• 제목/요약/키워드: Duty Model

검색결과 369건 처리시간 0.029초

Strategic Communication for Establishing Collectivity for UN International Day of Clean Air for Blue Skies

  • Song, Jaeryoung;Yoo, Sunwook;Lim, Jung Yun;Ko, Yealim
    • Asian Journal of Innovation and Policy
    • /
    • 제9권1호
    • /
    • pp.95-105
    • /
    • 2020
  • Air pollution is a global challenge that not only threatens public health, but also takes away lives. Strategic communication, in other words, public relations, is an essential way of tackling air pollution and managing the risks involved. Engaging global citizens into the public sphere requires the building of a sense of collectivity and duty on achieving clean air. Strategies and policies on an international scale that are based on the theoretical framework (Behavior Procedure Model) and focus on leading citizens into the mature and unified Collectivity during the observance of the 'International Day of Clean Air for blue skies' are crucial. Notably, the Asian continent has inevitably found itself at the crossroad between economic growth and environmental protection, and has even been observed to be pursuing a passive response to air pollution. The key communication strategies are supported by the three goals, which include: expanding existing communities and building a new Collectivity, supporting international solidarity and individual member state activities, and implementing systems and structures. The key goals can be further specified into six strategies. This paper has analyzed global problems and discussed possible communication strategies to increase public engagement for the observation of the 'International Day of Clean Air for blue skies.' It will be the responsibility of all nations to implement the aforementioned strategies and policies as well as promoting global action.

직무자율성이 혁신행동에 미치는 영향 -직무열의의 매개효과를 중심으로- (The effects of Job Autonomy on Innovative Behavior: Mediating Effect of Job Engagement)

  • 진윤희;김성종
    • 한국콘텐츠학회논문지
    • /
    • 제15권1호
    • /
    • pp.451-461
    • /
    • 2015
  • 공기업에서 혁신행동을 유발하는 요인에 관한 선행연구가 부족하다는 문제에서 출발하여 직무자율성을 혁신행동에 영향을 미치는 변수로 가설을 설정하고 실증적 분석결과로 부터 정책적 시사점을 도출하고자 연구가 수행되었다. 공공조직의 구성원의 혁신행동에 관한 이론이 잘 정립되지 못해 일반 조직행태 분야 선행연구에서 주로 사용하는 직무자율성, 직무열의 등의 변수들이 공공조직의 혁신행동에도 영향을 미칠 것으로 가정하고 연구를 기획하였다. 구조방정식 모형을 통해 가설 검증이 이루어졌고 분석결과 직무자율성인식과 혁신행동의 관계에서 직무열의가 부분적 매개변수로 작용함이 나타났다. 직무열의가 직무자율성인식과 혁신행동의 관계에서 매개적 역할을 한다는 것은 행동의 준비상태인 태도를 구성하는 인지적, 감정적, 행동적 요소에 대한 경험적 분석을 통한 확인이라는 점에서 이론적 기여가 있다. 실무적 차원에서는 공기업에서도 직무자율성을 높이는 것을 통해 적극적이고 진취적인 태도를 불러일으키고 혁신행동을 격려하는 수단으로 활용할 수 있음을 의미한다. 성과관리와 같은 제도적 수단과 함께 업무계획의 수립, 업무수행방법의 선택 등에 관한 결정을 할 수 있는 자율성을 보장해줌으로써 직무수행과정에서 열정을 느끼고 궁극적으로 혁신행동을 유발할 수 있게 됨을 의미한다고 하겠다.

Review of Mathematical Models in Performance Calculation of Screw Compressors

  • Stosic, Nikola;Smith, Ian K.;Kovacevic, Ahmed;Mujic, Elvedin
    • International Journal of Fluid Machinery and Systems
    • /
    • 제4권2호
    • /
    • pp.271-288
    • /
    • 2011
  • The mathematical modelling of screw compressor processes and its implementation in their design began about 30 years ago with the publication of several pioneering papers on this topic, mainly at Purdue Compressor Conferences. This led to the gradual introduction of computer aided design, which, in turn, resulted in huge improvements in these machines, especially in oil-flooded air compressors, where the market is very competitive. A review of progress in such methods is presented in this paper together with their application in successful compressor designs. As a result of their introduction, even small details are now considered significant in efforts to improve performance and reduce costs. Despite this, there are still possibilities to introduce new methods and procedures for improved rotor profiles, design optimisation for each specified duty and specialized compressor design, all of which can lead to a better product and new areas of application. A review of methods and procedures which lead to modern screw compressor practice is presented in this paper. This paper is intended to give a cross section through activities being done in mathematical modelling of screw compressor process through last five decades. It is expected to serve as a basis for further contributions in the area and as a challenge to the forthcoming generations of scientists and engineers to concentrate their efforts in finding future and more extended approaches and submit their contributions.

Eco-System: 클라우드 컴퓨팅환경에서 REC 가격예측 시뮬레이션 (Eco-System: REC Price Prediction Simulation in Cloud Computing Environment)

  • 조규철
    • 한국시뮬레이션학회논문지
    • /
    • 제23권4호
    • /
    • pp.1-8
    • /
    • 2014
  • 클라우드 컴퓨팅은 정보의 다양성과 빅데이터를 IT자원을 이용하여 처리할 수 있는 컴퓨팅 개념이다. 정부는 신재생에너지를 활용한 전력생산을 장려하기 위해 RPS를 시행하였고 시스템을 구축하여 지리적으로 분산되어 있는 빅데이터를 수집하여 운영하고 있다. RPS제도를 이행하는 발전사업자들은 의무할당량 중 REC 부족분을 타 발전사업자들로부터 REC를 구매하여 조달해야 한다. REC는 자율시장에 근거하여 거래되고 있고, 매매가격의 편차가 크기 때문에 RPS 빅데이터를 통해 형평성있는 REC가격을 예측할 필요가 있다. 본 연구에서는 부정확한 가격추이와 규칙을 정량적으로 표현하여, 클라우드 환경에서 퍼지기반으로 REC가격을 예측하는 방법을 제안한다. 클라우드 환경에서 RPS 빅데이터를 통한 상호연관성과 가격결정에 영향을 주는 변수들에 대한 분석이 가능하고 시뮬레이션을 통해 REC 가격을 예측할 수 있다. 클라우드 환경에서 퍼지로직은 매물수량과 매매가격을 이용하여 투명성있는 REC 가격을 예측하고 장기적으로 수렴된 가격을 제시할 것이다.

경찰 이미지 제고에 대한 주관적 인식유형 (The Subjectivity Perceptions of the Image of the Police)

  • 양창훈;이제영
    • 한국콘텐츠학회논문지
    • /
    • 제13권2호
    • /
    • pp.220-234
    • /
    • 2013
  • 본 연구는 Q방법론을 통해 국가경찰 이미지 제고에 대한 주관적 인식유형의 특성과 함의를 알아보고, 이에 따라 국민의 신뢰도 회복을 위해 경찰의 이미지를 실천적으로 개선하는 방안을 모색하고자 하였다. 이에 본 연구는 기존의 연구방법론에서는 간과하기 쉬운 개별 응답자의 주관적 인식을 객관적으로 측정할 수 있는 Q방법론을 활용하여 국가경찰 이미지 제고에 대한 인식유형을 분석함으로써 향후 실증연구를 위한 탐색적 과정을 제시하였다. 분석 결과, 경찰 이미지 제고에 대한 인식은 교육 및 인력 관리의 중요성을 강조하는 교육 및 인력 관리형, 의무 준수의 필요성을 강조하는 의무 준수형, 공공인식을 중요하게 생각하는 이미지 추구형, 그리고 경찰관의 대우와 공정한 법집행을 강조하는 법적 개선형 등 4가지 유형으로 분류되었으며, 응답자의 주관성 인식에 따라 경찰 이미지 제고에 대한 유형별 특성이 차이를 갖는 것으로 나타났다. 이러한 분석 결과를 기반으로 본 연구는 Q방법론의 활용 가능성과 실증연구를 위한 탐색적 연구로서 그 유용성을 제공할 것으로 본다.

MCNP코드 시스템을 이용한 차폐물 geometry에 따른 결과 변화에 대한 연구 (Changes according to the geometry of the shield using MCNP code system)

  • 강기병;이남호;황영관
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 춘계학술대회
    • /
    • pp.1031-1033
    • /
    • 2013
  • 후쿠시마와 같은 방사선 누출 사고 시 방사선원의 위치를 찾는 일은 방사선 방호 뿐만 아니라 원전 사고의 조속하고 안전한 처리를 위해서도 중요하다. 방사선원의 3차원 위치 탐지는 기존에 방사선 탐지기의 2차원적 방사선 위치 탐지기능에 방사선원의 거리정보까지 추가 제공할 수 있어 방사선 오염원의 제거 및 제염작업에 결정적 역할을 할 수 있다. 본 연구에서는 반도체 센서에 기반한 듀얼(Dual) 방사선 탐지기를 이용한 방사선원 3차원 가시장치 개발 연구의 일환으로 방사선 센서부의 효율적 차폐체 구조설계에 관한 결과를 논하였다. 고하중의 텅스텐 또는 납 차폐체를 MCNP기반으로 최적구조로 설계함으로써 경량의 고효율 방사선원 위치탐지기 구현을 시도하였고, 이를 위해 차폐체의 구조와 두께, 그리고 콜리메이터에 형상의 다양한 변수모델에 대한 방사선 차폐시뮬레이션을 수행하였다. 본 연구의 결과는 향후 실리콘 센서기반의 소형 경량의 3차원 방사선원 탐지 및 가시화 연구에 활용될 예정이다.

  • PDF

백금계 촉매상에서 산화질소(NO)의 산화반응속도에 관한 실험 및 모델링 연구 (An Experimental and Modeling Study on the Oxidation Kinetics of Nitric Oxide over Platinum-based Catalysts)

  • 김영득;정수진;김우승
    • 한국자동차공학회논문집
    • /
    • 제20권5호
    • /
    • pp.71-80
    • /
    • 2012
  • To improve the $NO_X$ conversion over a SCR (selective catalytic reduction) catalyst, the DOC (diesel oxidation catalyst) is usually placed upstream of the SCR catalyst to enhance the fast SCR reaction ($4NH_3+2NO+2NO_2{\rightarrow}4N_2+6H_2O$) using equimolar amounts of NO and $NO_2$. Here, a ratio of $NO_2/NO_X$ above 50% should be avoided, because the reaction with $NO_2$ only ($4NH_3+4NO+O_2{\rightarrow}4N_2+6H_2O$) is slower than the standard SCR reaction ($4NH_3+4NO+O_2{\rightarrow}4N_2+6H_2O$). In order to accurately predict the performance characteristics of SCR catalysts, it is therefore desired to develop a more simple and reliable mathematical and kinetic models on the oxidation kinetics of nitric oxide over a DOC. In the present work, the prediction accuracy and limit of three different chemical reaction kinetics models are presented to describe the chemicophysical characteristics and conversion performance of DOCs. Steady-state experiments with DOCs mounted on a light-duty four-cylinder 2.0-L turbocharged diesel engine then are performed, using an engine-dynamometer system to calibrate the kinetic parameters such as activation energies and preexponential factors of heterogeneous reactions. The reaction kinetics for NO oxidation over Pt-based catalysts is determined in conjunction with a transient one-dimensional (1D) heterogeneous plug flow reactor (PFR) model with diesel exhaust gas temperatures in the range of 115~$525^{\circ}C$ and space velocities in the range of $(0.4{\sim}6.5){\times}10^5\;h^{-1}$.

간호사와 의사 간의 협력에 관한 이론적 고찰 (Literature Review with Collaboration Between doctors and nurses)

  • 우선혜
    • 가정∙방문간호학회지
    • /
    • 제7권1호
    • /
    • pp.73-82
    • /
    • 2000
  • Twenty-first century coming of health care in our country is in a situation of much conflict because the relationship between nurses and doctors is seen in terms of a traditional and vertical structure. Accordingly. it is very difficult to find collaboration amongst individuals of these two professions. Now nursing is trying to find independence and autonomy by carrying out independent professional skills. This study on collaboration and the obstacles hindering its pursuit. The strategies of collaboration to give better health care quality are as follows; First, a program for professionals should be developed to enhance professional knowledge and technology and train nursing professionals so that nursing can be acknowledged as a profession with a power to carry out on independent job. Second, collaboration reduces expenses and results in satisfactory performances of duty, high productivity, low incidence of medical accident, and higher satisfaction of the patient. Therefore the leader in the higher position should take positive stance for collaboration and help create a cooperative situation through the development of practical orders for collaboration. opening cooperative wards, and meeting for collaboration. Third, a collaboration model should be introduced into the courses of the nursing and medical school curriculum, which would influence job atmosphere after graduation. Fourth, nurses should have pride in their jobs as professionals and have confidence in their professional skill, knowledge and ability. Nurses should make an effort to share responsibility and have independence and autonomy. Fifth, common people as well as doctors know little about professional practice and the role of nurses, so a publicity campaign is also required.

  • PDF

열관과 상변화물질을 일체형으로 병렬 배열한 위성용 열제어 부품 연구 (Study on the Satellite Thermal Control Hardware Composed of Two Parallel Channels Working for Heat Pipe and Phase Change Material)

  • 김택영;현범석;이장준;이주훈
    • 한국항공우주학회지
    • /
    • 제38권11호
    • /
    • pp.1087-1093
    • /
    • 2010
  • 열관(HP)과 상변화물질(PCM)을 병렬로 배열한 일체형 위성 열제어 H/W를 제안하였다. HP-PCM 모듈은 제한적인 의미에서 일종의 off-the-shelf 부품으로써, PCM을 위한 별도의 열설계와 형상설계 등을 수행하지 않더라도 기존에 사용하고 있는 HP처럼 크기나 개수 등만을 설계함으로써 온도제어를 달성할 수 있도록 하였다. 주기적인 발열이 있는 부품의 온도제어를 위하여, 제안한 HP-PCM 모듈이 적용된 위성 방열판을 설계하고 상세모델을 수립하여 수치해석을 수행하였다. 각각 PCM이 없는 경우와 PCM을 장입한 경우에 대하여 수치해석을 수행하였으며, 등가평균값의 주기적인 변화에 대한 비교분석을 통하여 PCM의 축열과 방열에 의한 열분산이 매우 효과적임을 확인하였다. HP가 작동하지 않는 경우에 대한 수치해석을 통하여 열전도도가 작은 PCM의 사용한계를 제안한 HP-PCM 모듈을 이용하여 극복할 수 있음을 확인하였다.

원격송신국을 활용하는 이종 네트워크 시스템의 성능 개선 방안 (A Performance Enhancement Scheme for Heterogeneous Network Systems Utilizing Remote Radio Heads)

  • 유형길;성원진
    • 한국통신학회논문지
    • /
    • 제37권1B호
    • /
    • pp.31-38
    • /
    • 2012
  • 본 논문에서는 원격송신국을 활용하는 이종 네트워크 시스템 (HetNet, heterogeneous network)에서 다수의 전송 노드가 협력적으로 신호를 전송하여 셀 경계에 위치한 사용자의 성능 개선을 위한 방법을 제안한다. 이를 위해 셀 경계지역의 특정 위치에 원격송신국을 배치하며, 기지국과 셀 경계 원격송신국 간의 동작 빈도를 조정함으로써 효율적인 동작 방식을 제안한다. 특히 제안방식에서는 LTE-Advanced (Long Term Evolution - Advanced) 표준 회의에서 논의되고 있는 CoMP (coordinated multi-point transmission and reception) 시나리오에서의 시스템 모델 파라미터를 사용한 컴퓨터 시뮬레이션을 활용하여 실험 결과의 신뢰성을 높였다. 또한 기존의 방식과의 비교를 통해 셀 경계지역에 원격송신국을 위치시킴으로 특히 평균 전송률 측면의 하위 사용자 성능을 향상시키는 효과가 있음을 보임으로써 사용자 간의 공평성 문제를 개선할 수 있는 방식임을 입증한다.