• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.441-445
• /
• 2005

In the resent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. But, no detailed researches between the thermo-dynamic property in Nitinol alloy have been done yet. In this study, the thermal property of high temperature Nitinol shape memory alloy were evaluated using differential scanning calorimeter(DSC). The structure property was investigated using X-ray diffraction(XRD). A dynamic mechanical analyzer(DMA) with three point bending mode was used to study storage and loss modulus of shape memory alloy according to the thirteen frequencies in the temperature range between 30 and $200^{\circ}C$. The effects of the temperature heating/cooling rate, the frequency on the damping capacity have been systematically investigated. Such a frequency and temperature changes also influenced significantly to the damping behavior of the shape memory alloy. It was also found that Nitinol exhibited high damping capacity during phase transformation.

• 방사선산업학회지
• /
• 제4권3호
• /
• pp.271-276
• /
• 2010

Epoxy resin has wide application in various industrial fields because of their good mechanical strength, superiority adhesion and low shrinkage etc. And the typical curing method for epoxy resins is thermal and press compaction. However, a curing method was used electron beam process in this study. Epoxy acrylate was fabricated from mixture of epoxy, acrylic acid, tetraphenylporphyrin (TPP) and hydroquinone monomethyl ether (MEHQ) with mole ratios. Then electron beam irradiation effect on the curing of the epoxy acrylate resin was investigated various absorption dose in nitrogen atmospheres at room temperature. The dynamic mechanical and thermal properties of the irradiated epoxy acrylate resins were characterized using dynamic mechanical analysis (DMA) and thermogravimetric analyzer (TGA). And the tensile and flexural strength were measured by an universal tensile machine (UTM).

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.55-64
• /
• 2021

PURPOSE: The purpose of this study was to apply dynamic neuromuscular stabilization (DNS) to subjects with forward head posture (FHP) and to compare its effects on respiratory function as against the conventional neck stabilization exercise and neck stretching and extensor strengthening exercises. METHODS: The whole-body posture measurement system was used to measure the degree of FHP, and a spirometer and a respiratory gas analyzer were used to measure the respiratory function. After the intervention was completed, the changes over time were analyzed in the DNS group, the neck stabilization exercise group, and the neck stretching and extensor strengthening exercise group. The inter-group difference in the changes was also analyzed. A repeated ANOVA was performed to compare the respiratory function according to the period between the three groups, and the least significant difference (LSD) method was used for the post hoc test. RESULTS: After the 6-week exercise period, respiratory functions, such as forced vital capacity (FVC), forced expiratory volume for 1 second (FEV1), forced expiratory volume for 1 sec/forced vital capacity (FEV1/FVC), maximum oxygen intake (VO₂max), and the volume of expired gas (VE), significantly improved according to the period (p < .05), but no inter-group differences were found. CONCLUSION: DNS is an effective training method, and can be applied along with neck stabilization exercise and neck stretching and extensor strengthening exercises, which are widely used in clinical practice, to people with FHP who cannot directly perform neck exercises to improve their respiratory function.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.90-95
• /
• 2023

We describe an optimal alignment method for improving accuracy of dynamic spectroscopic polarimeter based on monolithic polarizing interferometer. The dynamic spectroscopic polarimeter enables real-time measurements of spectral ellipsometric parameters by using a spectral carrier frequency concept. However, the non-polarizing beam splitter used in the monolithic polarizing interferometer cannot maintain the polarization state perfectly due to phase retardation caused by optical anisotropic characteristics of the non-polarizing beam splitter, resulting in degraded measurement accuracy. The effect of the beam splitter can be minimized through optimal alignment of the polarizers used in the polarizing interferometer and the analyzer. We demonstrate how much the proposed alignment method can enhance the measurement accuracy by comparing with previous alignment approach.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.5-12
• /
• 2005

해머에 의해 발생한 에너지와 그의 전달은 표준관입시험의 N치에 영향을 주며 이러한 SPT해머에너지는 이론적 에너지, 속도 에너지, 롯드 에너지, 그리고 동적효율 등으로 나누어진다. 본 연구에서는 항타 분석기(Pile Driving Analyzer, PDA)와 디지털 라인-스캔카메라(Digital Line-Scan Camera)를 이용하여 국내에서 널리 사용 중인 시험 장비들에 대해 롯드 에너지와 속도에너지를 직접 측정하여 각 시험 장비의 동적효율(Dynamic efficiency)을 계산하였다. 시험 결과 FV 방법에 의해 산정된 각 장비의 평균 롯드 에너지 전달율은 도넛해머, 안전해머, 자동해머의 경우 각각 49.57, 61.60, $87.04\%$로 측정되었다. 해머의 타격직전의 박하 속도는 도넛해머, 안전해머, 자동해머의 경우 각각 $3.177{\pm}0.872$, $3.385{\pm}0.681$, $3.651{\pm}0.550$ m/s로 측정되었고 이에 따라 동적 효율은 각각 0.732, 0.801, 0.973으로 계산되었다.

• Journal of Pharmaceutical Investigation
• /
• 제36권1호
• /
• pp.31-38
• /
• 2006

Using a Rheometries Dynamic Analyzer (RDA II), the dynamic viscoelastic properties of a semi-solid ointment base (vaseline) in large amplitude oscillatory shear flow fields were measured over a temperature range of $25{\sim}45^{\circ}C$ and the linear viscoelastic behavior in small amplitude oscillatory shear flow fields was investigated over a wide range of angular frequencies. In this article, the nonlinear viscoelastic behavior was reported from the experimentally obtained data and the effect of temperature on this behavior was discussed in detail. In addition, the angular frequency and temperature dependencies of a linear viscoelastic behavior were explained. Finally, the applicability of a time-temperature superposition principle originally developed for polymeric materials was examined using a shift factor. Main results obtained from this study can be summarized as follows : (1) At very small strain amplitude region, vaseline shows a linear viscoelastic behavior independent of the imposed deformation magnitudes. Above a critical strain amplitude $({\gamma}_{0}=0.1{\sim}0.2%)$, however, vaseline exhibits a nonlinear viscoelastic behavior ; indicating that both the storage modulus and dynamic viscosity are sharply decreased with increasing deformation magnitude. (2) In large amplitude oscillatory shear flow fields, an elastic behavior (storage modulus) has a stronger strain amplitude dependence and begins to show a nonlinear behavior at a smaller strain amplitude region than does a viscous behavior (dynamic viscosity). (3) In small amplitude oscillatory shear flow fields, the storage modulus as well as the loss modulus are continuously increased as an increase in angular frequency and an elastic nature is always superior to a viscous behavior over a wide range of angular frequencies. (4) A time-temperature superposition principle can successfully be applicable to vaseline. This finding allows us to estimate the dynamic viscoelastic behavior of vaseline over an extraordinarily extended range (11 decades) of angular frequencies inaccessible from the experimentally measured range (4 decades).

• Composites Research
• /
• 제32권1호
• /
• pp.78-84
• /
• 2019

본 연구에서는 동적기계분석장치(dynamic mechanical analysis, DMA)와 시간-온도 중첩법(time-temperature superposition, TTS)을 이용하여 탄소섬유/에폭시 복합재의 장기 성능을 예측하고자 하였다. 이를 위해 단일 진동수 시험, 다중 진동수 시험, 크리프 TTS 시험을 수행하였다. 단일 진동수(single-frequency) 시험과 다중 진동수(multi-frequency) 시험에서는 $-30^{\circ}C$에서 $240^{\circ}C$까지 $2^{\circ}C/min$로 온도를 상승시키면서 $20{\mu}m$ 진폭의 사인(sine) 파형의 하중을 가하였으며 다중 진동수 시험에 적용된 진동수는 0.316, 1, 3.16, 10, 31.6 Hz이다. 크리프 TTS 시험에서는 $-30^{\circ}C$에서 $230^{\circ}C$까지 $10^{\circ}C$마다 15 MPa의 응력을 10분 동안 가하였다. 단일 진동수 시험을 통해 유리전이온도를 구하였으며 다중 진동수 시험을 통해 진동수 별 유리전이온도에서 활성화 에너지와 온도 별 저장탄성계수 선도를 구하였다. 또한 아레니우스 식(Arrhenius equation)을 통해 얻은 이동 인자를 적용하여 기준 온도에 대한 마스터 선도를 얻었다. 또한 크리프 TTS 시험을 통해서는 크리프 컴플라이언스 선도를 구하고 직접 이동 기법을 이용하여 구한 이동 인자를 적용하여 기준 온도에 대한 마스터 선도도 얻었다. 이와 같은 과정을 통해 얻은 마스터 선도를 이용하면 주어진 환경 조건에 대한 탄소섬유강화 복합재의 장기 성능을 예측할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제19권1호
• /
• pp.71-80
• /
• 1991

This study was carried out to investigate replaceable species with the conventional sounding board sitka spruce. by comparing the dynamic properties such as density, dynamic Young's modulus and internal friction Dynamic Young's modulus. internal friction of longitudinal and radial direction measured in free mass-free boundary condition for facile vibration analysis and measured by forced vibration method. Dynamical properties of four species were measured on squared plate specimen that the four edges were hung vertically by threads and driven magnetically through an iron piece glued on the specimen, by the use of condenser microphone as vibration transducer, and analyzed by FFT analyzer. The results obtained were as follows: 1. Chaldni method using aluminum powder was proper to identify the vibration mode in the plate vibration and it was possible to verify the resornance mode. 2. It was considered that it was necessary to investigate the influence of adhesive part on the plate vibration when the sounding board was made by two or three small board adhesion. 3. It was considered that plate vibration method, which was a superior to the vibration test of beam, was suitable for selecting suounding board because dynamic Young's modulus and internal friction show different order according to longitudinal and radial direction. 4. Paulownia tomentosa Thunb.) Steudel has been considered to be replaceable species with sitka spruce because it has high dynamic Young's modulus compared with low density, low internal friction, and K value of Paulownia tomentosa (Thunb.) Steudel is greater than that of sitka spruce.

• 한국재료학회지
• /
• 제2권4호
• /
• pp.257-262
• /
• 1992

Diglycidyl ether of bisphenol A (DGEBA)와 경화제로서 4, 4'-methylene dianiline(MDA) 에 반응성 첨가제 succinonitrile(SN)을 첨가한 새로운 계를 Differential Scanning Calorimetry (DSC)로 이용하여 3$0^{\circ}C$부터 35$0^{\circ}C$의 온도 범위에서 승온적 진행 방범(dynamic run method)으로 얻은 값을 가지고 최대 반응속도에서의 온도에 승온속도가 미치는 영향을 해석 할 수 있는 kissinger식을 적용하여 경화반응 속도론을 연구하였다. SN을 첨가한 DGEBA/MDA계의 활성화에너지 ($E_a$)와 pre-exponential factor(A) 그리고, SN이 첨가될 때 에폭시와 아민과의 반응속도 상수 k를 구하였다.

• The Journal of Korean Physical Therapy
• /
• 제26권1호
• /
• pp.21-26
• /
• 2014

Purpose: This study examined the effect of trunk stabilization exercise upon the lumbar stabilization and foot pressure on an unstable surface with back pain. Methods: The subjects of the study were 10 patients who showed the symptom of back pain with excessive lumbar curve. This study was 4 weeks, 30 minutes per session, three times a week for a total of 12 times as a result of exercise radiation imaging device and foot pressure analyzer. Results: The sacrohorizontal angle was statistically significant(p<0.05). Comparison of the difference between static right and left foot pressure ratio analysis was statistically significant(p<0.05). Dynamic right and left foot pressure comparisons for the difference was statistically significant in the analysis (p<0.05). Conclusion: Trunk stabilization exercise and the reduction of the excessive sacrohorizontal angle, and static and dynamic foot pressure imbalance reduced left and right.