• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.252-257
• /
• 2011

A compact microstrip dual-band bandpass filter with controllable bandwidth for each passband is proposed. Each passband is independently designed using two different dual-mode resonators. The proposed dual-band bandpass filter has three transmission zeros. Two transmission zeros are generated by each dual-mode resonator. An additional transmission zero is generated by input/output port coupling. The dual-band bandpass filter application is designed for 2.4/5.7 GHz WLAN. Experimental results are presented to validate theory.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.233-237
• /
• 2017

In this paper, a dual-band high frequency (HF) and ultra-high frequency (UHF) radio-frequency identification (RFID) tag antenna is presented that operates in the 13.56 MHz band as well as in the 920 MHz band. A spiral coil along the edges of the antenna substrate is designed to handle the HF band, and a novel meander open complementary split ring resonator (MOCSRR) dipole antenna is utilized to generate the UHF band. The dual-band antenna is supported by a single-feeding port for mono-chip RFID applications. The antenna is fabricated using an FR4 substrate to verify theoretical and simulation designs, and it has compact dimensions of $80mm{\times}40mm{\times}0.8mm$. The proposed antenna also has an omnidirectional characteristic with a gain of approximately 1 dBi.

• Journal of Digital Contents Society
• /
• v.7 no.1
• /
• pp.41-45
• /
• 2006

In this paper, we introduced the dual-band and multi-band slot loaded patch antenna for multi services. This antenna has the characteristic of dual-band and multi-band antenna by 4 slots nearly located in the edges of a patch. By changing the number and location of probe, the width and length of slot, and the distance between slot and the edge of patch, we studied the performance of dual-band and multi-band characteristic.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.93-97
• /
• 2022

Infrared scenes usually contain also spectral information which cannot be resolved using normal single-band infrared cameras. Multispectral infrared imaging cameras give access to the comprehensive information contained within infrared scenes. A Dual-band infrared Camera, a type of multispectral infrared imaging cameras, has the advantage of simple system. A Dual-band Infrared Camera gives access to the spectral information as wells as the temperature information within infrared scenes. Multispectral imaging generally increases the detection and identification performance of a Dual-band Infrared Camera. This paper describes a design of an infrared Camera using a Dual-band Infrared Detector to simultaneously receive infrared radiation from the medium-wave infrared/long-wave infrared(MWIR/LWIR) bands.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.418-422
• /
• 2003

In this paper a dual-band circularly polarized stacked microstrip antenna for Global Positioning System (GPS) service and Digital Multimedia Broadcasting (DMB) service is designed. By stacking two different corner-truncated square microstrip patches, dual-band, dual polarization characteristic is obtained. Experimental results show impedance bandwidth of 60 MHz (3.8%) and axial ratio bandwidth of 6 MHz (0.4%) in GPS and impedance bandwidth of 126 MHz (4.7%) and axial ratio bandwidth of 30MHz (1.1%) in DMB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.56-61
• /
• 2010

In this paper, high efficient power amplifier with dual band has been realized. Dual band power amplifier have used modify stub matching for single FET, center frequency 2.14GHz and 5.2GHz respectively. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of the all harmonic components is very difficult m dual-band, we have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Dual-band characteristics in the output has to balance. Two operating frequencies are chosen at 2.14 GHz and 5.2 GHz in this work. The measured results show that the output power of 28.56 dBm and 29 dBm was obtained at 2.14 GHz and 5.2 GHz, respectively. At this point, we have obtained the power-added efficiency (PAE) of 65.824 % and 69.86 % at two operation frequencies, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1282-1288
• /
• 2010

This paper proposes a novel microstrip patch antenna to make impedance matching possible by using slot/T-slot capacitive coupling between the patch and 50 $\Omega$ feed line on a ground plane. The single band/linear polarization patch antenna shows linear polarization at 2.4 GHz band. Under -10 dB return loss, the single band/linear polarization patch antenna obtains 50 MHz bandwidth at 2.37 GHz~2.42 GHz. The dual band/dual polarization microstrip patch antenna shows circular polarization at 2.4 GHz band and linear polarization at 3.1 GHz band. Under -10 dB return loss, The dual band/dual polarization microstrip patch antenna obtains 340 MHz bandwidth at 2.23~2.57 GHz and 375 MHz bandwidth at 2.95~3.325 GHz.

• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.629-634
• /
• 2018

A broad dual-band terahertz metamaterial filter with sharp out-of-band rejections is designed and demonstrated. The center frequencies of the first and the second bands occur at 0.35 THz and 0.96 THz with 3 dB relative bandwidth of 31% and 17%, respectively. Results are measured using a THz time-domain spectroscopy system that shows agreement with simulations. Physical mechanisms of the broad dual-band resonance are clarified based on transmissions of different structures and surface current density distributions. Influence of structure parameters on the transmission characteristics are discussed. Symmetry of the structure ensures the filter polarization independence at normal incidence. These results supported by the design of the filter could find applications in broad multi-band sensors, terahertz communication systems, and other emerging terahertz technologies.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.161-168
• /
• 2009

Ubiquitous application is in need of high-level technology to meet various requests for ubiquitous service. In order to adopt ubiquitous technology in not only pilot projects but also regional services, many projects like u-City are implemented in and outside the country. RFID has been known as one of the important technology to provide with core benefits of Ubiquitous services. Because each band of RFID technology has merits and demerits concurrently, single-band RFID system has limitations for various RFID services. Thus, we developed dual-band RFID system enable to provide with 13.56MHz and 2.45GHz RFID service at the same time to compensate the shortage of single-band RFID system. Also we have considered the way that the firmware would control signals without collision, studied battery life and range for tag, and made hardware for dual-band RFID service.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.105-112
• /
• 2010

Recently, wireless communication systems have been developed and the circuits which operate with the broad-band for multiband uses were introduced. However, broad-band circuits have problems that inevitably increase the size. Dual-band circuit operates only two frequency, therefore, it will be able to miniaturize through unnecessary decreased elements. The Wilkinson power divider is the one of the most commonly used components in wireless communication system for power division. Nowaday, the Wilkinson power divider is also demanded dual-band. In this paper, I propose miniaturized dual-band Wilkinson power divider operating at 2.45 GHz and 5.2 GHz for IEEE 802.11n standard. Proposed dual-band Wilkinson power divider is used in parallel stub line. The design is accomplished by transforming the electrical length and impedance of the quarter wave sections of the conventional Wilkinson power divider into dual band ${\pi}$-shaped sections.