• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.163-173
• /
• 1998

Nuclear medicine emission computed tomography(ECT) can be very useful to diagnose early stage of neuronal diseases and to measure theraputic results objectively, if we can quantitate energy metabolism, blood flow, biochemical processes, or dopamine receptor and transporter using ECT. However, physical factors including attenuation, scatter, partial volume effect, noise, and reconstruction algorithm make it very difficult to quantitate independent of type of SPECT. In this study, we quantitated the effects of attenuation and scatter using brain SPECT and three-dimensional brain phantom with and without applying their correction methods. Dual energy window method was applied for scatter correction. The photopeak energy window and scatter energy window were set to 140ke${\pm}$10% and 119ke${\pm}$6% and 100% of scatter window data were subtracted from the photopeak window prior to reconstruction. The projection data were reconstructed using Butterworth filter with cutoff frequency of 0.95cycles/cm and order of 10. Attenuation correction was done by Chang's method with attenuation coefficients of 0.12/cm and 0.15/cm for the reconstruction data without scatter correction and with scatter correction, respectively. For quantitation, regions of interest (ROIs) were drawn on the three slices selected at the level of the basal ganglia. Without scatter correction, the ratios of ROI average values between basal ganglia and background with attenuation correction and without attenuation correction were 2.2 and 2.1, respectively. However, the ratios between basal ganglia and background were very similar for with and without attenuation correction. With scatter correction, the ratios of ROI average values between basal ganglia and background with attenuation correction and without attenuation correction were 2.69 and 2.64, respectively. These results indicate that the attenuation correction is necessary for the quantitation. When true ratios between basal ganglia and background were 6.58, 4.68, 1.86, the measured ratios with scatter and attenuation correction were 76%, 80%, 82% of their true ratios, respectively. The approximate 20% underestimation could be partially due to the effect of partial volume and reconstruction algorithm which we have not investigated in this study, and partially due to imperfect scatter and attenuation correction methods that we have applied in consideration of clinical applications.

• Radiation Oncology Journal
• /
• v.13 no.3
• /
• pp.277-283
• /
• 1995

Purpose : This study was performed to measure dose alteration at the air-tissue interface resulting from rebuild-up to the loss of charged particle equilibrium in the tissues around the air-tissue interfaces. Materials and Methods : The 6 and 10-MV photon beam in dual energy linear accelerator were used to measure the surface dose at the air-tissue interface The polystyrene phantom sized $25{\times}25{\times}5\;cm^3$ and a water phantom sized $29{\times}29{\times}48\;cm^3$ which incorporates a parallel-plate ionization chamber in the distal side of air gap were used in this study. The treatment field sizes were $5{\times}5\;cm^2,\;10{\times}10\;cm^2\;and\;20{\times}20\;cm^2$. Air cavity thickness was variable from 10 mm to 50 mm. The observed-expected ratio (OER) was defined as the ratio of dose measured at the distal junction that is air-tissue interface to the dose measured at the same point in a homogeneous phantom. Results : In this experiment, the result of OER was close or slightly over than 1.0 for the large field size but much less (about 0.565) than 1.0 for the small field size in both photon energy. The factors to affect the dose distribution at the air-tissue interface were the field size, the thickness of air cavity. and the photon energy. Conclusion : Thus, the radiation oncologist should take into account dose reduction at the air-tissue interface when planning the head and neck cancer especially pharynx and laryngeal lesions, because the dose can be less nearly $29{\%}$ than predicted value.

• Journal of Environmental Policy
• /
• v.5 no.1
• /
• pp.45-70
• /
• 2006

China has achieved great economic growth above 9% annual since it changed to more of a market economy system by its reform and open-door policy. At the same time, China has experienced severe ecological deterioration, such as air and water pollutions caused by its rapid urbanization and industrialization. China is now confronted with environmental pollution and ecological deterioration at a critical point, at which economic development in China is limited. Moreover, environmental problems in China have become a lit fuse for social fluctuation beyond pollution problems. The root and background of environmental problems in China, firstly, are its government's lack of understanding of these problems and incorrect economic policies affected by political and ideological prejudice. Secondly, the plundering of resources, 'the principle of development first' which didn't consider environmental sustainability is another source of environmental deterioration in China. In addition, a huge population and poverty in China have increased the difficulty in solving its environmental problems, and in fact have accelerated them. The Chinese government has established many environmental laws and institutions, increased environmental investments, and is enlarging the participation of NGOs and the general public in some limited scale to solve its environmental problems. However, it has not obtained effective results because of the lack of environmental investments owing to the government's limit of the development phase, a structural limit of law enforcement and local protectionism, and the limit of political independency in NGOs and the lack of public participation in China. It seems that China remains in the stage of 'economic development first, environmental protection second', contrary to its catch-phrase of 'the harmony between economic development and environmental protection'. China is now confronted with dual pressure both domestically and abroad because of deepening environmental problems. There are growing public's protests and demonstrations in China in response to the spread of damage owing to environmental pollution and ecological deterioration. On the other hand, international society, in particular neighboring countries, regard China as a principal cause of ecological disaster. In the face of this dual pressure, China is presently contemplating a 'recycling economy' that helps sustainable development through the structural reform of industries using too much energy and through more severe law enforcement than now. Therefore, it is desirable to promote regional cooperation more progressively and practically in the direction of building China's ability to solve environmental problems.

• Composites Research
• /
• v.14 no.3
• /
• pp.18-31
• /
• 2001

Interfacial and microfailure properties of the modified steel, carbon and glass fibers/cement composites were investigated using electro-pullout test under tensile and compressive tests with acoustic emission (AE). The hand-sanded steel composite exhibited higher interfacial shear strength (IFSS) than the untreated and even neoalkoxy zirconate (Zr) treated steel fiber composites. This might be due to the enhanced mechanical interlocking, compared to possible hydrogen or covalent bonds. During curing process, the contact resistivity decreased rapidly at the initial stage and then showed a level-off. Comparing to the untreated case, the contact resistivity of either Zr-treated or hand-sanded steel fiber composites increased to the infinity at latter stage. The number of AE signals of hand-sanded steel fiber composite was much more than those of the untreated and Zr-treated cases due to many interlayer failure signals. AE waveforms for pullout and frictional signals of the hand-sanded composite are larger than those of the untreated case. For dual matrix composite (DMC), AE energy and waveform under compressive loading were much higher and larger than those under tensile loading, due to brittle but well-enduring ceramic nature against compressive stress. Vertical multicrack exhibits fur glass fiber composite under tensile test, whereas buckling failure appeared under compressive loading. Electro-micromechanical technique with AE can be used as an efficient nondestructive (NDT) method to evaluate the interfacial and microfailure mechanisms for conductive fibers/brittle and nontransparent cement composites.

• Radiation Oncology Journal
• /
• v.14 no.3
• /
• pp.237-244
• /
• 1996

Purpose : The accurate dosimetry of independent collimator equipped for 6MV and 15MV X-ray beam was investigated to search for the optimal correction factor. Materials and Methods : The field size factors, beam quality and dose distribution were measured by using 6MV, 15MV X-ray Field size factors were measured from $3{\times}3cm^2$ to $35{\times}35cm^2$ by using 0.6cc ion chamber (NE 2571) at Dmax. Beam qualities were measured at different field sizes, off-axis distances and depths. Isodose distributions at different off-axis distance using $10\times10cm^2$ field were also investigated and compared with symmetric field. Result: 1) Relative field size factors was different along lateral distance with maximum changes in $3.1\%$ for 6MV and $5\%$ for 15MV. But the field size factors of asymmetric fields were identical to the modified central-axis values in symmetric field, which corrected by off-axis ratio at Dmax. 2) The HVL and PDD was decreased by increasing off-axis distance. PDD was also decreased by increasing depth For field size more than $5{\times}cm^2$ and depth less than 15cm, PDD of asymmetric field differs from that of symmetric one ($0.5\~2\%$ for 6MV and $0.4\~1.4\%$ for 15MV). 3) The measured isodose curves demonstrate divergence effects and reduced doses adjacent to the edge close to the flattening filter center was also observed. Conclusion . When asymmetric collimator is used, calculation of MU must be corrected with off-axis and PDD with a caution of underdose in central axis.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.4
• /
• pp.207-217
• /
• 2011

In this study the complex formation reactions between uranium(VI) and 2,6-dihydroxybenzoate (DHB) as a model ligand of humic acid were investigated by using UV-Vis spectrophotometry and time-resolved laser-induced fluorescence spectroscopy (TRLFS). The analysis of the spectrophotometric data, i.e., absorbance changes at the characteristic charge-transfer bands of the U(VI)-DHB complex, indicates that both 1:1 and 1:2 (U(VI):DHB) complexes occur as a result of dual equilibria and their distribution varies in a pH-dependent manner. The stepwise stability constants determined (log $K_1$ and log $K_2$) are $12.4{\pm}0.1$ and $11.4{\pm}0.1$. Further, the TRLFS study shows that DHB plays a role as a fluorescence quencher of U(VI) species. The presence of both a dynamic and static quenching process was identified for all U(VI) species examined, i.e., ${UO_2}^{2+}$, $(UO_2)_2{(OH)_2}^{2+}$, and $(UO_2)_3{(OH)_5}^+$. The fluorescence intensity and lifetimes of each species were measured from the time-resolved spectra at various ligand concentrations, and then analyzed based on Stern-Volmer equations. The static quenching constants (log $K_s$) obtained are $4.2{\pm}0.1$, $4.3{\pm}0.1$, and $4.34{\pm}0.08$ for ${UO_2}^{2+}$, $(UO_2)_2{(OH)_2}^{2+}$, and $(UO_2)_3{(OH)_5}^+$, respectively. The results of Stern-Volmer analysis suggest that both mono- and bi-dentate U(VI)-DHB complexes serve as groundstate complexes inducing static quenching.

• Journal of Yeungnam Medical Science
• /
• v.20 no.1
• /
• pp.53-61
• /
• 2003

Background: Body weight is an important factor that influence the bone density in postmenopausal women except estrogen dificiency. However, different results are reported about the relationship between body composition and bone density in the postmenopausal women. We have studied the relationship between age, body weight, body mass index (BMI), waist hip ratio (WHR), muscle mass, fat mass, fat free mass and bone density. Materials and Methods: We have studied 127 persons of postmenopausal women who visited university medical center and examined the inbody 3.0 and Dual Energy X-ray Absorptiometry (DEXA) from Jan, 2001 to Jun, 2002. they didn't have any disease and didn't received hormone therapy, osteoporosis therapy or other medication that influence the bone density. Results: The numbers of study subjects is total 127 persons. Mean age is $56.9{\pm}5.14$, mean weight is $59.3{\pm}8.7kg$, mean BMI is $25.37{\pm}3.16(kg/m^2)$, mean fat mass is $20.02{\pm}5.05kg$, mean muscle mass is $37.49{\pm}4.50kg$, mean fat free mass is $39.80{\pm}4.70$, mean BMD is $0.828{\pm}0.148(g/cm^2$). In the result of linear regression analysis, age, height, weight, muscle mass, fat free mass, fat mass, BMI are significant determinants of BMD. In stepwise multiple regression analysis, age is the most significant determinant of BMD and besides age, fat free mass is the most significant determinant of BMD among body composition. Conclusion: In postmenopausal women, age, height, weight, BMI, muscle mass, fat free mass, fat mass are significant determinants of BMD and besides age, fat free mass is the most significant determinant of BMD among the body composition. So, diet and exercise that increase fat free mass will contribute to bone density increment.

• Korean Journal of Clinical Pharmacy
• /
• v.30 no.1
• /
• pp.51-58
• /
• 2020

Background: Prevention of osteoporosis and bone fracture is one of the important issues for liver transplant recipients because a long history of liver disease and lifelong use of immunosuppressants, including corticosteroids, may cause these diseases. In this study, we aimed to analyze liver recipient bone status, 10-year fracture risk, and medication history. Methods: The electronic medical records of adult patients aged >40 years who received liver transplantation at Seoul National University Bundang Hospital between January 2009 and June 2017 were reviewed retrospectively. On the basis of their bone mineral density and fracture history, their fracture risks were analyzed using the Korean fracture risk assessment tool. Results: A total of 57 liver transplant recipients were treated with corticosteroids during a mean of 8.8 months after transplantation. 30 patients (52.6%) showed bone metabolism dysfunction such as osteopenia or osteoporosis. The 10-year femoral fracture risk was 2.1%, and dual-energy X-ray absorptiometry monitoring was performed, including right before liver transplantation every 27.5±19.2 months. The mean femoral bone mineral density decreased by -7.2%±7.3%. Four patients (7.0%) had a fracture after liver transplantation. Osteoporotic fracture occurred in 3 patients with osteoporosis (25.0%). Among the osteopenia patients with moderate fracture risk who were not treated with bisphosphonate, 1 patient (12.5%) had a history of bone fracture after liver transplantation. Conclusions: Considering the deterioration of bone density and moderate fracture risk, medication for osteoporosis should be prescribed to liver transplant recipients with regular monitoring of bone density after transplantation.

• Journal of Acupuncture Research
• /
• v.26 no.2
• /
• pp.91-101
• /
• 2009

Objectives: Osteoporosis is the most common metabolic disease of the bone, and is one of the most important major public health problems world wide. It is more occurred in female than male, but as the osteoporosis of men is increasing, therefore bone fractures of men are increasing. So we investigated the factors which are related to Bone Mineral Density(BMD) of male for prevention of osteoporosis. Methods: We measured the Bone Mineral Density(BMD) of lumbar spine($L_2$-$L_4$) and femoral neck in 5198 male, using dual energy X-ray absorptionmetry(DEXA; DPX-alpha). And then we analysed the 8 factors - age group, bone mass index(BMI), amount of smoking, drinking, exercise, and fast blood sugar, gastric disease, thyroid disease - which are related to BMD of male. Results: 1. In age group according to ${\ll}$Hwangjaenaekyong Somun, 黃帝內徑 素問${\gg}$, T-score was the highest at 17-24(三八歲) years group and decreased rapidly after 57-64(八八歲) years group in both lumbar spine($L_2$-$L_4$) and femoral neck. Therefore we concluded that T-score of male in lumbar spine($L_2$-$L_4$) and femoral neck change according to age group in ${\ll}$Hwangjaenaekyong Somun, 黃帝內徑 素問${\gg}$. 2. In BMI(body mass index), T-score of lumbar spine($L_2$-$L_4$) and femoral neck were the highest in obese group than non-obese group. In comparison of age group according to BMI, T-score of lumbar spine($L_2$-$L_4$) was significant difference in 17-72 years group and T-score of femoral neck was in 25-72 years group. 3. In exercise, T-score of lumbar spine($L_2$-$L_4$) and femoral neck was increasing as exercising more. In comparison of age group according to exercise, Both T -score of lumbar spine and femoral neck were significant difference in 25-72 years old. 4. T-score of lumbar spine($L_2$-$L_4$) was the highest in men who have taken exercise daily, and T-score of femoral neck was the highest in men who have taken exercise 1-3 times for a week. Conclusions : The age group in ${\ll}$Hwangjaenaekyong Somun, 黃帝內徑 素問${\gg}$ is related to BMD of men. And risk factors - BMI, exercise - are related to BMD of men. Therefore we expect that this study will help for prevention of osteoporosis of men.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2001

Objectives : To compare jaw bone density of young adults (control group) and post-menopausal women(experimental group) in periapical and panoramic film. Materials and Methods : The bone mineral density values of lumbar and femur were measured by dual-energy X-ray absorptiometry(DEXA) and T scores of lumbar were obtained. T scores were classified into 3 group (T<-2.5, $-2.5{\leqq}T<-1$, $-1{\leqq}T$). Radiographic densities of alveolar bones were measured from interdental bones of premolar, molar areas in the maxilla and mandible and expressed into copper step wedge thickness by Scion $Image^{(R)}$ program. We considered these values of step wedge thickness as bone density of alveolar bone. Panorama mandibular index(PMI) was calculated by the method that the height of the inferior cortex of the mandible was divided by the height from the lower border of the mandible to the superior edge of the mental foramen. Bone density of alveolar bone and PMI were analysed statistically. Results : There were significant differences in bone mineral density of lumbar and femoral neck between control and experimental groups. There were also significant differences in bone density of premolar and molar area of jaw between control and experimental groups by MANOVA test. When considered lumbar T variables, there was only difference in interdental bone density of maxillary molar area between control and experimental group, but there was interaction. Interdental bone density of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. There was significant difference in PMI between control and experimental groups, but there was also inter action, thus, PMI of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. Conclusion : There were significant differences of alveolar density and cortical bone thickness between young men and post-menopausal women in periapical and panoramic film. These differences were dependent on lumbar T.