• 접착 및 계면
• /
• 제25권2호
• /
• pp.63-68
• /
• 2024

본 연구에서는 반도체 패키지용 와이어 본딩 공정에서 금(Au) wire의 표면처리에 적용되는 린스의 종류에 따른 Au wire의 오염 현상을 확인하고자 하였다. Au wire의 표면처리를 위해 실리콘(Si) 성분이 함유된 린스와 유기 계통으로만 이루어진 린스를 주로 사용하고 있으며, 실제 영향성을 확인하기 위해 두 종류의 1.0wt% 린스 용액으로 Au wire에 표면처리를 진행하였다. 이후, 반도체 공정에서 발생할 수 있는 Si 성분이 포함된 분진과의 반응성을 확인하기 위한 모사 실험을 진행하였다. 그 결과, optical microscopy(OM) 및 scanning electron microscopy(SEM) 분석을 통해 Si 성분이 함유된 린스로 표면처리한 Au wire의 경우 분진이 다량 흡착되었으며, 유기 계통으로만 이루어진 린스로 표면처리한 Au wire에는 소량의 분진이 흡착된 것을 확인하였다. 이는 Si 성분이 함유된 린스의 경우 상대적으로 극성을 띠기에, 주성분이 극성인 분진과 극성 상호작용을 일으키기 때문이다. 따라서 Si 성분이 존재하지 않는 린스를 사용하여 Au wire를 표면처리할 경우 분진에 의한 오염 현상이 감소하여 실제 와이어 본딩 공정에서 불량률을 낮추는 효과를 볼 수 있을 것으로 기대한다.

• 한국환경농학회지
• /
• 제28권2호
• /
• pp.158-164
• /
• 2009

왕겨와 톱밥 3종(미송, 참나무, 포플러)을 sodium hydroxide(NaOH)와 tartaric acid($C_4H_6O_6$)를 처리한 후 중금속 흡착특성을 평가한 결과 모든 소재에서 중금속 선택성은 Pb > Cu > Cd > Zn 순으로 나타났다. 참나무 톱밥(NaOH로 개질)은 Pb(19.36 mg $g^{-1}$)과 Cu(13.47 mg $g^{-1}$)에 대해 그리고 왕겨(tartaric acid로 개질)는 Cd(5.37 mg $g^{-1}$)과 Zn(2.24 mg $g^{-1}$)에 대해 뛰어난 흡착능을 나타내었다. SEM 분석결과 4가지 소재에서 모두 NaOH 개질 후에 표면의 불순물이 제거됨이 확인되었고 흡착표면이 매끄럽게 안정화 된 것을 관찰할 수 있었다. FT-IR 분석결과 왕겨는 1080 $cm^{-1}$에서 carbonyl group, hydroxyl group 등의 관능기가 존재함을 확인하였고 tartaric acid로 개질한 경우 1184 $cm^{-1}$와 1735 $cm^{-1}$에서 carboxylate group, carboxyl group, methylene group 등의 새로운 관능기가 생성됨을 확인하였다. 3종의 톱밥(미송, 참나무, 포플러)에 대한 FT-IR 분석결과 왕겨와 유사한 peak가 관찰되었는데 1030 $cm^{-1}$에서 carbonyl group과 hydroxyl group, 1200 $cm^{-1}$과 1700 $cm^{-1}$ 사이에서 carboxylate group, carboxyl group, methylene group 등이 이에 해당하였다. 한편 NaOH로 개질한 경우 peak에서 큰 변화를 나타내지 않았으나 흡착량이 증가한 것은 표면개질로 새로운 관능기가 생성되지는 않았으나 표면의 불순물이 제거.안정화됨으로써 흡착 표면적이 증가되었기 때문인 것으로 판단되었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1777-1780
• /
• 2007

The synthesis of well-defined dendrons based on aliphatic polyether dendritic cores and glassy polystyrene peripheries is described. The synthetic route involves a combination of living anionic polymerization and a stepwise convergent method consisting of iterative Williamson etherification and hydroboration/oxidation reactions. On the basis of molecular weight, as characterized by gel permeation chromatography (GPC), the first generation dendron (Generation-1) shows a random coil conformation like a linear polystyrene, while higher generations (Generation-2 and 3) reveal globular forms in solution.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.336-339
• /
• 2006

With the steady depletion off fossil fuel reserves, hydrogen based energy sources become increasingly attractive. Therefore hydrogen production or separation technologies, such as Bas separation membrane based on adsorption technology, have received enormous attention in the industrial and academic fields. In this study, the transport mechanisms of the MTES (methyltriethoxysilane) templating silica/a-alumina composite membrane were evaluated by using unary, binary and quaternary hydrogen gas mixtures permeation experiments at unsteady- and steady-states. Since the permeation flux in the MTES membrane, through the experimental and theoretical study, was affected by molecular sieving effects as well as surface diffusion properties, the kinetic and equilibrium separation should be considered simultaneously in the membrane according to molecular properties. In order to depict the transient multi-component permeation on the templating silica membrane, the GMS (generalized Maxwell-Stefan) and DGM (dust Bas model) were adapted to unsteady-state material balance

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.55-56
• /
• 2022

As global warming becomes serious, research is continuously being conducted to reduce CO2 emissions. Among building materials, the carbon emission of cement is so high that it accounts for 6.8% of the carbon emission of the entire industry. Studies replacement of cement with blast furnace slag and fly ash are steadily increasing. In addition, efforts are being made to reduce air pollution due to increased damage caused by increased concentrations of harmful substances such as fine dust and heavy metals in the air. There is an increasing number of studies that enable adsorption by mixing adsorbents into building materials. This study reviewed the strength properties to make an adsorbable non-cement finishing material by mixing tourmaline, an adsorbent, based on the non-cement composite, and confirmed that the strength decreases as the replacement ratio increases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.217-218
• /
• 2021

With the prolonged Covid-19 epidemic, movement restrictions such as social distancing are prolonged, and as people stay indoors for a longer time, interest in indoor air pollution is increasing. Indoor air quality is not easily purified unlike outdoors. Among indoor building materials, paints and flooring contain formaldehyde that causes sick house syndrome and VOCs that contain carcinogenicity and harmfulness. For modern people who spend a lot of time living indoors for more than an hour, the occurrence of these harmful substances can be said to be fatal. In response to these risks, in July 2019, the government reinforced the standards for indoor air quality to protect the public's health by raising the detection standards for fine dust, ultrafine dust, and formaldehyde in indoor multi-use facilities. People use machines such as air purifiers to improve indoor air quality, or make efforts such as periodic ventilation. In order to reduce or support these other ancillary efforts more effectively, to reduce the generation of pollutants in the building itself, or to adsorb or purify pollutants in the air, use carbon black as an admixture to make a cement hardened body, and to grasp basic physical properties and adsorption capacity. And the result is as follows. As a result of the experiment to determine the appropriate amount of carbon black, it was confirmed that the more the amount of carbon black was added, the better it was in the formaldehyde emission test, but the tendency was not clear when measuring the flexural strength, so a further experiment to improve this is needed.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.134-140
• /
• 2023

활성탄은 주로 기체나 액체상의 흡착제로 사용되는 탄소질 재료이다. 휘발성 유기화합물의 흡착열 축적 및 산화 등에 의해 화재가 꾸준히 발생함에 따라 석탄과 야자껍질을 원료로 하는 분말 및 입상활성탄을 대상으로 폭발특성 및 열안정성을 평가하였다. 입도분석을 통해 분말활성탄은 입도범위 (0.4~3) ㎛를 가지는 것을 확인하였으며, 시차주사열량계와 열중량분석기를 사용하여 발열개시온도 및 분해거동 등의 열적 특성을 분석하였다. 부유분진에 대한 폭발위험성을 평가한 결과, 석탄계 및 야자계 분말활성탄 모두 St1 등급으로 폭발에 의한 위험성이 약한 분진으로 분류되지만 이는 상대적인 크기를 나타내는 것으로 폭발에 의한 위험성이 절대적으로 작음을 의미하는 것이 아니므로 피해저감을 위한 대책을 수립할 필요가 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.232-233
• /
• 2018

Among the recent environmental pollution, indoor air pollution has an adverse effect on the health of indoor residents. Radon, one of the causes of indoor air pollution, is released from concrete, gypsum board and asbestos slate among building materials. Radon is a primary carcinogen and is a colorless, tasteless, odorless inert gas that adheres to airborne dust and enters the body through breathing. At this time, there is a risk of developing cancer if the alpha rays from the lononggas entering the human body destroys the lung tissue and is continuously exposed to a high concentration of lonon gas. The World Health Organization (WHO) has emphasized the reduction of radon and its exposure to radon by classifying it as a first-level carcinogen, but many people have not recognized it yet, and the research is underdeveloped. Therefore, this study was carried out to investigate the properties of adsorbed coconut radon to prevent the inflow of radon gas, which is an air pollution source of indoor air, and to prevent inflow into the human body.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.120-121
• /
• 2018

Radon is one of the substances that pollute the indoor air and is classified as a first-level carcinogen by the International Agency for Research on Cancer(IARC) together with asbestos, and it is reported that it can cause lung cancer. The World Health Organization(WHO) reports that lung cancer is the second leading cause of lung cancer, and 6-15% of lung cancer patients report lung cancer caused by radon. Radon occurs in cracks in concrete and aged buildings, and is detected in soil, rocks, groundwater, and so on. It is a colorless, odorless and tasteless gas which is adsorbed to dust in the air and enters through human respiratory system. This study used vermiculite (expanded vermiculite), which has excellent ion exchange ability and a large number of pores, and industrial by - product red mud which has heavy metal adsorption ability, in order to adsorb radon. A matrix capable of adsorbing radon was prepared, and the characteristics of each material were compared and analyzed.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.209-214
• /
• 2021

As coffee consumption per person increases annually to 323 cups in 2018, treating the spent coffee ground has arisen because spent coffee ground results in soil and air pollution. The demands of air purification filters are increasing more and more because the air pollution due to the fine dust has become worse. The spent coffee grounds had a porous structure, however, the pore was blocked by organic oil compounds. Electrocoagulation, which is one of the electrochemical methods, has the potential to remove the organic compounds. The surface area of spent coffee grounds increased effectively after the electrocoagulation treatment, and surface morphology and surface area were confirmed using SEM and BET, respectively. Using the FT-IR, both the spent coffee grounds and the electrocoagulated spent coffee grounds were characterized. The filter characteristics were examined by the adsorption test using formaldehyde, one of the air pollutants.