damping behavior of the shape memory alloy. It was also found that Nitinol exhibited high damping capacity during phase transformation.