• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.628-631
• /
• 2014

Recently, the proliferation of new applications, e.g., mobile TV, Internet gaming, large file transfer, and the various of user terminals, e.g., smart phones and notebooks, has dramatically increased user traffic and network load. In order to meet this traffic growth, vendors and cellular operators are working on the development of new technologies and cellular standards. Within them, small cell deployment has been heralded as one of most promising way to increase both coverage and capacity of future cellular network. Small cell technology enables to improve capacity of cellular radio network by tight cooperation between small cell and macro cell in multi-tier network where small cells are densely deployed within macro cell coverage. In this paper, we describe the deployment scenarios for cooperation between macro cell and small cells and state-of-the-art technologies related to dense small cell deployment. Then, we also provide design principles and standardization trends for small cell enhancement in 3GPP.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.800-804
• /
• 2019

This paper presents a dual-loop sub-sampling digital PLL for a 2.4 GHz IoT applications. The PLL initially performs a divider-based coarse lock and switches to a divider-less fine sub-sampling lock. It achieves a low in-band phase noise performance by enabling the use of a high resolution time-to-digital converter (TDC) and a digital-to-time converter (DTC) in a selected timing range. To remove the difference between the phase offsets of the coarse and fine loops, a phase offset calibration scheme is proposed. The phase offset of the fine loop is estimated during the coarse lock and reflected in the coarse lock process, resulting in a smooth transition to the fine lock with a stable fast settling. The proposed digital PLL is designed by SystemVerilog modeling and Verilog-HDL and fully verified with simulations.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1061-1067
• /
• 2019

In this paper, a highly integrated 3-channel DC-DC converter is designed using power transistor width scaling (PTWS). For positive voltage, $V_{POS}$, a boost converter is designed using the set-time variable pulse width modultaion (SPWM) dual-mode and PTWS to improve efficiency at light load. For negative voltage, $V_{NEG}$, a 0.5 x regulated inverting charge pump is designed with pulse skipping modulation (PSM) controller to reduce power consumption, and for an additional positive voltage, $V_{AVDD}$, a LDO circuit is designed. The proposed DC-DC converter has been designed using a $0.18{\mu}m$ BCDMOS process. Simulation results show that the proposed converter has power efficiency of 56%~90% for load current range of 1 mA~70 mA and output ripple voltage less than 5 mV at positive voltage.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.120-127
• /
• 2019

PURPOSE. To determine wear amount of single molar crowns, made from four different restoratives, and opposing natural teeth through computerized fabrication techniques using 3D image alignment. MATERIALS AND METHODS. A total of 24 single crowns (N = 24 patients, age range: 18 - 50) were made from lithium disilicate (IPS E-max CAD), lithium silicate and zirconia based (Vita Suprinity CAD), resin matrix ceramic material (Cerasmart, GC), and dual matrix (Vita Enamic CAD) blocks. After digital impressions (Cerec 3D Bluecam, DentsplySirona), the crowns were designed and manufactured (Cerec 3, DentsplySirona). A dualcuring resin cement was used for cementation (Variolink Esthetic DC, Ivoclar). Then, measurement and recording of crowns and the opposing enamel surfaces with the intraoral scanner were made as well as at the third and sixth month follow-ups. All measurements were superimposed with a software (David-Laserscanner, V3.10.4). Volume loss due to wear was calculated from baseline to follow-up periods with Siemens Unigraphics NX 10 software. Statistical analysis was accomplished by Repeated Measures for ANOVA (SPSS 21) at = .05 significance level. RESULTS. After 6 months, insignificant differences of the glass matrix and resin matrix materials for restoration/enamel wear were observed (P>.05). While there were no significant differences between the glass matrix groups (P>.05), significant differences between the resin matrix group materials (P<.05) were obtained. Although Cerasmart and Enamic were both resin matrix based, they exhibited different wear characteristics. CONCLUSION. Glass matrix materials showed less wear both on their own and opposing enamel surfaces than resin matrix ceramic materials.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.430-436
• /
• 2019

It is needed to develop an antenna with features of subminiature, light weight and multi-band operation for the variaty services in maritime and industrial fields. The PCB pattern antenna is one of the appropreiate antennas solving these requirements. In this research, the design and fabrication of the PCB pattern antenna operating on the single band of 920 MHz are investigated. The final goal is that the development of the dual band PCB pattern antenna operating on 260 MHz and 920 MHz, which is based on the proposed antenna. It is evident that the performance in the frequencies of 902 MHz, 915 MHz and 928 MHz among of 920 MHz ISM band is better than that in other frequencies. It is also confirmed that the differences of the voltage standing wave ratio, return loss, gain and efficiency between three frequencies are less than 5%. It is expected that the development of communication link of 5-10 km is possible when the induced results are applied into the low power wide area (LPWA) network desinged by the rule of -30 dB sensitivity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.429-429
• /
• 2015

면적감소계수(ARF)는 면적강우에 대한 지점강우의 비로 정의되며, 과거 면적확률강우량 산정시 유역 내의 여러 지점강우량을 티센기법, Kriging 기법 등을 통해 공간보정을 실시하고 면적강우량을 산정하였다. 하지만 이러한 방법은 강우의 시공간분포 특성을 정확히 반영하지 못하는 단점이 있기 때문에, 최근에는 많은 연구에서 레이더 강우를 활용한 ARF를 산정한다. 기존의 연구에서 이중편파레이더를 사용하여 낙동강 유역의 호우중심형 ARF를 산정한 바 있기 때문에, 본 연구에서는 산정된 ARF 값을 적용한 설계홍수량은 분석해보고자 한다. 대상유역은 낙동강 유역내의 유역들을 대상으로 하고자 한다. 낙동강 유역에는 약 $175km^2{\sim}2000km^2$의 다양한 면적의 유역들이 존재함을 확인하였다. 따라서 면적별로 대표적인 유역을 선정하여 설계홍수량을 산정하기에 적합한 지역이라 판단된다. 설계홍수량을 산정하기 방법으로는 강우-유출 모형을 이용하고자 한다. 이용할 모형은 호주에서 개발된 IHACRES 모형으로써, 개념적인 모형으로 장기 및 단기 강우사상을 모두 모의할 수 있는 특징을 갖고 있다. 따라서 낙동강 내의 선정된 유역들을 실제 강우자료를 통해 각 유역의 매개변수를 산정하고, 확률강우량과 Huff분포를 이용한 지속시간 24시간의 설계강우량을 산정하고자 한다. 산정된 설계강우량에 앞서 소개한 이중편파레이더 ARF를 적용하여 설계홍수량을 산정하고, ARF를 적용하지 않고 산정한 설계홍수량, 두 값의 차이를 통해 ARF를 통해 감소된 설계강우량의 비와 ARF 적용 유무에 따른 설계홍수량 차이의 비를 비교하여 이중편파레이더 ARF가 면적별로 미치는 영향을 알아보고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1075-1080
• /
• 2020

The development of computing technology and networking is developing as the fundamental technology of the 4th industrial revolution. AR and VR technologies, which are dual realistic media fields, are developing into many application areas, especially! The potential for development in the medical field is very high. As for the development potential of the health care field, the 4th industrial revolution such as AR/VR to solve problems, such as the increase of various chronic diseases due to the aging of the population, the limitation of infrastructure that can deal with them, and the lack of specialized personnel. It is adopting services in the healthcare field using representative technologies. Accordingly, AR/VR in the healthcare field occupies about 17% of the total industrial market. Therefore, in this study, cognitive judgment technology using AR applies cognitive evaluation through a computing system to the mild cognitive impairment, and based on the results, researches to utilize cognitive rehabilitation contents using augmented reality, and hardware necessary for cognitive judgment technology. Also, software design to help in the field of cognitive judgment technology and healthcare using AR.

• The Research Journal of the Costume Culture
• /
• v.29 no.2
• /
• pp.252-271
• /
• 2021

The purpose of this study is to expand satirical expressions that appear in a wide range of arts into fashion and to analyse and present satirical expressions that appear in contemporary fashion through the collections of Thom Browne. Theoretical examination of satirical concepts were made of domestic and foreign academic theses, dissertations, precious studies, and publications related to satire. Analysis was conducted on cases in which satirical expressions were applied in literature, painting, sculpture, and fashion. Based on these studies, analysis was conducted on satirical expressions appearing in Thom Browne's work. Material was gathered from collection reviews, interview articles, professional books, and internet photo material from professional fashion magazines encompassing 16 years of Thom Browne's collections officially recorded in the international fashion magazine 'Vogue', ranging from the 2006 S/S collection to the 2021 S/S collection. From this, a total of 1,753 photos were collected as data. Characteristics of satirical expression were analyzed and the results were as follows. A fluid reconstruction of 'gender fluid', dual meanings of metaphorical allegories, playful expressions of visual wit, constructions made of overlapped disassembled material, and borrowing of morphological distortion were all identified. Accordingly, satirical approaches as social aspects and objects in the flow of modern thought appear as positive forms based in humor that hope to be improved. This study anticipate the concept of satire will expand into a positive form as a new direction of fashion.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.1-11
• /
• 2021

NC Soft will continue to dream of an entertainment innovation world where customers are connected through game and contents. NC Soft images an expansion in entertainment industry which open doors to the future of enjoy break through innovative online game and creative AI & IT technologies, focused on new business opportunities that are solely NC's own. This study starts with the implication on why focusing on exploration innovation and exploitation strategy at the same time in NC Soft is so challenging. NC Soft manages to their online & mobile gaming competencies in the long term and achieves their sustainable growth by incremental innovation (e.g. game planning, game programming, and graphic design). Also, for innovative success, pursuing exploration strategy is essential. NC Soft have built a strategic alliance spanning K-POP, digital contents platform, movie, and animation, sharing the connectivity of entertainment domains with major contents corporations. The findings of this study would also beneficial to entertainment and contents corporation executives and could provide some road-map on managing the dual challenges of exploration and exploitation implementations.