• 제목/요약/키워드: Duty period

검색결과 252건 처리시간 0.036초

주기적 연료공급에 따른 화염거동에 관한 실험적 연구 (An experimental study on flame characteristics with periodical fuel supply)

  • 이태원;이동혁;정석호
    • 오토저널
    • /
    • 제14권4호
    • /
    • pp.50-60
    • /
    • 1992
  • Flame characteristics of periodic fuel jets were studied experimentally by supplying the fuel periodically using solenoid valve. Flame was observed using a high speed camera, a 35 mm camera and a cathetometer. Hot-wire ananometer was used to meature the speed of fuel flow at the nozzle exit to analyze the flow characteristics. Various types of flame characteristics such as the flame lift-off and extinction were observed for different ranges of period, duty, and flow rate, but the flame shape was not affected much by the variation in the flow rate. Decreasing duty of the pulses applied to the solenoid valve promotes lift-off and enhances premixed flame characteristics.

  • PDF

An Adaptive MAC Protocol considering Real Time in Wireless Sensor Networks

  • 온정석;김재현;오영열;이재용
    • 한국통신학회논문지
    • /
    • 제32권12A호
    • /
    • pp.1329-1338
    • /
    • 2007
  • Leading MAC protocols developed for duty-cycled WSNs such as B-MAC employ a long preamble and channel sampling. The long preamble introduces excess latency at each hop and suffers from excess energy consumption at non-target receivers. In this paper we propose AS-MAC (Asynchronous Sensor MAC), a low power MAC protocol for wireless sensor networks (WSNs). AS-MAC solves these problems by employing a series of preload approach that retains the advantages of low power listening and independent sleep schedule. Moreover AS-MAC offers an additional advantage such as flexible duty cycle as data rate varies. We demonstrate that AS-MAC is better performance than B-MAC through analysis and evaluation.

승압인덕턴스 분산형 PWM 정류기 (Boosting Inductor Distribution Type PWM Rectifier)

  • 이무영;김우현;마진석;임성운;권우현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.1940-1943
    • /
    • 1998
  • A new PWM rectifier which offers a unity power factor is proposed. The circuit has same inductance as the conventional boosting type PWM rectifier in powering mode, but the inductance is splitted to 2 part in freewheeling mode. So the period of freewheeling mode is shorter than that of conventional boosting type PWM rectifier, and discontinuous input current is obtained in wide duty range. Therefore the proposed PWM rectifier accomplishs a unity power factor in wide range of duty ratio and boosting factor. And the conventional boosting type PWM rectifier has poor power factor near the unity boosting ratio, the proposed PWM rectifier improves this problem. The mathmatical analysis are presented and experimental results are given.

  • PDF

시민권 담론의 두 얼굴 - Marshall의 사회적 시민권에 대한 재해석을 중심으로 - (Two Face of Citizenship Discourse - Reinterpretation of Social Citizenship of Marshall -)

  • 서정희
    • 사회복지연구
    • /
    • 제39호
    • /
    • pp.147-165
    • /
    • 2008
  • 본 연구는 시민권 담론의 부활의 시기인 1990년대의 사회적 시민권에 대한 담론 논쟁의 두 측면을 분석하였다. 복지국가 재편기 시기에 사회적 시민권 담론 논쟁은 시민권론의 본질에 대한 서로 다른 해석에서 비롯된다. 한 편에서는 복지국가의 기본 축은 사회적 시민권의 권리성이라고 주장하고, 다른 한편에서는 시민권은 권리와 의무 두 축으로 구성되어 있고 이는 개인의 책임과 의무가 선행되어야 권리를 실현할 수 있다고 주장한다. 특히 후자의 논의는 개인의 책임과 의무 중 가장 중요한 의무는 노동의무라고 주장하면서 이후 근로연계복지 정책의 이론적 기반으로 작용한다. 본 연구는 Marshall의 이론을 기반으로 한 상반되는 두 담론을 구체적으로 분석하여 이 중 어느 담론이 Marshall에 대한 올바른 해석인지 규명하고자 하였다. 신우파와 보수당 정부 그리고 신노동당 정부 등은 자신들의 복지축소와 개인의무 강화를 정당화하기 위하여 Marshall의 시민권론에서 근거를 찾고자 하나, 이는 Marshall의 시민권에 대한 왜곡이다. Marshall은 자신의 저서에서 시민권이 권리와 의무 두 축으로 구성되어 있으나 이는 의무 충족이 권리 실현의 전제조건이 아니라는 점을 명백히 밝히고 있다.

방제선 등 배치의무의 법적 성질 및 민간개방의 정당성에 관한 연구 (A Study on the Legal Nature of the Duty to Arrange Spill Clean-up Equipment and the Issue on the Justification of Its Privatization)

  • 이정원
    • 해양정책연구
    • /
    • 제33권2호
    • /
    • pp.83-119
    • /
    • 2018
  • Under the Korean Marine Environment Management Act (hereunder, the KMEMA), the duty to arrange spill clean-up equipments, including spill clean-up vessels, required by the article 67 of the KMEMA is in essence the provision of public goods since it is a precautionary or preventive measure for the efficient performance of oil spill cleaning up. Also the obligation to control marine pollution and the duty to arrange of anti-pollution measures imposed on polluters is the obligation imposed by the public law in accordance with "the Polluter-Pays Principle". Therefore, the execution of such obligations shall be accompanied by the minimum legal and institutional arrangements. On the other hand, judging whether to form the roles of the public and private sectors in providing public goods is basically a matter of policy decision. However, even if the private sector is allowed to participate in the provision of public goods, it is imperative that a minimum requirement be provided to secure the public interest. Although major countries allows polluters to conclude a preliminary contract with a civil anti-pollution management company, these civilian institutions are in principle constituted by the owners of oil storage facilities. Additionally it is worth noting that it operates as a non-profit organization. In particular, if the practitioner performs pollution control for commercial purposes, their profitability may depend on the size of the pollution, the period spent on pollution control, the size of the equipment and manpower mobilized in the pollution control, and so on. Considering the above problems, caution should be taken to allow marine environmental management companies to be un-limitedly entrusted with the responsibility of arranging measures such as pollution control. In order to allow the marine environmental management contractor to be entrusted for the assignment of duty to protect the marine environment, the marine environment management business should be expanded so that the marine pollutant management capacity satisfies the statutory control capacity. For this purpose, it is necessary to manage and supervise the maintenance and improvement of the control capability of the marine environment management business. It is also necessary to discuss the introduction of the grading system for the control ability of the civil control companies alike in major countries.

Suggestion to Improve Power Efficiency by Changing Sleep-Wakeup Period in Wireless Network Environment for Internet of things

  • Woo, Eun-Ju;Moon, Yu-Sung;Choi, Jae-Hyun;Kim, Jae-Hoon;Kim, Jung-Won
    • 전기전자학회논문지
    • /
    • 제22권3호
    • /
    • pp.862-865
    • /
    • 2018
  • The proposed scheme minimizes the Idle time under the residual energy of the sensor node to adjust the Sleep-Wakeup period and minimize unnecessary energy consumption. It is The proposed scheme minimizes the Idle time under the residual energy of the sensor node to adjust the Sleep-Wakeup period and minimize unnecessary energy consumption. It is an important process to control the Application Packet Framework including the PHY and the MAC layer at each node's Idle time with the Idle time mechanism state before the proposed function is executed. The Current Control Level of the Report Attribute is fixed at one sending / receiving node where power consumption can occur, by changing Sleep-Wakeup time, the low power consumption efficiency was improved while satisfying the transmission requirement of the given delay time constraint.

An Energy Efficient MAC Protocol Providing Guaranteed Service for Wireless Sensor Network

  • Kim, Dong-Won;Park, Tae-Geon
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권1호
    • /
    • pp.123-140
    • /
    • 2011
  • In this paper, we propose an Energy Efficient Media Access Control (EE-MAC) protocol for wireless sensor networks. The proposed scheme is designed to save power consumption and guarantee quality-of-service for real-time traffic. EE-MAC uses the superframe structure which is bounded by the transmission of a beacon frame and can have an active and an inactive portion. The active period is divided into the contention free period (CFP) for real-time traffic transmission and the contention access period (CAP) for non-real-time traffic transmission. We propose the exclusively allocated backoff scheme which assigns a unique backoff time value to each real-time node based on bandwidth allocation and admission control. This scheme can avoid collision between real-time nodes by controlling distributed fashion and take effect a statistical time division multiple access. We also propose the algorithm to change the duty cycle adaptively according to channel utilization of media depending on network traffic load. This algorithm can prolong network lifetime by reducing the amount of energy wasted on idle listening.

Optical Power Transfer of Grating-Assisted Directional Coupler with Three-Guiding Channels: TM modes Case

  • 호광춘
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.126-130
    • /
    • 2003
  • The optical power transfer of TM modes in grating-assisted directional couplers (GADCs) with three-guiding channels is rigorously evaluated by defining a novel coupling efficiency amenable to the rigorous analytical solutions of modal transmission-line theory (MTLT). The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the period, the duty cycle, and wavelength.

  • PDF

Optical Power Transfer of Grating - Assisted Directional Coupler with Three - Guiding Channels : TM modes Case

  • Ho, Kwang-Chun;Ho, Kwang-Soo
    • Journal of the Optical Society of Korea
    • /
    • 제8권4호
    • /
    • pp.149-155
    • /
    • 2004
  • Newly developed modal transmission-line theory(MTLT) is used to analyze rigorously the optical power distribution in grating-assisted directional couplers(GADCs) with three guiding channels. By defining a novel coupling efficiency ${\eta}$ amenable to the rigorous analytical solutions of modal transmission-line theory, we explicitly evaluate the power coupling and distribution of TM modes. The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the grating period, the duty cycle, and the operating wavelength.

디퓨져와 노즐을 이용한 열공압형 마이크로 펌프의 열공압 및 유동특성에 관한 수치해석적 연구 (A Numerical Study on the Thermopneumatic and Flow Characteristics of Diffuser-Nozzle Based Thermopneumatic Micropumps)

  • 정진;김창녕
    • 설비공학논문집
    • /
    • 제17권7호
    • /
    • pp.642-648
    • /
    • 2005
  • This study has been conducted to investigate the thermopneumatic and flow characteristics of diffuser/nozzle based thermopneumatic micropumps. In this study, a transient three-dimensional numerical analysis using FSI (Fluid-Structure Interaction) model has been employed to analyze the effects of the interaction between the membrane and two fluids (air and water) in the thermopneumtic micropump. The transient temperature and pressure in the cavity, the transient displacements of the membrane and the net flow rate of the micropump have been closely calculated for the frequency of 1 Hz. It has been found that the difference of the flow rates at the inlet and outlet is larger in the cooling period than in the heating period and that the duty ratio is very important in association with pump performance because the temperature in the cavity ascends drastically in the heating period and descends slowly in the cooling period. This study can be regarded as fundamental understandings for the design and analysis of thermopneumatic micropumps.