• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.342-342
• /
• 2010

This paper mainly focuses and describes four-armed dual-band rectangular type patch antenna using teflon of 0.54 mm thickness substrate for the application in personal wireless communications at about 2 GHz and 2.5 GHz frequency ranges. The dual-band patch antenna is obtained by embedding one centered and two pairs of rectangular patches on single body above the substrate. Details of the proposed antenna design are presented and discussed as a novel design with remarkable value of return loss (S11) of -28.68 dB and it is the most suitable for WiMAX applications as well.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.230-233
• /
• 2003

In this paper, the wideband microstrip patch antennas for the Personal communications Service $(PCS\;:\;1750\~1870\;MHz)$ and International Mobile Telecommunications-2000 $(IMT-2000\;:\;1920\~2170\;MHz)$ dual band are studied. Experimental and simulation results on the dual band antenna are presented. Simulation results are in good agreement with measurements. The experimental and simulation results confirm the wideband characteristics of the antenna. The studied antenna satisfied the wideband characteristics that are required characteristics for above 420 MHz impedance bandwidth for the PCS and IMT-2000 dual band antenna. In this paper, through the designing of a dual band antenna, we have presented the availability for PCS & IMT-2000 base station antenna. An impedance bandwidth of $31\%(VSWR<1.5,\;615\;MHz)$ and a maximum gain of 7dBi can be achieved. The radiation pattern is stable across the passband.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.197-201
• /
• 2017

In this paper, we present a novel design for a dual-band bandpass filter (BPF) based on the conventional second-order, open-loop BPF. By adding series resonant circuits to the open ends of the resonator, we can create two resonant modes from the even and odd modes. One pair of the even and odd modes constitutes the upper passband, while the other pair constitutes the lower passband. By adding another series resonant circuit to the open-loop resonator, we can control the bandwidth of either the upper passband or the lower passband. We can replace the series resonant circuits with simple microstrip line resonators. A dual-band BPF working at both Wi-Fi bands (2.4 GHz and 5.8 GHz bands) is designed based on the proposed method and is tested. The measured and simulated results show excellent agreement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.219-220
• /
• 2006

In this paper, we designed and implemented the Dual Band Dipole Antenna with Tapered Microstrip Balun for WLAN Access Point. Two dipole antennas with different resonant frequency and the antenna structure combined additional line were implemented for dual band performance. In order to feed the balun current, the tapered microstrip balun was used. Produced the Dual Band Antenna shows a special quality. The quality is that all VSWR is less than 1.5 in the 2.4GHz and 5GHz frequency bands in 802.11 standards, and it profits not less than 1.7dBi having typical Dipole Antenna pattern the very "a form of 8"pattern and Omni-directional pattern.

• 대한전자공학회논문지TC
• /
• 제44권7호통권361호
• /
• pp.23-28
• /
• 2007

본 논문에서는 무선 랜용 이중대역 GaAs FET 저잡음 증폭기를 설계하기 위하여 인덕턴스 소스 피드백을 이용하고 입력 단에는 이중대역 LC 공진회로를 이용하였으며, 출력단에는 Cheyshev 필터의 임피던스 변환 회로를 이용하였다. 이중대역 증폭기의 입출력정합회로 설계에 필요한 기법 및 수식들을 유도하였으며 설계된 증폭기를 제작하여 측정한 결과 시뮬레이션 결과와 유사한 측정치를 얻을 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.186-191
• /
• 2011

This paper presents a simple and effective method for improving stopband rejection characteristics of previously studied dual-band filters. Small electric couplings were applied to the symmetrically positioned shunt resonators, which divided each transmission zero into two transmission zeros without any effect on passbands. We were able to achieve improved stopband rejection characteristics by these additional transmission zeros. For the filter application, we designed a dual-band filter with improved stopband characteristics using microstrip quasi-lumped elements. The electric couplings that control the location of transmission zeros are controlled by the distance between symmetric open stubs of the filter. The filter was fabricated with a relative dielectric constant of 3.5 and a thickness of 0.76 mm. The fabricated filter has a small size ($14.6{\times}13.2{\times}0.76$ mm) and a low insertion loss when compared with conventional filters.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.433-436
• /
• 2008

In this paper, a novel compact broadband dual frequency microstrip antenna is presented. The meander type patch has been designed to have dual resonant frequencies, and the ground with slot was employed to expand the bandwidth in WCDMA band. The simulated results were obtained using HFSS, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. As a result, measured maximum gain of antenna is 2.07$\sim$2.87 dBi in the GSM band and 3.91$\sim$5.61 dBi in the WCDMA band.

• ETRI Journal
• /
• 제46권3호
• /
• pp.413-420
• /
• 2024

A dual-band bio-implantable compact antenna with a meander-line structure is presented. The proposed meander-line antenna resonates at the industrial, scientific, and medical (2.4 GHz) and wireless medical telemetry (1.4 GHz) bands. The meander-line structure is selected as a radiating patch given its versatile and effective design. With a dimension of only 10 mm × 10 mm × 0.635 mm, the designed antenna is compact. Considering a skin phantom, the proposed antenna was designed, optimized, and simulated. The Rogers RT/duroid 6010 substrate material with high dielectric constant was used to fabricate the meander-line dual-band implantable antenna, which was validated experimentally. The superstrate was made of the same material. Experiments were conducted on skin-mimicking gel. The designed meander-line antenna has a high peak gain of -21 dBi at 2.4 GHz, and its maximum specific absorption rate is compliant with IEEE safety standards.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.811-817
• /
• 2014

본 논문에서는 2.45 GHz 무선 랜 (WLAN) 대역 과 UWB 대역에서 동작하는 이중 대역 모노폴 안테나에 대한 설계 방법을 연구하였다. UWB 대역에서 동작하는 모노폴 안테나를 먼저 설계한 후 모노폴에 슬롯을 삽입하여 2.45 GHz 무선 랜 대역에서도 동작하도록 설계하였다. 최적화된 이중 대역 모노폴 안테나를 FR4 기판 상에 제작하고 특성을 실험한 결과 전압 정재파비 (VSWR) < 2인 대역이 2.35-2.50 GHz와 2.99-11.82 GHz로 무선 랜과 UWB 대역에서 이중 대역 특성을 갖는 것을 확인하였다. 이득은 2.45 GH에서 1 dBi이고 3.1-10.6 GHz 대역에서 1.5-4.6 dBi로 측정되었다.

• 전기전자학회논문지
• /
• 제20권1호
• /
• pp.68-74
• /
• 2016

본 논문에서, 접힌구조의 기생소자를 갖는 이중대역을 저지하는 대역저지 UWB 안테나를 구현하였다. 제안된 안테나는 정육각형 평면 방사 패치를 갖는 안테나에 안테나의 윗면과 아랫면에 걸쳐 있는 접힌구조의 기생소자로 구성되어있다. 한가지 기법으로 하나의 대역을 저지시키는 기존의 다른 안테나와는 달리, 접힌구조의 기생소자는 하나의 간단한 구조를 통해 이중대역 저지를 만족한다. 접힌구조의 기생소자로 인해 이중대역은 WiMAX, C-band, 그리고 WLAN 대역을 저지시킨다. 제안된 안테나의 대역은 3.1~10.6 GHz에서 전압 정재파비는 이중대역저지 대역인 3.4~4.2 GHz, 5.15~6.00 GHz를 제외한 구간에서 2 이하를 만족한다.