• 드라이브 ㆍ 컨트롤
• /
• 제19권3호
• /
• pp.32-38
• /
• 2022

The in-wheel drive gearbox for military special vehicles converts the high-speed & low-torque output generated by the electric servomotor, into low-speed & high-torque mechanical power. As the vehicle is remotely maneuvered in mountainous terrain, wet fields, rough terrain, etc., the gearbox must generate a maximum input speed exceeding 5,000 rpm, a maximum torque of 245 Nm, and MTBF of 9,600 km. The purpose of this study was to analyze the failure mode of the gearbox, to ensure the durability of the in-wheel drive gearbox. Also, the field load test data of the vehicle was analyzed, the acceleration durability test standards were established, the acceleration durability test was conducted, and the durability test results were analyzed as well.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.273-279
• /
• 2017

Purpose: Recently, Issues on security for vehicles are getting increased all around the world. Especially, hood panel needs to be thinner for the protection of pedestrians. But thinner panel makes durability get worse. So, it is needed to satisfy both of them. Methods: Durability effectiveness will be studied because properties and assembly allowance of over-slam bumper mostly affects durability of hood panel. Overlap of over-slam bumper can be made in production line and it can affect durability of spot welding in hood inner panel. Daguchi method is used to catch the condition in which load gets smaller and location, hardness and quantity of overlap are selected to be factors. Durability effectiveness is analyzed with the factors. Result: the mechanism that affects on spot welding is identified. The test was conducted in both open/close and driving condition and the relation between both conditions is analyzed. Conclusion: The test contributed to durability of hood panel with optimization of over-slam bumper.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.28-34
• /
• 2007

In design stage of vehicles, the application of virtual durability analysis techniques enables us to cut down the necessary time and cost to carry out various physical experiments. In this study, computer simulations of vehicle suspensions were carried out with DADS program including component flexibility, and the durability analysis of vehicle components was executed with MSC/Fatigue program using the load history obtained from vehicle dynamic simulation. Driving test of a vehicle was also carried out to obtain precise input data for the durability analysis, and the results of virtual durability analysis were compared to those of experiments.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권1호
• /
• pp.7-14
• /
• 2016

Purpose: The purpose of this study is to development the fire evaluating test methods for the Electric hair dryers. Methods: We was designed FMEA (Failure mode and effects analysis) in order to analyze the fire mechanism on the electric hair dryers and designed evaluating test methods (Durability tests on the environment, Mechanical durability tests) obtained through the two-step QFD (Quality Function Depolyment) and tested. Conclusion: We verified the evaluating fire test methods on the electric hair dryers through the analysis of the test results and some reproduction test.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.537-546
• /
• 2021

Remanufacturing is one of the most important resource recycling technology in response to resource depletion and environmental pollution. Domestic remanufacturing industry don't invigorate compared to other advanced countries because of low price and reliability of remanufactured product. In this study, remanufactured hydraulic pump and solenoid valve were evaluated durability by accelerated life test. In order that standard remanufacturing process was developed by core analysis and failure mode and effect analysis. And cores were remanufactured by standard remanufacturing process. For accelerated life test, the evaluation item and criteria were deduced by results of FMEA, reliability standards and enterprise interior criteria. To evaluate durability of remanufactured product, the remanufactured hydraulic pump and solenoid valve were evaluated performance after accelerated life test and the results were satisfied with criteria. This study showed that remanufactured products have a similar level of durability to new products by definition of remanufacturing.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.128-135
• /
• 2022

In the product development process, the reliability of the product can be secured through durability tests. However, since the durability test method is expensive and time consuming, a method to save time and money by utilizing virtual product development (VPD) is required. However, research on the accuracy of the results of virtual product development is required. In this paper, an accelerated durability test was designed and conducted using a planetary gear decelerator. And an analysis model under the same conditions was created and simulated. To correlate the results of the experiment with the results of the analytical model, created a model that can discriminate the wear region using one of the data mining methods, the k-means algorithm method and HSV (Hue, Saturation, Value). The wear area is compared by counting the number of pixels defined as wear through a discrimination model. A similar ratio was calculated by comparing the pixel ratio of the area determined as wear in the entire area. It showed a similar ratio of about 70%, and it is necessary to improve the discrimination method.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.127-133
• /
• 2002

항공기 구조 개발에 관련된 MIL-STD-1530A에는 구조 건전성을 확보하기 위한 요구사항이 기술되어 있다. 기체 구조의 내구성 및 손상허용성은 요구사항 중의 하나로서 관련 규격서의 요구조건과 절차에 따라 해석 및 시험을 통하여 입증되어야 한다. 본 논문에서는 기본 훈련기의 안전성 및 내구성 평가를 위한 실기체 내구성시험에 대하여 소개하였다. 내구성시험은 미군사규격서의 요구조건 및 절차에 따라 수행되었다. 내구성시험의 시험하중은 비행대비행 하중 스펙트럼으로 기본 훈련기의 피로하중 기준에 의거하여 개발되었다. 4배 설계수명 동안의 내구성시험을 성공적으로 완료하였으며, 기본훈련기 구조가 내구성 요구조건을 만족하고 있음을 확인하였다.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.16-20
• /
• 2010

This study proposes a structural design method for the upper control arm installed at the rear side of a SUV. The weight of control arm can be reduced by applying the design. In this research, the former includes optimization technology, and the latter the technologies for selecting aluminum as a steel-substitute material. Strength assessment is the most important design criterion in the structural design of a control arm. At the proto design stage of a new control arm, FE (finite element) analysis is often utilized to predict its strength. In this study, the kriging interpolation method is adopted to obtain the minimum weight satisfying the strength constraint and durability criteria. The optimum results determined from the in-house program are compared with those of ANSYS WORKBENCH. The durability assessment is obtained by a index of fatigue durability and trial & error method, MSC. Fatigue program.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3889-3894
• /
• 2012

국내 여객을 취급하는 철도역사의 승강장은 간선철도노선의 저상승강장(500mm)과 광역전철구간의 고상승강장(1135mm)으로 구분 운용되고 있다. 저상승강장 전용 중 고속 열차가 수도권 전철구간(고상승강장)과 본선구간(저상승강장)에서 혼용 운영될 경우를 대비하고 안전운전 및 승객편의를 함께 고려하기 위해 저상 고상 승강장 겸용 승강시스템의 개발은 필수적이다. 한편 현재 개발 중인 시스템(스텝)에 대한 국내의 내구성 및 신뢰성 시험 기준은 존재하지 않는다. 따라서 본 연구에서는 저상/고상 승강장 겸용 텔레스코픽 슬라이드방식 승강문 스텝의 개발을 위한 연구 일환으로서, VPD관점에서 내구성 해석을 수행하고 신뢰성 보증시험에 준한 무고장 시험시간동안 실물 리그시험을 통하여 이의 내구성 기준 및 보증수명을 검토하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.40-48
• /
• 2018

Purpose: This research is to develop Trailer Durability Test of towing device, in order to cover usage conditions of bike type as well as general type trailer. With the diversification of leisure activities, the population that enjoys various sports and leisure has increased rapidly, and the number of vehicles equipped with camping trailers and bike carriers is also increasing steadily. The purpose of this study is to develop a durable vehicle that has no problem in various customer conditions. Methods: We measured the input load under various conditions of the user by attaching load cell to the body fixing part and towing ball of the towing device. The load in various modes was measured, and the difference between the trailer and the bike carrier type was compared and analyzed. Results: Due to the difference in fixing method and weight between the two types, the trailer has a large longitudinal force and the bike type has a large vertical force. Therefore, it is necessary to durability test method capable of satisfying all longitudinal force and vertical force. Conclusion: We improved the durability test of the towing device by changing the test surface. The new mode has made it possible to shorten the durability test schedule by increasing test efficiency.