• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.391-400
• /
• 2009

The purpose of this study is to investigate the efficacy of safflower yellow colorant as a natural dye for hair coloring. The dyeing properties of safflower yellow colorant on hair were explored to obtain optimum conditions. Also, the effect of mordant was studied in terms of dye uptake, colorfastness, and hair damage to better understand the characteristics of the colorant. Tensile strength measurement and SEM analysis were carried out for investigating hair damage to light exposure and washing. On the basis of obtained results considering possible hair damage, optimum dyeing conditions were set 100%(o.w.h.) colorant concentration, pH 5, $40^{\circ}C$, and 20min. Dye uptake was improved more effectively by repeated dyeing rather than by increasing concentration. Pre-mordanting method improved dye uptake slightly, irrespective of mordant type. The safflower yellow colorant produced Y colors on hair. Cu and Fe mordants improved washing and light fastness slightly. Better strength retention was obtained with the mordanted-dyed hair than the unmordanted-dyed hair after light irradiation for 40 hours and 10 repeated washing. The hair was more damaged by light exposure than by washing. It was concluded that the safflower yellow colorant can be used as a natural semi-permanent hair dye producing Y color without mordanting.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.194-206
• /
• 2010

This study was carried out to identify the optimum dyeing conditions for maximum dye uptake of Prunus yedoensis Matsumura flower extract on silk fabric and to investigate hue/tone characteristics and fastness properties of the dyed fabrics. As results, the flower extract was found to contain flavonoids by FT-IR and to show yellowish shade by UV-vis spectrum. Silk fabric was optimized for maximum dye uptake to five repetitions of dyeing at $80^{\circ}C$ for 60 min with an extract concentration of 600% owf in terms of both K/S and color differences. Pre-mordanting was more effective to dye uptake than post-mordanting for all of the mordants used. Un-mordanted and pre-mordanted fabric showed YR(Yellow Red) while most of post-mordanted ones did Y(Yellow). Main tones of dyed fabrics were sf(soft) and lt(light) in the case of unmordanting or Al-mordanting whereas they were d(dull) and g(grayish) by post-mordanting with Cu, Cr, and Fe, respectively. The fastness grades to rub and dry cleaning were reasonably good for most dyeing conditions while those to light were poor. Finally dyeing condition for each hue/tone of the dyed silk with the flower extract was optimized considering fastness properties.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.294-303
• /
• 2018

In this study, eco-friendly natural dyeing for pig leather was explored by using onion skin which is food waste. Sodium caseinate was used as a pre-treatment agent to improve dyeability of pig leather and its effect on dye uptake was investigated according to treatment concentration. Dye uptake of the pre-treated pig leather was increased by about two times compared to untreated one at 0.2% pre-treatment concentration. Onion skin colorant imparted YR color on pig leather. After mordanting, the color of pretreated/dyed pig leather was varied from brick-red to khaki shades. However, mordanting did not improved dye uptake of the pre-treated/dyed pig leather significantly. The color-fastnesses of un-mordanted samples to light, dry cleaning, rubbing were grades 3-4, 5, and 4, respectively, which is good enough to meet all Korean Standard for Fastness of leather products. After mordanting, the light fastness of pig leather was improved to 4, 4-5 grade. The efficacy of sodium caseinate as a pre-treatment agent for pig leather was verified by improved dye uptake and good colorfastness. And, the natural dyeing of pig leather using food waste would be a significant sustainable way in terms of eco-friendliness and reuse of biomass to reduce environmental pollution.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.25-32
• /
• 1998

In the prior study, we found that the dye uptakes of C. I. Disperse Violet 1 on PET in hexane and cyclohexane were higher than those in the other solvents. Therefore, in this study, the dye uptakes and the partition coefficients in alkanes having different number of carbon atoms were obtained and their relationship to the solubilities of the dye in alkanes was also investigated. As the number of carbon atoms of alkanes increases, solubility of the dye increases but the dye uptake decreases. This is due to the fact that the hydrophobicity of alkanes become relatively strong as increasing the number of carbon atoms. It was also found that the dye uptakes in iso-alkanes were larger than those in normal alkanes. This is because that the branched alkanes(iso-alkanes), judging from the tendency of lowering solubility and increasing dye uptake as decreasing the number of carbon atoms of alkanes, behave like the alkanes with less number of carbon atoms rather than the alkanes with the same number of carbon atoms. The logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are linearly and inversely proportional to the solubilities. This is in good accordance with the results of the prior study. The heat of dyeing was also calculated from the equilibrium adsorptions at various temperatures. It seemed that the dyeings of PET by C. I. Disperse Violet 1 in nonane, decane, iso-pentane and iso-octane were rather endothermic processes. Dyeing rates in alkanes were somewhat delayed unlike general appearances in solvent dyeing.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.208-215
• /
• 2018

The objective was to investigate the efficacy of Metasequoia(Metasequoia glyptostroboides) cone colorants as a new functional dye for wool fiber. Effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated for wool fiber. Compared with cotton and silk fibers, wool fiber showed better affinity for the Metasequoia cone colorants. Fe and Cu mordants improved dye uptake, and mordanting did not change the color of dyed fabric with YR Munsell color. Colorfastness to rubbing and washing was as good as grade 4, whereas lightfastness of the dyed fabrics was above grade 3. Antimicrobial activity of the colorants was very high 99.3% of reduction rate toward S. aureus. It was confirmed that Metasequoia cone colorants can be utilized as a new functional natural dye for wool fiber. In addition, considering its high antimicrobial functionality it could be applied to cosmetics and food.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.218-229
• /
• 2011

Dyeing properties of cotton and ramie fabrics with pine needles colorants were studied by investigating the analysis of pine needles colorants, the effect of dyeing conditions (such as dye concentration, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for pine needles extract was 285nm, and pine needles colorants produced a yellow color. From FT-IR and GC-MS results, it was assumed that chromophoric substance from pine needles extracts were mixed with flavonol tannin and flavanol tannin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting and the dye uptake of fabrics improved by mordanting. The colorfastness of dyed fabrics showed a low rating; however, colorfastness to washing and dry cleaning of cotton fabrics mordanted with N.Cu, and friction fastness of ramie fabric mordanted with Cu improved. The dyed fabrics showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.206-217
• /
• 2011

The dyeing properties of cotton fabrics with bamboo colorants were studied by investigating the analysis of bamboo colorants, the effect of dyeing conditions (dye concentrations, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for bamboo stems and leaves extracts was found to be 280nm and 295nm, respectively; in addition, bamboo colorants produced a yellow color. From the FT-IR and GC-MS results, it was assumed that the chromophoric substance from bamboo extracts was composed of flavones substances with tricin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. The post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for an increased dye uptake. The color of fabrics mordanted with Cu and N.Cu changed to GY. Regardless of mordanting, the colorfastness on the washing of dyed fabrics showed a low rating compared to other fastness. Mordanting adversely affected the lightfastness of dyed fabric. The dyed fabric showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in cotton fabric dyed with bamboo extracts.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.113-118
• /
• 2007

It is well recognized that the wicking of liquids in a textile fabric takes place mainly through a capillary system composed of the individual fibers. Considering typical dyeing stages, it is thought that a high dye uptake on the fabric probably depends on the wickability. Three kinds of barely water soluble ketones, acetophenone(A), 2-pentanone(2P) and 3-pentanone(3P) were separately dissolved in methanol(M) and then each was mixed with aqueous solution of C. I. Red Acid 114. Wicking heights of dyeing solutions were measured under such conditions that the effect of gravity was negligible. The result could be graphed as a series of straight lines having the form s = $kt^{1/2}$, where s was distance traveled by the solutions, t was time, and k was slope of the line. The surface tension(${\gamma}$) of the ketones had more signifcant effect on the wickability compared to the viscosity(${\eta}$) of them. The greater wickability resulted in the higher dye uptake on the fabric and the order of wickabilty was equal to that of the surface tension(${\gamma}$) and dye uptake on the fabric, A>3P>2P>M.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.119-123
• /
• 2007

Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

• Journal of Fashion Business
• /
• v.13 no.1
• /
• pp.115-124
• /
• 2009

Chitosan and CA/BTCA were employed in order to induce crosslinking in the fiber for the improvement of wrinkle recovery of the cotton fabrics and the endowment of anti-microbial functions to the fabric. The treated fabrics were dyed by using reactive dyestuff and their dyeing behaviors were investigated. As a result, the fabric treated with chitosan only exhibited more dye-uptake amount than the untreated fabric, and the treated and untreated fabrics together showed excellent light-fastness and wash-fastness. In the cases that CA or BTCA was added to the chitosan, the CA-treated showed better dye-uptake and dyeing properties as light-fastness than the BTCA-treated. In conclusion, it is possible to maintain the dye-uptake level at reduced treatment cost when the CA is employed as a substitute cross-linking agent for BTCA.