• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.39-43
• /
• 1997

Posturography stands or quantitative assessment of body postural stability analysis. The present study developed a balance plate system to monitor patient's center of pressure (COP) movement and to analyze its stability. An equilateral triangular shaped plate was made of duralumin and forces were measured on the three vertices of the plate using industrial load cells. Specially designed electronic circuit picked up force signals ed into data acquisition system to calculate the cartesian coordinates of COP. COP calculation error was less than 2%. The force signals enabled to compute stability measures, which consisted of a variety of clinical parameters related to postural stability. Clinical experiments were carefully designed and performed on 40 normal subjects. The results were that 1) postural stability decreased with age and 2) the best parameters were those of posture deviation measures. A customized PC-based software package was developed to apply the present technique with a great convenience to monitoring and analyzing postural stability in an accurate and quantitative way.

• 대한전자공학회논문지TC
• /
• 제44권1호
• /
• pp.18-23
• /
• 2007

본 연구에서는 DTV 전파환경 및 수신환경 측정용 기준 안테나를 LPDA 안테나를 이용하여 개발하였다. 안테나의 재질은 측정 장치 구성 및 해체 시의 기구적 견고성을 확보하고 가벼운 시스템 구성이 가능하도록 Element 및 본체를 두랄루민으로 제작하였으며, 동작 주파수 $450\;{\sim}\;850$ MHz에서 안테나 이득은 FCC 규정치인 10 dBd 이상이 되도록 설계하였다. 개발된 안테나는 전 대역에서 10 dBd 이상 (평균 11.7dBd)의 이득 특성과 ${\pm}1.5$ dB의 우수한 통과특성을 지녀 수신환경 측정용 표준안테나로 적합하다.

• 대한후두음성언어의학회지
• /
• 제6권1호
• /
• pp.46-55
• /
• 1995

Authors devised an objective test for nasal resonatory disorders using a vibratory sensor(Piezoelectric receiver) which is relatively cheap. The vibratory sensor was covered with duralumin to eliminate contamination of acoustic sound except a small hole which is attached on ala nasi during the test. Electrical signals front the vibratory sensor and the microphone while the subject is phonating vowel/a/ and nasal consonant /ng/ and phonating 8 syllable sentence /papa/ passage and /mama/ passage were digitized with n 12 bit A/D converter. For the evaluation of the hypernasality, the ratio of /ng/ to /a/ and /mama/ passage to /papa/ passage were used instead of individual values to reduce the observational error. For the evaluation of the hyponasality, the cul-de-sac resonation was induced by obstructing the nasal aperture of the ipsilateral side with the finger. In the normal control group, the ratio of /ng/ to /a/ and /mama/ passage to /papa/ passage was larger than 8. In the hypernasality with nasal emission group. the ratio was decreased markedly(p＜0.01). When the nasal aperture was obstructed with the finger, the vibratory signals of /a/ and /ng/ were increased markedly in the control group and hypernasality group(p＜0.01). However, in the hyponasality group(severe), the increment was minimal. So this system can be used to detect the nasal resonatory disorders objectively and differentiate the hypernasality front hyponasality easily.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.494-496
• /
• 2004

Due to a typhoon named MAEMI on Sep12, 2004, 7 transmission towers collapsed and 3 were damaged in the Gyeongnam and Busan areas. These caused long-term black-outs in Goeje-do. When a transmission tower collapses or is damaged, Construction will take more than 2 months and this will be accompanied by long-term black-outs. Therefore a temporary iron pole is used in such emergencies. Current temporary rehabilitation angle steel iron Pole consistes of around 800 members, 2,800 bolts and it takes about 5 days to construct a temporary transmission line. Consiquently wide black-outs occur during the construction of the temporary transmission line. To reduce black-out time, the construction period must be reduced as much as possible. This paper presents new methods to reduce temporary transmission line construction time to within 48 hours by applying a self-reliance assembling method instead of the current man power assembling method and by modulizing each angle steel with duralumin.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.151-157
• /
• 2018

In this study, we have developed a composite pressure vessel that is compact and can store refrigerant at high pressure to increase the refrigerant volume. The composite pressure vessel is made of aluminum-based duralumin, which has high rigidity and excellent elongation in the inner liner, considering the characteristics of products in the aerospace and defense industry, where the safety of the applied product is considered as a priority. High strength carbon fiber was applied to the outside. In order to evaluate the performance of the developed product, burst test and cycling test were carried out. In burst test, an excellent safety margin equivalent to 2.7 times the operating pressure was obtained. In cycling test, a stable failure mode in which 'pre-burst leak' occurs is proved and the soundness of the product is proved.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.233-240
• /
• 2003

Recently, the world are preparing for new revolution, called as If (Information Technology), NT (Nano-Technology), and BT (Bio-Technology). NT can be applied to various fields such as semiconductor-micro technology. Ultra precision processing is required for NT in the field of mechanical engineering. Recently, together with radical advancement of electronic and photonics industry, necessity of ultra precision processing is on the increase for the manufacture of various kernel parts. Therefore, in this paper, stability of ultra precision cutting unit is investigated, this unit is the kernel unit in ultra precision processing machine. According to alteration of shape and material about hinge, stability investigation is performed. In this paper, hinge shapes of micro stage in UPCU(Ultra Precision Cutting Unit) are designed as two types, where, hinge shapes are composed of round and rectangularity. Elasticity and strength are analyzed about micro stage, according to hinge shapes, by FE analysis. Micro stage in ultra precision processing machine has to keep hinge shape under cutting condition with 3-component force (cutting component, axial component, radial component) and to reduce modification against cutting force. Then we investigated its elasticity and its strength against these conditions. Material of micro stage is generally used to duralumin with small thermal deformation. But, stability of micro stage is investigated, according to elasticity and strength due to various materials, by FE analysis. Where, Used materials are composed of aluminum of low strength and cooper of medium strength and spring steel of high strength. Through this stability investigation, trial and error is reduced in design and manufacture, at the same time, we are accumulated foundation data for unit control.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.411-420
• /
• 2000

The energy storage systems are being widely researched for the high quality of the electric power. The FES(flywheel energy system) is especially, on the center of the research because it does not make any pollution and its life is long. The FES converts the electrical energy into the mechanical kinetic energy of the flywheel and reconverts the mechanical energy into the electrical energy. In order to store as much energy as possible, the flywheel is supposed to be rotated with very high speed. The motor/generator of the FES should be high efficient at high speed, and generate constant torque with respect to the rotation. In this paper, a motor/generator employing a Halbach array of permanent magnets is designed and constructed to meet the requirements, and its characteristics are examined. The magnetic field is analysed by using the magnetic surface charge method. The armature winding is designed for the harmonic components to be minimized by using the FFT. The sinusoidal current for the motor driving are generated by the hysteresis current controller. A sample superconducting flywheel energy storage system is constructed with a duralumin flywheel which has a maximum rotating speed of 40,000[rpm] and a stored energy of 240[Wh] and its validity is examined through the experiment.

• 한국실내디자인학회논문집
• /
• 제17권2호
• /
• pp.13-21
• /
• 2008

The purpose of this study is to analyze the development and characteristics of movable-housing planning concept. A document research method was used to analyze and classified the development of the movable-housing concept of 20th century. Through this study, the following conclusions have been reached; First, the origin of the movable-housing is from the prehistoric and traditional portable buildings, also due to the emergence of nomadic lifestyle using car traveling and mobile home in the 1920's. Second, the development of the movable-housing in 20th century was classified as follows; (1) In order to obtain the productivity and efficiency drawing from the industrialized-housing in the early of 1900s, movable furniture and flexibility was proposed. (2) American mobile home in 1920's, influenced by the development of car industry, was the most successful example of a factory-built building to be found in the world. (3) Dymaxion house and dome by R.B.Fuller, an aggregation of high-tech mechanical equipment, had a great impact on the development the concept of 'mobility' and influenced Archigram & Metabolist's movable capsule ideas in 1960's. (4) The lightweight materials such as plastic, duralumin and pneumatic structure were adopted for movable-housing in 1960's. Through this research, It is discovered that the stage of social development has close links with the developing aspects of movable-housing concepts. This study shows that the combination of three planning concepts such as flexible housing, mobile-housing and capsule will be more ideal in movable-housing planning rather than relying on just one type.

• 해양환경안전학회지
• /
• 제22권5호
• /
• pp.583-592
• /
• 2016

해상에서는 UN산하 IMO(International Maritime Organization, 국제해사기구)는 선박에서 배출하는 $CO_2$량을 2030년까지 30 %까지 줄이는 것을 목표로 설정하고 있다. 본 연구는 이러한 상황에 대응하고 친환경기술의 개발을 목표로 선박용 내연기관에서의 폐열을 이용하는 열전발전시스템 개발에 최종목표를 두고, 본 논문에서는 선박용 열전발전시스템 개발에 앞서 기초 열해석을 실시하고 분석하였다. 그 결과 다음과 같은 열전발전시스템의 효율향상에 관한 유효한 방법을 얻어 낼 수 있었다. 1) 고온측 열원과 모듈간 온도차를 줄여 모듈의 온도차를 늘리는 것으로 열전발전시스템의 효율이 8.917 %로 향상되는 것을 알 수 있었다. 2) 외부부하저항의 변화에 따른 시스템 효율은 약 6 %로 그 변화폭이 크게 발생하지 않는 것을 확인할 수 있었다. 3) 동일 계산 조건에서 방형관의 재질이 스테인레스인 경우의 시스템 효율이 8.707 %로 두랄루민(8.605 %), 동(8.607 %)보다 높을 것을 확인할 수 있었다.

• 한국의학물리학회지:의학물리
• /
• 제13권1호
• /
• pp.9-14
• /
• 2002

두부 프레임을 지지하는 방식으로 pedestal mounting system과 couch mounting system의 장점을 수용한, 새로운 형태의 분할 정위방사선 치료 시스템을 개발하였다. 두부 고정을 위한 프레임은 두랄루민으로 제작하였고, 카우치에 부착되게 하였다. 프레임 내에서 환자의 두부를 고정하기 위해 치아 고정장치와 3.2 mm 열프라스틱으로 전두부와 후두부에 마스크를 제작할 수 있다. 정위 좌표 구현을 위한 전산화 단층촬영 localizer는 각 병원에서 많이 사용하고 있는 Brown-Roberts-Walls(B.R.W) 시스템을 사용할 수 있게 하여, 개발된 시스템의 신뢰성을 높이고 제작 단가도 낮추고자 하였다. 프레임 mounting system은 pedestal mounting system을 수정, 보완한 형태로 개발하였다. 시스템은 카우치를 지지하는 바닥 면에 고정되어 카우치에 부착된 프레임과 결합할 수 있고, 시스템과 카우치의 잠금 장치를 푼 채 자유롭게 x, y축으로 유동할 수 있다. 프레임 mounting system의 중심축은 상, 하 방향으로 이동 가능한 포인터 형태로 제작하여, 치료기의 구동 정확성을 검증하는 정도 관리에 응용 가능하다. 개발된 시스템의 재현성과 정확도 검증을 위해 아크릴 팬텀과 포인터를 제작하였고, 전산화 단층촬영 영상에서 획득한 팬텀 내 목표점의 정위 좌표를 dial-gauge와 E.C.L 필름으로 검증하였다. 실험의 결과 x축 방향의 재현성 오차는 0.71$\pm$0.19 mm, y축 방향은 0.45$\pm$0.15 mm, z축 방향 재현성 오차는 0.63$\pm$0.18 mm로 나타났고, 최대 1.3 mm 이내의 우수한 재현성을 보였다. 연구 결과로 개발된 분할 정위방사선 치료 시스템은 재현성이 우수하고, 전체 중량이 가벼워 사용하기 쉽게 제작되었다. 특히 수정된 pedestal frame mounting system으로 설계되어 후두부 방사선 조사가 가능한 장점이 있다.