• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.31-39
• /
• 2021

In this study, the dyeing properties of supercritical fluid dyed nylon fabrics were investigated which use two types of dyes for dyeing nylon. For other dyeing conditions were referred to related literature, and dyeing was performed with different dyeing concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, the color intensity increased as the concentration increased, but the increase was insignificant at high concentration. This tendency was more obvious in C.I. Disperse Orange 155 than in C.I. Disperse Yellow 42. The dye absorption rate also decreases as the concentration increases, but at 0.85% o.w.f concentration, C.I. Disperse Yellow 42 was 97.29% and C.I. Disperse Orange 155 was 93.77%. For both dyes, the wash fastness dropped by 0.5 to 1 class from the sample that was dyed at a concentration of 0.5% o.w.f in the wash fastness test.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2001년도 추계학술발표회 논문집
• /
• pp.3-11
• /
• 2001

Fundamental studies at the CSIRO division of Wool technology and ICI on the diffusion of dyes into wool〔1,2〕have let to development of a new approach to wool dyeing. In this method, the cell membrane complex of wool is modified before dyeing by treatment under mildly alkaline conditions with a special chemicals. Wool pretreated with ethoxylated quaternary ammonium salt has an increased rate of dyebath exhaustion and dye penetration early in the dyeing cycle. This enables the treated material to be dyed below the boil for a similar time to the conventional cycle. This technique can be used on untreated and shrinkresist-treated wool and wool/nylon blends. In addition to good macro-levelness and excellent coverage of tippiness, the low temperature dyeing process give higher exhaustion levels of dyestuffs and insect-resist agent and hence cleaner effluent liquors, compared with conventional dyeing process. Low Temperature Dyeing process cause significantly less fiber damage than conventional way. The reduction in damage is reflected in improved processing performance of the dyed wool.

• 기술사
• /
• 제15권2호
• /
• pp.24-31
• /
• 1982

This study concerns with the reduction of the COD and deceleration of dyeing wastewater from DAEGU city area by ozonation. The COD reduction by ozonation follows near linear relationships versus ozonation time, temperature and concentration. The color in dyeing wastewater and of dyes can he strikingly reduced as the water is quasi colorless after ozone treatment. COD reduction rate of wastewater was found not to be dependented on pH, however, high temperature gave better results, although economically not feasible. The ozonation of dyeing wastewater can give good results when dyes, scouring agent and sticking agents were pre-separated.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.275-285
• /
• 2006

The purpose of this study was to examine the change of dyeing ability by K/S values, when dyed in different twisting processes and by one bath system and two bath system, to find possible ways of minimizing the color difference between cotton and polyester in composite yarn. The two types of composite yarn, which had one setting process(CP1) and two setting processes(CP2) were dyed with reactive/disperse dyes in both one bath dyeing system and two bath system. The dyeing ability according to the two different twisting processes was measured, and the values of the CP1 were higher compare to the values of CP2 in both one and two bath dyeing systems. This is because CP1 applied only one setting could shrink dyeing process at 130$^{circ}C$. This shrinkage increased the number of twists in the unit length and increased the yarn density, and this is the reason that the K/S values were measured higher than those of CP2. In wet shrinkage test, in opposition to CP2 only had 0.76$\%$ of the shrinkage rate, CP1 had 3.00$\%$ of the shrinkage rate. Also, the dyeing ability according to the two different dyeing methods was measured, and the values of CP1 and CP2 were both higher when dyed in two bath system. On the other hand, the color differences between cotton and polyester in composite yarns, were smaller for CP2 than that for CP1 and were also smaller in two bath dyeing system than in one bath dyeing system. Therefore, the ways of minimizing color difference between cotton and polyester in composite yarn are to apply enough setting in order to minimize shrinkage in dyeing process and to choose two bath dyeing system.

• 한국염색가공학회지
• /
• 제6권4호
• /
• pp.27-33
• /
• 1994

Wool fabrics were treated with low temperature oxygen plasma and/or protease, and examined for their mechanical and dyeing properties. By plasma-treatment the strength of wool fabric increased and higher rate of weight loss for protease treatment was obtained. When dyed by levelling type acid dye equilibrium dye uptake appeared same, but rate of dyeing increased by the plasma treatment, while, with milling type acid dye, both of them increased greatly in the order of untreatedplasma/protease-treated. It was assumed from the above results that plasma affects the surface of fiber, and enzyme attacks mainly the inner part of fiber. This was confirmed again by scanning electron microscope.

• Ocean Science Journal
• /
• 제41권4호
• /
• pp.221-226
• /
• 2006

More attention has been paid to the research on decolorization of dyeing wastewater nowadays. In this study, an investigation into the decolorization of dyeing wastewater was conducted using a combination of coagulant, carboxymethyl chitosan (NOCC) and coagulant aid, polyscrylamide (PAM). The factors influencing the decolorization efficiency, such as pH value, coagulant and the dosages of coagulant, were discussed. The results showed that using PAM as coagulant aid could reach a high decolorization efficiency compared with using NOCC alone. The optimal conditions were pH 2.3, 480 mg/L for NOCC, and 4-8 mg/L for PAM. Under the optimum conditions, the rate of decolorization could achieve 99%, and the removal of chemical oxygen demand (COD) could achieve 90%. In addition, the membrane processes with chitosan/rare-earth-metals could enhance the decolorization rate of Direct Black FF to 94.7%, and Indanthren Red F3B to 98.2%, respectively.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.110-117
• /
• 2010

Recently, there is a trend to utilize natural dyes in many dyeing fields. In this work, the effects of benzyl alcohol in human hair dyeing with cochineal, a natural dye, was investigated. We investigated the K/S value and color value of dyed hair, water retention of dyed hair, protein release-ability of dyed hair, and wash fastness of dyed hair according to dyeing time and temperature. The shade of dyed hair was reddish. By adding benzyl alcohol in cochineal dyeing, the dyeing rate was increased and the dyeing equilibrium was established at early stage. The water retention of dyed hair was increased and the protein release-ability of dyed hair was decreased, meaning that the hair was less damaged during dyeing, The dyed hair showed a good wash fastness.

• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.73-79
• /
• 2003

It is generally known that cotton treated with liquid ammonia has better soft handle, wrinkle recoveries and stability of appearance as compared with the alkali mercerized cotton. In this study, the various cotton fabrics treated with liquid ammonia$(NH_3)$, sodium hydroxide(NaOH) and sodium hydroxide(NaOH)/liquid ammonia$(NH_3)$ and untreated cotton fabric were investigated and compared in terms of physical properties and dyeing behavior. As the result, the strength of four kinds of cotton fabrics were similar. But the elongation of cotton treated with liquid ammonia increased slightly. Liquid ammonia treatment reduced the crystallinity of cotton and the crystalline structure of cotton transformed from cellulose 1 to mixed structure of celluloseIand III. In dyeing, dyeing rate decreased but equilibrium dye uptake increased by liquid ammonia treatment of cotton fabrics.

• 복식문화연구
• /
• 제24권6호
• /
• pp.817-824
• /
• 2016

The introduction of natural dyes into modern dye houses is very promising green chemistry concept that should be popularized more to reduce the dependency of leather dyeing on some toxic and non-biodegradable synthetic dyes. In this study, the properties of dyeing of cochineal on cow leather were evaluated. The proper dyeing conditions were identified with dye uptake (K/S values) depending on the colorant concentration, dyeing duration, dyeing temperature, and dye bath pH. For the proper mordanting conditions, color changes for different mordants were observed as $La^{*}b^{*}$ and H V/C values. Color fastness (light, rubbing, and dry cleaning) was also examined. Additionally, antibacterial properties and UV protection were examined. The results were as follows: The optimized dyeing conditions were 300% o.w.f., $40^{\circ}C$, 40 min., and pH 5. The cow leather color was red in the absence of mordanting, while it was red purple after being mordanted with Al and Cu, and purple mordanted with Fe. The K/S value of cow leathers increased in the order of the dyeing using $AlK(SO_4)_2$ > $CuSO_4$ > $FeSO_4$. The colorfastness to light and rubbing were reduced compared to original (untreated) cow leather. However dry cleaning fastness was very satisfactory, with a 4~5 rating. The dyed and pre-mordanting dyed cow leather showed excellent antibacterial properties.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.174-179
• /
• 2006

Dyeing and color fastness properties of a reactive disperse dye containing an acetoxyethylsulphone group on PET, Nylon, silk and N/P fabrics were examined. The reactive disperse dye exhibited almost the same dyeing properties on PET fabric as a conventional disperse dye except the level of dye uptake. The most appropriate pH and dyeing temperature for the dyeing of Nylon fabric were 7 and $100^{\circ}C$ respectively. The build-up on Nylon fabric was good and various color fastnesses were good to excellent due to the formation of the covalent bond. Application of the reactive disperse dye on silk fabric at pH 9 and $80^{\circ}C$ yielded optimum color strength. The rate of dyeing on Nylon fabric was faster than that on PET fabric when both fabrics were dyed simultaneously in a dye bath, accordingly color strength of the dyed Nylon was higher. The reactive disperse dye can be applied for one-step and one-bath dyeing of N/P mixture fabric with good color fastness.